1. Product Introduction
This curated CANALTA spare parts collection covers two key equipment categories: Daniel-built 4”/6” CANALTA orifice meter components and 2”-24” CANALTA separator replacement parts, organized by functional use for sealing, mechanical operation, flow control, and routine maintenance. All parts are direct-fit replacements designed to match original OEM dimensions and part numbers, requiring no on-site modification, cutting, or machining for installation.
2. Key Functional Specifications
- Orifice Meter Components: Precision 92 Edition carrier plates, Garlock seal bars, and valve seat screws designed to maintain accurate flow measurement (±0.5% reading tolerance) and prevent fluid bypass.
- Separator Components: Heavy-duty clamp bars, stainless steel shaft and gear assemblies, seal bars with grooves, and Teflon plate seals for smooth mechanical operation and leak-proof fluid separation.
- Sealing & Retention Parts: Custom stuffing box gaskets, packing kits, and bearing retainers that lock in lubrication, block debris, and extend the service life of moving parts.
- Maintenance & Hardware: High-tensile studs, clamp screws, grease guns, and valve seat grease designed for long-term durability in high-vibration, high-pressure operating conditions.
3. Structural & Quality Advantages
- OEM Compatibility: Exact dimensional matches for original CANALTA and Daniel part numbers, ensuring seamless installation and consistent performance.
- Material Durability: Corrosion-resistant 316 stainless steel and high-strength 4130 alloy steel withstand harsh well fluids, saltwater exposure, and extreme temperature fluctuations (-20°F to 250°F).
- Sealing Reliability: Garlock and Teflon sealing components offer minimal compression set (≤8% after 1,000 hours of use), eliminating leaks and maintaining pressure integrity.
- Compliance & Testing: Critical parts meet API 6A standards for oilfield equipment, with full material certification to ensure operational safety and regulatory compliance.
4. Applicable Operating Conditions
These CANALTA spare parts are engineered to perform reliably in the most demanding oil and gas operational environments:
- Equipment Compatibility: 4”/6” CANALTA orifice meters (Daniel-manufactured) and 2”-24” CANALTA separators
- Pressure Ratings: Up to 900 PSI working pressure for separator and orifice meter components
- Operational Settings: Onshore drilling rigs, offshore production platforms, well testing sites, and midstream pipeline facilities
- Fluid Compatibility: Crude oil, produced water, drilling mud, and standard pipeline gases
- Service Modes: 24/7 continuous operation, periodic well testing, and scheduled maintenance cycles
5. Preventive Maintenance & Service Recommendations
Follow these field-tested maintenance steps to maximize part lifespan and avoid costly equipment downtime:
- Daily Visual Checks: Inspect seal bars and gaskets for wear, verify grease levels at valve seats, and check for fluid leaks at stuffing boxes and fittings.
- Weekly Inspections: Tighten clamp screws and studs to recommended torque specs, clean bleeder valves, and lubricate shaft and gear assemblies.
- 500-Hour Service: Replace worn seal bars, stuffing box gaskets, and valve seat grease; inspect bearing plugs and retainers for damage.
- 2,000-Hour Overhaul Prep: Replace packing kits, valve seats, and valve strips; realign separator shaft and gear assemblies.
- 10,000-Hour Major Overhaul: Replace all sealing components, bearings, and fasteners; recalibrate orifice meter for accurate flow readings.
CANALTA Parts list
| Slno | PID | Unit | Description | ||
| 1 | 0194933 | Each | CARRIER-92 EDITION PLATE-FOR 6″ CANALTA ORIFICE METER- MATERIAL: 4130-ORIFICE | ||
| P/N: P/N: 660DC08-92, Make: DANIEL | |||||
| 2 | 0194934 | Each | SEAL BAR-GASKET SEAL BAR-FOR 6″ CANALTA ORIFICE METER- MATERIAL: GARLOCK, 1/16″ THICK-ORIFICE | ||
| P/N: P/N: 660DC09A, Make: DANIEL | |||||
| 3 | 0194944 | Each | SCREW-VALVE SEAT SCREW-FOR 6″ CANALTA ORIFICE METER–ORIFICE | ||
| P/N: P/N: C60DC18D, Make: DANIEL | |||||
| 4 | 0194834 | Each | BLEEDER-2″-12″-FOR 4″/ 6″ ORIFICE METER CANALTA–ORIFICE | ||
| P/N: P/N: C60DC10, Make: DANIEL | |||||
| 5 | 0208098 | Each | DC CLAMP BAR 2″ FOR SEPARATOR – CANALTA | ||
| P/N: P/N: 260DC12, Make: – | |||||
| 6 | 0208103 | Each | DC PLATE CARRIER 2″ ( 92 EDITION) FOR SEPARATOR – CANALTA | ||
| P/N: P/N: 260DC08-92SS, Make: – | |||||
| 7 | 0208104 | Each | DC SEAL BAR 2″ WITH GROOVE FOR SEPARATOR – CANALTA | ||
| P/N: P/N: 260DC09G, Make: – | |||||
| 8 | 0208106 | Each | TEFLON PLATE SEAL 2″ SET 2000ED FOR SEPARATOR – CANALTA | ||
| P/N: P/N: 260DC081J-00, Make: – | |||||
| 9 | 0208102 | Each | SHAFT & GEAR SS 2″ FOR SEPARATOR – CANALTA | ||
| P/N: P/N: 260DC05SS, Make: – | |||||
| 10 | 0208099 | Each | VALVE SEAT SS 2″ FOR SEPARATOR – CANALTA | ||
| P/N: P/N: 260DC18A-SS, Make: – | |||||
| 11 | 0208101 | Each | VALVE STRIP 2″ FOR SEPARATOR – CANALTA | ||
| P/N: P/N: 260DC03, Make: – | |||||
| 12 | 0208020 | Each | 2″-24″ BEARING PLUG FOR SEPARATOR – CANALTA | ||
| P/N: P/N: c60dc19, Make: – | |||||
| 13 | 0194854 | Each | RETAINER BEARING-2″-10″-FOR 4″ ORIFICE METER CANALTA- MATERIAL: SS 316- | ||
| P/N: P/N: C60DC28A-SS, Make: DANIEL | |||||
| 14 | 0194839 | Box | GREASE-VALVE SEAT GREASE-ONE BOX = 24 STICKS– | ||
| P/N: P/N: C60DC54, Make: DANIEL | |||||
| 15 | 0208091 | Each | CLAMP BAR SCREW 2″ -20″, 150 – 900 (CS) FOR SEPARATOR -CANALTA | ||
| P/N: P/N: C60DC11, Make: – | |||||
| 16 | 0194859 | Each | EQUALIZER ASSY-VALVE EQUALIZER-FOR 4″/ 6″ ORIFICE METERCANALTA–ORIFICE | ||
| P/N: P/N: C60DC01, Make: DANIEL | |||||
| 17 | 0210631 | Each | GREASE CHECK–FOR SEPERATOR- -CANALTA | ||
| P/N: P/N: C60DC24, Make: – | |||||
| 18 | 0194840 | Each | GRESE GUN ASSY–FOR 4″/ 6″ ORIFICE METER CANALTA-MATERIAL:AISI 1018-ORIFICE | ||
| P/N: P/N: C60DC23, Make: DANIEL | |||||
| 0194935 | KIT-PACKING ASSY KIT-FOR 6″ CANALTA ORIFICE METER– ORIFICE | ||||
| P/N: P/N: C60DC25S2, Make: DANIEL | |||||
| 0194939 | NUT PACKING-2″-24″-FOR 6″ CANALTA ORIFICE METER- MATERIAL: 4130-ORIFICE | ||||
| P/N: P/N: C60DC25, Make: DANIEL | |||||
| 0208096 | STUD 18UNF, YZP FINISH 5/8″ X 2-1/4″ FOR SEPARATOR – CANALTA | ||||
| P/N: P/N: DC33S58-214, Make: – | |||||
| 0194853 | STUFFING BOX-2″-12″-FOR 4″ ORIFICE METER CANALTA- MATERIAL: 4130- | ||||
| P/N: P/N: C60DC20, Make: DANIEL | |||||
| 0208018 | 2″-24″ STUFFING BOX GASKETS MATERIAL FOR SEPARATOR -CANALTA | ||||
| P/N: P/N: c60dc22a, Make: – | |||||
| 0208019 | STUFFING BOX GLAND 316SS FOR SEPARATOR – CANALTA | ||||
| P/N: P/N: C60DC26ss, Make: – | |||||
| 0208003 | VALVE SEAT STOP PIN 18:8 MATERIAL FOR SEPARATOR – CANALTA | ||||
| P/N: P/N: C60DC17A, Make: – | |||||
6. Field Failure Repair Cases (Real Job Site Scenarios)
Case 1: Orifice Meter Seal Leak & Flow Reading Inaccuracy
Issue: A 6” CANALTA orifice meter developed fluid leaks at the seal bar, leading to inconsistent flow measurements and halted well testing.
Root Cause: Worn Garlock seal bars lost compression, creating gaps that allowed fluid bypass and disrupted metering accuracy.
Resolution: Installed genuine replacement seal bars (660DC09A) and new valve seat screws, re-torqued all hardware, and pressure-tested the unit. Leaks were eliminated, and flow accuracy was fully restored.
Case 2: Separator Shaft & Gear Wear & Mechanical Jamming
Issue: A 2” CANALTA separator experienced excessive vibration and gear jamming, stopping fluid separation operations.
Root Cause: Lack of lubrication and worn stainless steel shaft & gear assembly caused misalignment and tooth damage.
Resolution: Replaced the shaft & gear assembly (260DC05SS), installed new bearing plugs, and applied premium valve seat grease. Smooth operation resumed with no further jamming.
Case 3: Stuffing Box Leak & Lubricant Loss
Issue: Persistent lubricant leaks from the stuffing box of a CANALTA orifice meter led to premature bearing wear and safety hazards.
Root Cause: Degraded stuffing box gaskets and a worn gland failed to retain lubrication, allowing contamination and fluid loss.
Resolution: Fitted new stuffing box gaskets and a 316SS stuffing box gland, replaced the packing kit, and resealed the assembly. Leakage stopped completely, and bearing life was extended.
7. Frequently Asked Questions (FAQ)
| Question | Answer |
| Are these parts direct fits for CANALTA 4”/6” orifice meters and 2”-24” separators? | Yes, every part is designed to match OEM dimensions and part numbers, ensuring 100% bolt-on fit with no modifications needed. |
| Do these sealing components hold up to high-pressure oilfield conditions? | Absolutely. All seals and gaskets are rated for up to 900 PSI and resist degradation from oil, water, and drilling fluids. |
| Can this parts list support full equipment overhauls? | Yes. It includes all critical components: seals, shafts, gears, fasteners, and maintenance parts to complete a full overhaul of CANALTA orifice meters and separators. |
8. Procurement Guidance & Call to Action
For operators maintaining CANALTA 4”/6” orifice meters and 2”-24” separators, sourcing high-quality, compatible spare parts is essential to reducing unplanned downtime, ensuring accurate flow measurement, and maintaining safe, compliant operations. This parts list serves as a definitive procurement standard and technical reference, streamlining your ordering process for emergency repairs, routine maintenance, and full equipment overhauls.
