GE Industrial Electrical Components: Genuine Replacement Parts for Control & Power Systems

1.Product Introduction

This GE electrical parts suite covers five high-demand industrial categories: motor control components (brushes, brush holders, rectifiers, thyristors), PACSystems RX3i PLC modules (CPU, Ethernet, I/O, power supplies), circuit breakers and protection devices (thermal-magnetic breakers, contactors, relays), control hardware (switches, emergency stops, sensors), and generator/exciter parts (field exciters, poles, bearings). All parts are direct-fit replacements engineered to match original GE part numbers and system schematics, requiring no on-site modification or rewiring for installation.

2. Key Functional Specifications

• Motor Control Parts: Carbon brushes, brush holders, and rectifiers designed for 150A-300A generator exciters and heavy-duty motors, ensuring consistent power transmission and minimal sparking at commutation poles.
• PLC PACSystems RX3i Components: 24VDC power supplies, Ethernet/Profibus communication modules, analog/digital I/O cards, and CPU modules supporting 10/100 Mbps data transfer and 32-point I/O control for industrial automation.
• Power Protection Devices: Thermal-magnetic circuit breakers (16A-630A), contactors, and 110V protection relays with 50kA short-circuit breaking capacity, safeguarding equipment from overcurrent and short-circuit damage.
• Control & Communication Parts: Industrial Ethernet switches, emergency stop buttons, and isolation amplifiers ensuring reliable operator control and stable system communication in high-interference environments.

3. Structural & Quality Advantages

• Global Compliance: All parts meet IEC, UL, IEEE, and CE electrical safety standards, with certified performance ratings for industrial and hazardous location use.
• Precision Engineering: Electrical contacts and PLC modules undergo strict quality testing, with contact resistance ≤5mΩ and PLC signal accuracy ±0.1% for reliable performance.
• Durability: Motor brushes feature low-wear graphite formulation (wear rate ≤0.02mm per 1000 hours); circuit breakers have a mechanical lifespan of 10,000+ operating cycles.
• Plug-and-Play Compatibility: Full cross-referencing with original GE part numbers for seamless replacement of worn components in existing control systems.

4. Applicable Operating Conditions

These GE electrical components are validated for use in demanding industrial environments, performing reliably under these conditions:

• Operating Voltage: 24VDC control circuits, 110V-400VAC power distribution systems
• Current Range: 16A to 630A for circuit protection, 150A-300A for generator excitation
• Environmental Limits: Ambient temperatures -20℃ to 60℃, high-humidity industrial sites, dusty manufacturing facilities, and oilfield drilling platforms
• Applications: Industrial automation, motor control centers, power distribution panels, generator sets, drilling equipment, and manufacturing production lines

5. Preventive Maintenance & Service Recommendations

Follow these field-proven maintenance steps to extend part life and avoid unexpected GE electrical system failures:

1. Monthly Checks: Inspect motor brushes for wear (replace if length is below 50% of original), tighten electrical connections, and test circuit breaker trip functionality.
2. Quarterly Inspections: Clean PLC module contacts and Ethernet ports, check brush holder springs for tension, and verify relay and contactor operation.
3. Annual Service: Calibrate protection relays, replace worn brush sets and contact tips, update PLC firmware, and test emergency stop devices for proper function.
4. Component Replacement Guidelines: Replace motor brushes every 8000 operating hours, circuit breakers every 10 years, and PLC communication modules at the first sign of signal interference.

We supply the following spare parts:

ligne	Code interne	designation	réference
2.2.1	20282.01144	* REDRESSEUR	IC3500A411DG2
2.2.2	20282.01266	* PORTE BALAI	36A160422AAG02
2.2.3	20282.01272	* POLE DE COMMUTATION	36A160736AAG01
2.2.4	20282.01278	* BALAIS	36A161402AAP3
2.2.5	20282.01286	* BALAIS *	36A164453AAP01
2.2.6	20282.01289	* POLE DE COMMUTATION	36A163797AFG01
2.2.7	20282.01298	* CHARBONS *	36A164452BA001
2.2.8	20282.01308	* PALIER LISSE	36C695406AEG01
2.2.9	20282.01421	* POLE DE COMMUTATION	893A279ARG03
2.2.10	20282.01432	* PORTE BALAIS *	894A684G4
2.2.11	20282.01542	* RESSORT DE PORTE BALAIS	626B207G1
2.2.12	20282.01560	* POLE PRINCIPAL	36A162376AAG03
2.2.13	20282.01630	* POLE DE COMMUTATION	8842624G1
2.2.14	20282.01734	* BALAI	36A164453BAP01
2.2.15	20282.01829	* COUSSINET	597C992G01
2.2.16	20282.01844	* INTERRUPTEUR	41A251348
2.2.17	20282.01963	* PALIER SLEEVE BEARING *	525D751 HOIEE ACI
2.2.18	20282.02166	* PORTE BALAI	3674563G1
2.2.19	20282.02422	* BOLT	124A9303FR096
2.2.20	20282.02734	* RESSORT *	36B465081AA001
2.2.21	20282.02735	* RESSORT *	36B465082AAG01
2.2.22	20282.02736	* RESSORT *	36B465083AA001
2.2.23	20282.03582	* AMPLIFICATEUR D’ISOLEMENT	17FM394A2
2.2.24	20282.03585	* BLOC D’ALLUMAGE	17FM415A1
2.2.25	20282.04055	* BALAIS T 900	41B535453P6
2.2.26	20282.04411	* THYRISTOR POUR MOUVEMENT	68A7208P20A9239
2.2.27	20282.04526	* RESISTANCE V.D.R	17FM363B1
2.2.28	20282.04599	* MODULE	41A278053G2
2.2.29	20282.04608	* DIGITAL I/O	17FB103B2
2.2.30	20282.04961	* MODULE EXITATION MOTEUR	17FM467D1
2.2.31	20282.05101	* TYRISTOR	C155E
2.2.32	20282.05463	* POLE PRINCIPAL AVEC CIRCUIT MAGNETIQUE ET BARRE DE COMPENSATION	36A162357AAG01
2.2.33	20282.05493	* CARTE ANALOGIQUE	17FB140B1
2.2.34	20282.05494	* CARTE CPU	17FB144B3
2.2.35	20282.05515	* REVERSING CONTACTEUR	41A296327AJP1
2.2.36	20282.05670	* RELAIS DE PROTECTION 110V	F650NFBF1G0HIF
2.2.37	20282.05799	* SWITCH INDUSTRIEL MULTILINK	GE-ML1600-HI-A4-A4-XX
2.2.38	20282.05984	* DISJONCTEUR FIXE FE250 GTM-3P-160A-50KA-400V- IM=800-1600A	432971
2.2.39	20282.06018	* ARRÊT D’URGENCE À COUP DE POING TOURNER POUR DÉVERROUILLER	101373
2.2.40	20282.06062	* DISJONCTEUR FG630 RECORD PLUS	430103
2.2.41	20282.06063	* DISJONCTEUR FG400 RECORD PLUS	438432
2.2.42	20282.06120	* INTERRUPTEUR DIFFERENTIEL BP AC 4P 63 A 300 mA	606226
2.2.43	20282.06178	* BORNIER	IC694TBS032
2.2.44	20282.06179	* CABLE DE RACK D’EXTENSION	IC693CBL300
2.2.45	20282.06180	* MODULE CHASSIS DE BASE RX3I 16 EMPLACEMENTS	IC695CHS016
2.2.46	20282.06181	* ALIMENTATION 24VDC POLYVALENT	IC695PSD140
2.2.47	20282.06182	* MODULE ETHERNET 10/100 MBITS,2 RJ45	IC695ETM001
2.2.48	20282.06184	* MODULE DE COMMUNICATION SÉRIE, 2 PORTS	IC695CMM002
2.2.49	20282.06185	* KIT RX3I ETHERNET NIU AVEC DEUX MODULES ETHERNET	IC695NKT001
2.2.50	20282.06186	* ENTRÉE DU MODULE TOR 24VDC 32 POINTS	IC694MDL660
2.2.51	20282.06187	* MODULE ENTRÉE ANALOGIQUES, 16 CANAUX	IC695ALG626
2.2.52	20282.06188	* ENTRÉE ANALOGIQUE	IC695ALG616
2.2.53	20282.06189	* MODULE DE SORTIE 0.75A, SORTIE 32 POINTS	IC694MDL754
2.2.54	20282.06190	* PROFIBUS MASTER MODULE	IC695PBM300
2.2.55	20282.06191	* MODULE D’EXTENSION PACS SYSTEMS RX3i	IC695LRE001
2.2.56	20282.06192	* PLAQUE D’EXTENSION D’EXTENSION SÉRIE À 10 EMPLACEMENTS PACSYSTEMS RX3I	IC694CHS392
2.2.57	20282.06193	* ALIMENTATION 24VDC HAUTE CAPACITÉ	IC694PWR331
2.2.58	20282.06194	* MODULE DE SORTIE DE TENSION 0,5A, 32 POINTS	IC694MDL752
2.2.59	20282.06197	* FICHE DE TERMINAISON DE BUS ENTREE/SORTIE	IC693ACC307
2.2.60	20282.06224	* DISJONCTEUR	674005
2.2.61	20282.06225	* DISJONCTEUR	674001
2.2.62	20282.06227	* DISJONCTEUR	604259
2.2.63	20282.06228	* DISJONCTEUR	604253
2.2.64	20282.06229	* DISJONCTEUR	604251
2.2.65	20282.06230	* DISJONCTEUR	604252
2.2.66	20282.06251	* DISJONCTEUR MAGNETO-THERMIQUE	672279
2.2.67	20282.06254	* DISJONCTEUR MAGNETO-THERMIQUE	674010
2.2.68	20282.06255	* DISJONCTEUR MAGNETO-THERMIQUE	674014
2.2.69	20282.06257	* DISJONCTEUR MAGNETO-THERMIQUE	674029
2.2.70	20282.06518	* EXCITATEUR DE CHAMP 150A	8M13151B0
2.2.71	20282.06519	* EXCITATEUR DE CHAMP 300A	8M13301B0
2.2.72	20282.06524	* CONTACTEUR	41A296327AMP2
2.2.73	20282.06527	* PROFIBUS NIU NETWORK INTERFACE	IC200PBI001
2.2.74	20282.06528	* POWER SUPPLY 120/240VAC	IC200PWR102
2.2.75	20282.07036	* CONTACT	3X6660
2.2.76	20282.07037	* CONTACT	3X6659
2.2.77	20282.03548	* AMPLIFICATEUR IA1-IA2	17FM390A2
2.2.78	20282.01267	* PORTE BALAI	36A160423AAG01
2.2.79	20282.01269	* PORTE BALAI	36A160427AAG01
2.2.80	20282.01290	* POLE DE COMMUTATION	36A163816ARG01
2.2.81	20282.01541	* RESSORT DE PORTE BALAIS	626B206G1
2.2.82	20282.02417	* L’NUT	124A4934AA024
2.2.83	20282.02418	* L’WASH	124A4935AA024
2.2.84	20282.02420	* SCREW	124A9301BD028
2.2.85	20282.02421	* SCREW	124A9301BD036
2.2.86	20282.04598	* MODULE	41A279579G1
2.2.87	20282.04600	* PANNEAU	17FM384C1
2.2.88	20282.04962	* MODULE EXITAT ALTERNATEUR	17FM466F1
2.2.89	20282.05562	* PORTE BALAIS D’ALTERNATEUR	41B531649G2
2.2.90	20282.05622	* CONTACTEUR	17CM55AH6
2.2.91	20282.05798	* SWITCH INDUSTRIEL MULTILINK	GE-ML2400-F-AC-XX-A4-A4-XX-XX-X
2.2.92	20282.01631	* POLE PRINCIPAL	8842625G1
2.2.93	20282.07201	* AMPLIFICATEUR D’ISOLEMENT TENSION	17FM458A2
2.2.94	20492.57672	* PANEL RX3I	EMERSON REF : IC758CSWB24PC128

6. Field Failure Repair Cases (Real Industrial Scenarios)

Case 1: Motor Brush Wear & Exciter Failure

Issue: A heavy-duty industrial motor experienced intermittent power loss and sparking at the commutation poles, halting production.

Root Cause: Excessive wear on carbon brushes (36A164453AAP01) and weakened brush holder springs, leading to poor electrical contact.

Resolution: Installed genuine GE replacement brushes and new brush holder springs, adjusted brush pressure, and cleaned commutation poles. Normal motor operation was restored within 2 hours, with no further sparking issues.

Case 2: PLC Ethernet Communication Loss

Issue: A PACSystems RX3i control system lost Ethernet connectivity, disrupting automated production line operations.

Root Cause: Faulty Ethernet module (IC695ETM001) with damaged port circuitry, causing data transmission failure.

Resolution: Swapped in a new GE Ethernet module, reconfigured network settings, and tested communication links. Full connectivity was restored, with stable 10/100 Mbps data transfer resuming.

Case 3: Circuit Breaker Overload Trip Failure

Issue: A thermal-magnetic circuit breaker failed to trip during an overcurrent event, damaging downstream electrical equipment.

Root Cause: Worn internal breaker components and degraded trip mechanism, leading to loss of overcurrent protection.

Resolution: Replaced the faulty breaker with a genuine GE unit, tested trip settings, and inspected wiring for damage. Proper overcurrent protection was restored, preventing further equipment risk.

7. Frequently Asked Questions (FAQ)

Question	Answer
Are these parts genuine GE replacements for PACSystems RX3i PLCs?	Yes, all PLC modules, power supplies, and accessories are genuine GE components, fully compatible with RX3i chassis and systems, with plug-and-play installation.
Do these circuit breakers meet international industrial safety standards?	All GE breakers, contactors, and relays comply with IEC 60947, UL 508, and CE standards, with certified short-circuit breaking capacity and overload protection ratings.
Can these motor brushes fit GE industrial generators and exciters?	Yes, these carbon brushes and brush holders are engineered specifically for GE 150A-300A field exciters and heavy-duty motors, matching OEM dimensions and performance specs.

8. Procurement Guidance & Call to Action

For industrial facilities, power plants, and drilling operations relying on GE electrical control and power systems, securing genuine, high-quality replacement parts is critical to minimizing unplanned downtime, maintaining operational efficiency, and upholding electrical safety standards. This parts list serves as a definitive procurement standard and technical reference, simplifying your sourcing process for emergency repairs, scheduled maintenance, and full system overhauls.