Product Overview
This curated parts catalog is exclusively engineered for the TPD600/TPE600 mud pump, a heavy-duty reciprocating mud pump widely deployed in oilfield drilling, water well drilling, and geotechnical construction projects. Designed to meet OEM-equivalent performance standards, these replacement parts target the critical pain points of drilling operators: unplanned downtime, premature part failure, inconsistent fluid delivery, and costly maintenance delays.
Primary Functions
- Seal critical shaft and housing interfaces to prevent oil leakage and mud intrusion, eliminating cross-contamination of lubrication systems
- Support heavy-duty crankshaft and gear reducer operation, absorbing radial and axial loads up to 120,000 lbs of dynamic force
- Maintain consistent fluid pressure in the 4.5” fluid end assembly, preventing cavitation and flow irregularities during drilling cycles
- Insulate magnetic seal components and reduce mechanical wear on rotating shafts, extending service life by 30% compared to standard aftermarket parts
- Protect power swivel and pump exterior components from mud splatter and abrasive debris in harsh drilling environments
Structural & Material Advantages
- Crafted from high-grade alloy steel, heat-treated nitrile rubber, and industrial-grade composite materials to resist abrasion, corrosion, and thermal fatigue (operating temperature range: -40°F to 250°F)
- Featuring TIMKEN tapered roller bearing assemblies (LM739749/LM739710, 744/742) for heavy-load radial support, meeting API 7K drilling equipment standards
- Precision-machined gaskets (2.0mm thickness) and O-ring seals with 90-durometer rubber compound for zero-leak compression fit
- Modular design for quick field replacement, reducing assembly/disassembly time by 45% versus generic replacement parts
- Compliant with SAE J30 R6 standards for flexible oil hoses, ensuring resistance to oil degradation and abrasive wear
Applicable Operating Conditions
These TPD600 mud pump parts are engineered for rigorous onshore and offshore drilling scenarios, including:
- Land-based oil/gas drilling rigs with 150T power swivel attachments
- Water well drilling operations with high-volume mud circulation requirements
- Geothermal and directional drilling projects with sustained high-pressure pumping
- Heavy-duty construction drilling with abrasive slurry and mud mixtures
- Remote drilling sites with limited maintenance access and extended equipment runtime
Maintenance & Service Recommendations
To maximize part lifespan and prevent unexpected failures, adhere to these industry-standard maintenance protocols for TPD600 mud pump components:
- Conduct visual inspections of seals, gaskets, and O-rings every 250 drilling hours; replace worn components before cracks or hardening occur
- Lubricate bearing assemblies and gear reducer components with API-certified extreme-pressure gear oil every 500 hours to reduce friction and heat buildup
- Torque all retaining rings and fasteners to OEM specifications (180-220 ft-lbs) during installation to avoid loose fittings and vibration damage
- Inspect fluid end valve inserts and seats for erosion damage every 300 hours; replace worn parts to maintain pressure consistency
- Store spare parts in a dry, temperature-controlled environment to prevent rubber seal degradation and metal corrosion
- Document all part replacements and maintenance activities to track wear patterns and schedule proactive replacements
We supply the following spare parts:
| # | Product Name |
| 1 | SEAL,MAGNETIC,SHAFT,MSC,65152 REV B P/N P15-05-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 2 | RING,RETAINING P/N P15-08-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 3 | OUTSIDE BEARING HOUSING GASKET 2.0MM P/N P61-12-005 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 4 | OUTSIDE BEARING HOUSING GASKET P/N P60-12-005 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 5 | SPACER P/N P60-14-019 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| 6 | SEAL ASSEMBLY P/N P60-14-300 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| 7 | O-RING, P/N 000P569255 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| 8 | PINION P/N P60-14-020 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| 9 | RING,SEAL P/N P15-04-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 10 | BUSHING,MAGNETIC,SEAL INSULATOR & COUNTER DRIVE P/N P15-03-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 11 | GASKET,INJUCTOR,CRANKSHAFT,OIL W/#20 ADAPTER P/N P15-09-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 12 | O-RING (CRANK SHAFT ASSY), P/N 000N569120, FOR MUD PUMP TPD600, MAKE-SERVA (AOS REF: FOR HW UNITS) |
| 13 | O-RING (CRANK SHAFT ASSY), P/N 000N569126, FOR MUD PUMP TPD600, MAKE-SERVA (AOS REF: FOR HW UNITS) |
| 14 | BULL GEAR BEARING ASSY, P/N P60-14-400 (TIMKEN TAPPERED ROLLER BEARING SET LM739749 & LM739710)FOR MUD PUMP GEAR REDUCER ASSY MODEL TPD600, MAKE-SERVA (AOS REF FOR MUD PUMP, HW UNITS). |
| 15 | BEARING,SMALL,ASSY, P/N P60-14-100 (TIMKEN TAPPERED ROLLER BEARING SET 744 & 742)FOR MUD PUMP GEAR REDUCER ASSY MODEL TPD600, MAKE-SERVA (AOS REF FOR MUD PUMP, HW UNITS). |
| 16 | BEARING,MAIN,OUTSIDE,FIXED,HEAVY DUTY P/N P60-12-024 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 17 | DIESEL HOSE,3/4″, SAE J30 R6, FLEXIBLE, OIL AND ABRASIVE RESISTANT |
| 18 | D-RING,P/N 7000014374,(HW-PURC-MEPU-001)3.620″ ID X .368″ CS X .497″ HT MOLDED,4.5” FLUID END ASSY,MUD PUMP,TPE600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| 19 | MUD SHIELD, 150T POWER SWIVEL,P/N HET-PS15-P001, DRG: HET-PS15-S001,POWER SWIVEL PS 15 ,MAKE HIGHWOOD |
| 20 | BALL BEARING Part No: 3L-1425 |
| 21 | AIR FILTER ELEMENT F/ INGERSOLL 54672522 |
| 22 | SEAL SLEEVE, UPPER, 150T POWER SWIVEL,P/N HET-PS15-M003, DRG: HET-PS15-S001,POWER SWIVEL PS 15 ,MAKE HIGHWOOD |
| 23 | D-RING,P/N 7000000459,ITEM-1,4-1/2″-PLUNGER PACKING ASSEMBLY, MUD PUMP,TPE600, MAKE-SERVA (AOS REF FOR, P66-44-010 ,HW UNITS) |
| 24 | BEARING AS-BALL Part No: 8H-9789 |
| 25 | VALVE INSERT,P/N P60-34-601,4.5” FLUID END ASSY,MUD PUMP,TPE600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| 26 | VALVE SEAT,P/N P60-34-008,(HW-PURC-MEPU-004),4.5” FLUID END ASSY,MUD PUMP,TPE600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| 27 | Gill model 600 Drag Ring Assy (6″ Bore 1-1/4″ Pin) – D504-A |
| 28 | Chart drive SONCEBOZ P/No.820R mouting plate A 1/4″ dia CCW Test time 15 min/ 60 min,Quartz controlled |
| 29 | SEAL SLEEVE, LOWER, 150T POWER SWIVEL,P/N HET-PS15-M002, DRG: HET-PS15-S001,POWER SWIVEL PS 15 ,MAKE HIGHWOOD |
| 30 | AIR JUNCTION BOXES -GASKET JG-24 PART No. 0910-1303 |
| 31 | PACKING,P/N P66-44-010,(HW-PURC-MEPU-010),SPS,ASSY,4.500,4.5” FLUID END ASSY,MUD PUMP,TPE600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| 32 | BODY,VALVE,P/N P60-34-602,(HW-PURC-MEPU-006),4.5” FLUID END ASSY,MUD PUMP,TPE600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| 33 | O-RING, P/N 000P569255 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| 34 | OUTSIDE BEARING HOUSING GASKET 2.0MM P/N P61-12-005 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 35 | BEARING,MAIN,OUTSIDE,FIXED,HEAVY DUTY P/N P60-12-024 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 36 | BUSHING,MAGNETIC,SEAL INSULATOR & COUNTER DRIVE P/N P15-03-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 37 | RING,SEAL P/N P15-04-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 38 | RING,RETAINING P/N P15-08-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 39 | O-RING (CRANK SHAFT ASSY), P/N 000N569126, FOR MUD PUMP TPD600, MAKE-SERVA (AOS REF: FOR HW UNITS) |
| 40 | O-RING (CRANK SHAFT ASSY), P/N 000N569120, FOR MUD PUMP TPD600, MAKE-SERVA (AOS REF: FOR HW UNITS) |
| 41 | PINION P/N P60-14-020 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| 42 | BULL GEAR BEARING ASSY, P/N P60-14-400 (TIMKEN TAPPERED ROLLER BEARING SET LM739749 & LM739710)FOR MUD PUMP GEAR REDUCER ASSY MODEL TPD600, MAKE-SERVA (AOS REF FOR MUD PUMP, HW UNITS). |
| 43 | SPACER P/N P60-14-019 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| 44 | SEAL,MAGNETIC,SHAFT,MSC,65152 REV B P/N P15-05-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| 45 | BEARING,SMALL,ASSY, P/N P60-14-100 (TIMKEN TAPPERED ROLLER BEARING SET 744 & 742)FOR MUD PUMP GEAR REDUCER ASSY MODEL TPD600, MAKE-SERVA (AOS REF FOR MUD PUMP, HW UNITS). |
| 46 | OUTSIDE BEARING HOUSING GASKET P/N P60-12-005 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
Field Failure Repair Cases
Case 1: Crankshaft Oil Leakage (Onshore Oil Drilling Rig)
A TPD600 mud pump experienced severe crankshaft oil leakage during a 6,000ft drilling operation, causing lubrication loss and overheating. Inspection revealed worn magnetic shaft seals (P/N P15-05-031) and cracked seal rings (P/N P15-04-031). Replacing both components with the cataloged parts eliminated leaks and restored normal crankshaft operation within 2 hours.
Case 2: Gear Reducer Bearing Failure (Water Well Drilling Site)
A TPD600 mud pump gear reducer developed excessive noise and vibration due to failed small bearing assemblies (P/N P60-14-100). The TIMKEN tapered roller bearings were replaced, resolving radial load issues and reducing gear backlash. The pump resumed full operation with no recurring issues for 1800+ drilling hours.
Case 3: Fluid End Pressure Loss (Directional Drilling Project)
A TPD600 mud pump suffered inconsistent mud pressure and flow due to eroded valve inserts (P/N P60-34-601) and worn valve seats (P/N P60-34-008). Swapping the damaged fluid end components restored 7200 PSI operating pressure, eliminating cavitation and keeping the drilling schedule on track.
Technical Support & Purchasing Guidance
Frequently Asked Questions (FAQ)
| Question | Answer |
| Are these parts fully compatible with the SERVA TPD600 mud pump original equipment? | Yes, every part is precision-engineered to match OEM dimensional specifications, material standards, and performance ratings for direct fitment with SERVA TPD600/TPE600 mud pumps, no modifications required. |
| How do I identify the correct replacement part for my TPD600 mud pump failure? | Cross-reference the part number listed in this catalog with your pump’s service manual or failed component part number; focus on crankshaft assembly, gear reducer, and 4.5” fluid end part families for targeted replacements. |
| What is the expected service life of these TPD600 mud pump replacement parts? | Under normal drilling conditions and proper maintenance, bearings and structural components last 1500-2000 drilling hours; seal and gasket assemblies last 500-800 drilling hours, depending on abrasive exposure and operating pressure. |
Procurement Call to Action
Secure high-quality, OEM-equivalent TPD600 mud pump replacement parts to eliminate unplanned downtime, reduce maintenance costs, and sustain peak drilling performance. This parts list provides a standardized procurement benchmark for drilling operators, maintenance crews, and supply chain teams, ensuring you source reliable components that meet API and industrial drilling standards. Submit your part-specific inquiries with detailed part numbers and application requirements to access customized quotes, technical specifications, and expert compatibility support. All parts are manufactured to strict quality control protocols, delivering consistent performance for even the most demanding drilling environments.
