Product Introduction
This comprehensive Goulds 4X6X14″ 4JC-14 pump parts collection covers all critical wear components, rotating parts, sealing elements, and drivetrain accessories for routine maintenance, full pump overhauls, and emergency field repairs. Included are OEM-matched liners, 14″ impellers, Teflon seal cages, precision shafts, bearings, packing sets, and driveline assemblies (Spicer 1410/1810 series), each labeled with original Goulds part numbers for easy cross-referencing and inventory management. All components undergo strict quality testing, ensuring drop-in compatibility and consistent performance for the 4JC-14 pump model.
Functional Specifications
- Fluid Handling & Wear Protection: Suction liners, 14″ impellers, and shaft sleeves direct fluid flow efficiently while resisting abrasion from slurry and particulate-laden liquids
- Sealing & Leak Prevention: Teflon seal cages, Garlock packing sets, and dual-size O-rings create tight, durable seals to prevent fluid leakage and contamination
- Rotational Stability: Thrust bearings, radial bearings, and bearing retainers absorb radial and axial loads, reducing friction and minimizing vibration during high-speed operation
- Drivetrain Compatibility: Spicer 1410/1810 series universal bearings and driveline assemblies deliver reliable torque transfer for smooth pump operation
- Monitoring & Safety: Diaphragm-type pressure gauges provide real-time fluid pressure monitoring, replacing obsolete sender units for improved accuracy
Structural Design Features
- High-chrome alloy impellers and liners with 60+ HRC hardness, offering exceptional abrasion resistance for slurry applications
- Precision-ground 4140 steel shafts with tight dimensional tolerances (±0.0015″) for balanced rotation and extended bearing life
- Teflon seal cages and Garlock packing sets rated for 8,000+ operating hours, resisting chemical degradation and thermal fatigue
- Heavy-duty Spicer universal bearings (1410/1810 series) with high load-bearing capacity, engineered for continuous driveline duty
- Modular, drop-in design for quick field installation, cutting pump repair labor time by up to 40% compared to custom-fitted generic parts
Applicable Operating Conditions
These Goulds 4JC-14 pump parts are designed for heavy-duty fluid handling scenarios: oilfield drilling mud circulation, industrial slurry transfer, mining wastewater processing, and water supply operations. They perform reliably in temperatures ranging from -10°F to 220°F, compatible with abrasive slurries, water-based fluids, and mild chemical solutions. All components meet ANSI/HI pump standards, making them suitable for both stationary pump skids and mobile drilling rig setups.
Maintenance & Service Recommendations
- Seal & Packing Inspection: Check packing sets, O-rings, and seal cages every 500 operating hours for wear, hardening, or damage; replace immediately to stop leaks
- Bearing Lubrication: Regrease radial and thrust bearings every 1,000 hours with high-temperature lithium grease to prevent dry friction failure
- Wear Component Replacement: Swap impellers, shaft sleeves, and liners every 2,500 hours to maintain flow efficiency and prevent catastrophic wear
- Fastener Torque Check: Re-torque impeller screws and lock nuts to OEM specifications after installation and every 1,200 hours to maintain clamping integrity
- Storage Guidelines: Store seals, bearings, and precision parts in a dry, dust-free environment; coat metal components with anti-corrosion lubricant for long-term storage
We supply the following spare parts:
| 30 | LINER,SUCT GOULD 4JC-14 | X304542 |
| 31 | IMPELLER,GOULD 4JC-14 14″ | 20087 |
| 32 | SEAL CAGE TEFLON | X302732 |
| 33 | PACKING 3/8″ | 39406 |
| 34 | GLAND ASSY | 20091 |
| 35 | THRUST BEARING | 20099 |
| 36 | RADIAL BEARING RETAINER | 20102 |
| 37 | SHAFT,GOULD 4JC | 20097 |
| 38 | SLINGER,GOULD | 20104 |
| 39 | SLEEVE,SHAFT GOULD 4JC-14 | X304508 |
| 40 | LOCK NUT | 20105 |
| 41 | RADIAL BEARING | 20101 |
| 42 | OIL SEAL | 20103 |
| 43 | GASKET,GOULD HUB DISC RUBBER | 20367 |
| 44 | LOCK WASHER | 20106 |
| 45 | RING,SEAL (LARGE O’RING) | 20094 |
| 46 | O-RING,AS568-258 NTRL 90 DURO (SMALL O’RING) | XAS-258-02 |
| 47 | SCREW,IMPELLER GOULD 316SS | 20088 |
| 48 | WEAR SLEEVE GASKET | 20096 |
| 49 | Pressure gauge assy, for Recirculating pumps | TBA |
| 50 | O RING | XAS-258-01 |
| 51 | PACKING GARLOCK | X27068 |
| 52 | OIL SEAL | 33286 |
| 71 | UNIVERSAL BEARING 1810 SERIES SPICER | MDX001027 |
| 72 | UNIVERSAL BEARING 1410 SERIES SPICER | 865162 |
| 73 | DRIVELINE ASSY,SPICER 1410 X | 43493-1 |
Field Fault Repair Case Studies for Goulds 4JC-14 Pump
Case 1: Slurry Leakage from Worn Packing & Seal Cage
An oilfield drilling rig reported severe slurry leakage from the Goulds 4X6X14″ pump’s seal housing, causing fluid loss and safety hazards. Technicians replaced the worn 3/8″ packing and Teflon seal cage with OEM-spec Goulds parts, adjusted the gland assembly, and eliminated leaks entirely in 2 hours, avoiding a 3-day pump shutdown. Root cause: abrasive mud particles accelerated packing degradation.
Case 2: Excessive Vibration from Failed Radial Bearing
An industrial slurry pump station experienced loud vibration and reduced flow output, traced to a worn radial bearing. The faulty bearing and bearing retainer were replaced with genuine Goulds 4JC-14 components, shaft alignment was verified, and normal operation resumed within 90 minutes. Root cause: lack of routine lubrication led to bearing friction and failure.
Case 3: Driveline Failure from Worn Universal Bearing
A water transfer operation suffered a broken pump driveline, halting fluid flow, due to a worn Spicer 1410 series universal bearing. Replacement universal bearings and driveline assembly were installed, torque alignment was completed, and the pump restarted within 1 hour. Root cause: heavy-load operation and lack of periodic inspection caused bearing fatigue.
Frequently Asked Questions (FAQ)
| Question | Answer |
| Are these parts compatible only with the Goulds 4X6X14″ 4JC-14 pump? | Yes, every component is precision-designed and tested exclusively for the Goulds 4X6X14″ (129033-3) 4JC-14 model, ensuring perfect fitment and OEM-matched performance. |
| What materials are used for high-wear parts like impellers and liners? | High-wear components (impellers, liners) use high-chrome alloy with 60+ HRC hardness, while shafts use 4140 precision steel for maximum strength and durability. |
| Can these parts be used for both slurry and clean water pumping? | Absolutely. These parts are engineered for abrasive slurry service and also perform reliably for clean water transfer, making them versatile for multiple pumping applications. |
Procurement Guidance & Value Summary
This Goulds 4X6X14″ 4JC-14 pump parts catalog serves as a dual-purpose resource: it establishes a strict procurement standard to ensure you source only high-quality, compatible components, and provides actionable technical guidance to resolve common pump failures quickly. By selecting these OEM-grade parts, you eliminate the risks of inferior generic components—including frequent breakdowns, extended downtime, and compromised performance—while maximizing the operational lifespan and efficiency of your Goulds pump.
