Vietnam Rig Spare Parts for UH 3G-500-3000DDW, STD-500-AC-1M, E-1600

Key Functional Specifications

These rig spare parts are built to withstand extreme offshore operating conditions, with pressure ratings ranging from 150PSI to 15,000PSI and temperature tolerance spanning -30°C to 120°C to match harsh Southeast Asian marine climates. Core functionalities include precision fluid control, hydraulic power transmission, structural load bearing, pressure sealing, and mechanical actuation for critical drilling subsystems: drawworks manifold assemblies, top drive pipe handling systems, BOP sealing & actuation mechanisms, mud pump fluid ends, cementing unit valves, and high-pressure choke/kill hoses.

Structural & Engineering Features

• OEM Interchangeability: Direct replacement for TTS/Cameron, NOV/Shaffer, Weatherford, and Techzone original components, with matching part numbers and dimensional tolerances for hassle-free installation
• High-Pressure Sealing Technology: Precision-machined RTJ gaskets, lip seals, and four-lobe rings for zero-leak performance in BOP, mud manifold, and hydraulic systems
• Heavy-Duty Load Bearing: Forged spherical bearings, roller assemblies, and bogie components rated for 54-ton+ dynamic loads to support top drive and drawworks operations
• Corrosion Resistance: Hot-dip galvanized steel, stainless steel armor, and marine-grade coatings to combat saltwater corrosion and extend operational lifespan in offshore environments
• Modular Design: Pre-assembled manifold kits, seal kits, and bearing sets to reduce on-site assembly time and simplify maintenance workflows

Applicable Operating Conditions

These spare parts are optimized for Vietnam offshore drilling rigs operating in shallow to deepwater environments, with full compatibility for:

• Offshore jack-up rigs and semi-submersible rigs deploying UH 3G-500-3000DDW drawworks and STD-500-AC-1M top drives
• BOP control systems operating at 2000PSI to 10,000PSI working pressure for well control operations
• E-1600 HP mud pumps and CTCU-ADCS-SPMS600-950D cementing units for drilling fluid circulation and well cementation
• High-pressure choke/kill lines, firewater hoses, and compressed air systems for rig utility and safety operations
• HVAC systems for rig living quarters, VFD control rooms, and workshop facilities in tropical marine climates

Maintenance & Lifespan Optimization Recommendations

To maximize component longevity and prevent catastrophic failures, adhere to these industry-standard maintenance protocols:

1. Scheduled Inspection Intervals: Inspect high-wear parts (seal kits, O-rings, valve seats) every 500 drilling hours; conduct full bearing and manifold assembly checks every 1,500 hours
2. Lubrication Protocols: Use approved marine-grade lubricants for bogie bearings, spherical bearings, and hydraulic couplings; grease fittings per OEM torque specifications to avoid premature wear
3. Pressure Testing: Hydrostatically test high-pressure hoses, BOP seals, and valve assemblies post-installation to verify 1.5x working pressure integrity
4. Storage Guidelines: Store spare parts in climate-controlled, salt-free rig warehouses; protect precision components (bearings, seals) from moisture and physical damage
5. Replacement Thresholds: Replace worn seal kits, cracked hoses, and pitted valve seats at the first sign of degradation to avoid unplanned downtime and safety hazards

We supply the following spare parts:

1	00.111.032.00033	Relief valve	– 27-91VJ-6600		TTS	pce
2	00.111.032.00013	Gauge isolation valve	27-9810-1100		TTS	pce
3	00.111.032.00035	Flow control valve	– 27-9FLC-1020		TTS	pce
4	00.111.032.00043	Check valve	– 27-9CHK-0030		TTS	pce
5	00.111.032.00044	Check valve	– 27-9CHK-0150		TTS	pce
6	00.111.032.00045	Check valve	– 27-9CHK-0250		TTS	pce
7	00.111.032.00046	Circlip	28-4300-7160		TTS	pce
8	00.111.032.00047	Retaining ring	28-5100-1500		TTS	pce
9	00.111.032.00048	Retaining ring	28-5100-2000		TTS	pce
10	00.111.032.00029	O-ring	28-7422-7090		TTS	pce
11	00.111.001.01005	Duplex pump, (drawing ref 8S-J1709- 0Q2), PN:9007422	-9007422		CAMERON	pce
12	00.111.032.00049	Coupling insert	– 27-13KT-6240		TTS	pce
13	00.111.032.00152*	Coupling hub	– 27-124R-2570		CAMERON	pce
14	00.111.032.00049	Coupling insert	– 27-13KT-6240		TTS	pce
15	00.111.001.01000	Brake pump (drawing ref 8S-J1232- 0Q2)9007398	-9007398		Cameron	pce
16	00.111.032.00051	Coupling insert	– 27-124R-2560		TTS	pce
17	00.111.032.00052	Coupling hub	– 27-13KT-2680		TTS	pce
18	00.111.001.01019	Seal kit, PN:9012949	-9012949		Cameron	pce
19	00.111.001.01016	Spring Pack BSFK 523, PN:9012946	-9012946		TTS/Cameron	pce
20	00.144.004.01381	G-20 Roller turnback assembly, less base casting, PN:431204	-431204		CAMERON	pce
21	00.111.036.00174*	Hang-off wire ropes (for the Travelling Block + Top drive)	–	2-1/4″ Dia., SWL=54 ton, 6 x 37 IWRC – EIPS, two ends socket with steel coat, Length 36m, c/w certificate / 2- 1/4″		pce
22	00.111.036.00175*	Spherical plain bearing	– 7K-1116048	CAMERON		pce
23	00.111.036.00054	S-pipe (7500 psi)	-20001679		TTS	pce
24	00.111.036.00055	O-ring 72.39×5.33 Viton 70sh	-1115723		TTS	pce
25	00.111.036.00056	S-pipe/wear ring	-1012038		TTS	pce
26	00.111.036.00057	O-ring 91.44×5.33 Viton 70sh	-1115724		TTS	pce
27	00.111.036.00144	Swivel/ Torque rod	-1022424		CAMERON	pce
28	00.149.004.00724	Swivel/Spring Package Asembly (DWG:1022405), PN:1022425	-1022425		CAMERON	pce
29	00.111.036.00145	Disc spring (DWG: 1022425)	-1116350		CAMERON	pce
30	00.149.004.00492	Hydraulic motor OMV 800, PN:9008385	-9008385		CAMERON	pce
31	00.111.036.00066	Plain bearing	-1023615		TTS	pce
32	00.111.036.00067	Flanged bearing	-1023616		Cameron	pce
33	00.111.036.00068	Closing ring	-1023617		TTS	pce
34	00.111.036.00069	Bearing	-1115893		TTS	pce
35	00.111.036.00070	Bearing	-1115894		TTS	pce
36	00.144.004.01246	IBOP Sleeve, PN:1116322	-1116322		CAMERON	pce
37	00.111.036.00176*	Slide block	– 7K-1032530		CAMERON	pce
38	00.111.036.00177*	Cylinder Case	– 7K-1026762		CAMERON	pce
39	00.111.036.00071	Spherical bearing	-1115895		Cameron	pce
40	00.111.036.00072	Bearing	-1115896		TTS	pce
41	00.111.036.00073	Grease nipple M10x1, straight	-1137353		TTS	pce
42	00.149.004.00290	Hydraulic cylinder 160/80×390, PN:9006472	-9006472		CAMERON	pce
43	00.111.036.00178*	Telescope cyl. Bracket	– 7K-10018678		CAMERON	pce
44	00.111.036.00179*	Telescope cyl. Pin	– 7K-10018689		CAMERON	pce
45	00.111.036.00084	Seal kit for Hyd. Cylinder 50/25×1096	-9010776		TTS	Kit
46	00.111.036.00155	Hydraulic assembly	– 7K-10019103		CAMERON	pce
47	00.111.036.00049	Weight comp. chain assembly	-20001000		TTS	pce
48	00.111.036.00180*	Hydraulic Cylinder W/Sensor	– 7K-9012084		CAMERON	pce
49	00.111.036.00085	Side roller	-20000832		TTS	pce
50	00.111.036.00086	Parking rod	-20001590		TTS	pce
51	00.111.036.00089	Buffer	-1116222		TTS	pce
52	00.111.036.00090	Grease nipple IS 4009 A – 1 /8 BSP, SS	-20001178		TTS	pce
53	00.111.036.00092	Bearing outer spacer	-1029547		TTS	pce
54	00.111.036.00093	Wheel spacer	-1029549		TTS	pce
55	00.111.036.00094	Inner bearing spacer	-1029689		TTS	pce
56	00.111.036.00095	Bogie cover	-1029709		TTS	pce
57	00.111.036.00097	DIN 71412 – AM10 x 1	-1100204		TTS	pce
58	00.111.036.00098	Bearing, SPH. Roller	-1116078		TTS	pce
59	00.111.036.00099	Simmer ring	-1116079		TTS	pce
60	00.111.036.00102	Flange bushing Ø90/110/120 x 50	-1116154		TTS	pce
61	00.111.036.00103	Hex head bolt’ISO 4014 – M30 x 460, 8.8 H.D.G.	-20001920		TTS	pce
62	00.111.036.00181*	Bogie Main bold	-20003582		CAMERON	pce
63	00.111.036.00182*	Bogie Tension nut	-20003585		CAMERON	pce
64	00.111.036.00108	Self locking counter nut-DIN7967 – M30, HDG	-1137211		TTS	pce
65	00.111.036.00183*	Buffer Set ( 14 Pce/Set)	-700002986		CAMERON	set
66	00.111.036.00184*	Bolting Set( 14 Pce/Set)	-700007295		CAMERON	set
67	00.111.036.00185*	Valve Block PH2 For Topdrive	– 7K-9006854		CAMERON	set
68	00.111.036.00186*	Oil Pump	– 7K-9008010		CAMERON	set
69	00.111.098.00018	Parker Hydraulic Pump	-PV140R1K1T1NMFC4545		PARKER	pce
70	00.111.098.00002	Half Coupling flexible drive	114724-1		CAMERON	pce
71	00.111.098.00003	Half Coupling 1-1/4 – 14 flexible drive	114725-1		CAMERON	pce
72	00.111.098.00004	Insert flexible drive –	114726-1		CAMERON	pce
73	00.111.098.00013	Filter element	-9004544		Cameron	pce
74	00.111.098.00014	Drain filter	-9013422		Cameron	pce
75	00.111.098.00015	Pressure filter	-9013423		Cameron	pce
76	00.111.098.00016	Return filter	-9013424		Cameron	pce
77	00.111.098.00017	Filter element	-9013425		Cameron	pce
78	00.111.098.00006	Filter element suction	114738-1		Cameron	pce
79	00.111.098.00005	Filter element return	108741-1		Cameron	pce
80	00.111.013.02262	Seal Kit (Replacement part kit for Shaffer Bolted – Cover – Spherical 21 1/4″ x 2000 psi)	-155067		NOV	Kit
81	00.111.016.00748	Stud	-150832		Shaffer (NOV)	set
82	00.111.016.00749	Nut	-20107		NOV	set
83	00.111.013.02267	Hammer wrench size 2-9/16″, PN:050822	-50822		Shaffer (NOV)	pce
84	00.086.004.01692	Seal element (nitrile) –	150799+20		Shaffer ; USA	pce
85	00.111.013.01394	RSSA, NEW STYL	-133368		NOV	set
86	00.111.016.00757	Packing for ram shaft	-116234		NOV	pce
87	00.111.013.02268	Wiper ring, PN:116236	-116236		NOV	pce
88	00.111.013.02269	Retainer ring, PN:141243	-141243		NOV	pce
89	00.111.013.02270	Deep polypak seak, PN:031263	-31263		NOV	pce
90	00.111.013.02271	Wiper ring holder, PN:116237	-116237		Shaffer (NOV)	pce
91	00.111.016.00810	Wear ring, mandrel –	-119262		NOV	pce
92	00.111.016.00807	Seal, PN:030778	-30778		NOV	pce
93	00.111.016.00808	Seal (outer)	-136334		NOV	pce
94	00.111.013.02272	Seal (inner), PN:031376	-31376		NOV	pce
95	00.111.013.02273	SPG, PSLK (Spring)	-134674		NOV	pce
96	00.111.082.00015	Door seal	-30176		NOV	pce
97	00.111.013.01754	O-ring, Cylinder	-30030		NOV	pce
98	00.111.013.01755	O-ring, cylinder head	-30100		NOV	pce
99	00.111.013.01757	O-ring, cylinder manifold	-30061		NOV	pce
100	00.111.016.00760	Back up ring, cylinder head, PN:030790	-30790		NOV	pce
101	00.111.016.00758	O-ring for hinge bracket	-30064		NOV/SHAFFER	pce
102	00.111.013.02074	O-ring Bushing Inner	-20019696		Shaffer (NOV)	pce
103	00.111.016.00751	O-ring cylinder	-30007	SHAFFER 21-1/4″-2000 psi LWS RAM BOP; ;	NOV	pce
104	00.111.016.00753	O-ring cylinder manifold port	-30009	SHAFFER 21-1/4″-2000 psi LWS RAM BOP; ;	NOV	pce
105	00.111.016.00754	Stud cylinder, PN:130756	-130756		NOV	pce
106	00.111.016.00755	Esna nut	-20105		NOV	pce
107	00.111.013.01404	CHECK VLV ASSY, SEC SEAL	-130368		NOV	pce
108	00.111.016.00759	Sealant secondary seal, PN:050000	-50000		NOV	pce
109	00.111.082.00021	Rubber, sub assembly (for 5-1/2″ OD pipe)	-137825		NOV Shaffer	pce
110	00.111.013.02258	GASKET, RTJ, BX 160, 5M, PN:702003-16-02	702003-16-2		CAMERON	pce
111	00.111.013.02275	Complete replacement kit (seal, bearing, & scrapers ‘D’ BOP 13-5/8″ 3-5M). One standard annular kit consist 20 items below: , PN:049742- 06	49742-6		CAMERON	Kit
112	00.111.083.00082	Bonnet Seal	644573-3-0-1	Bonnet Seal For U Bopб Material : Camlast 85 Shore ‘A’ Per Api 16A 4Th Can Be Used For 13-5/8 5K Pipe & Large Bore Shear: Pr2 And Temp Class : Bdf 13-5/8 10K Pipe & Large Bore Shear: Pr2 And Temp Class : Bdf 13- 5/8 10K Fxt: Pr2 And Temp Class : Edf	CAMERON	pce
113	00.111.013.01657	O-ring, bonnet bolt retainer	702645-23-91	Превентор BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
114	00.111.083.00083	Ring Gasket, API Type BX-154 Low C STL Plated/ API 6A PSL 4 API  Monogram	702003-15-42	Ring Gasket, Api Type Bx-154 Low C Stl Plated/ Api 6A Psl 4 Api Monogram	CAMERON	pce
115	00.111.083.00062	Ring Gasket, Api Type Bx-159 Low C Stl Plated /Api 6A Psl 4 API Monogram	702003-15-92		CAMERON	pce
116	00.111.083.00033	Ring, Plastic packing	12469-24		CAMERON	pce
117	00.111.083.00034	Ring, Plastic energizing	18586-1		CAMERON	pce
118	00.111.083.00063	Seal, Lip – 5.505″ Od X 4.008″ Id X0.938″ Lg , Lip – 5,505″ “Нд X 4,008”	645077-36-0-1	Seal, Lip – 5.505″ Od X 4.008″ Id X0.938″ Lg, 13-5/8″ 3M-15M#, 20-3/4″ 3M#, 21-1/4″ 2M# And 26-3/4 3M# Type ‘U’ Bop, Per Api 16A, Temp Class “Bf”	CAMERON	pce
119	00.111.083.00006	GASKET, RING – 5.469″ OD	21792-26		CAMERON	pce
120	00.111.083.00064	O Ring, Size As-568-649 12.725″ Id X .275 W 90D /Ms-1078 Nitrile Pkg And Qual /Ciw 702645	702645-45-48		CAMERON	pce
121	00.111.013.01651	O-ring, operating piston rod to int flg	18492-90	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
122	00.111.013.01249	Lip seal, operating piston	-710538	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
123	00.111.013.01250	Seal, Lip (old PN 011741-34 )(Cameron U Blowout preventer 13-5/8″ x 10000 Psi WP	212741-34-0-1	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
124	00.111.083.00048	O-Ring	702645-33-71		Cameron	pce
125	00.111.013.01652	O-ring, ram change piston to body	702645-32-81	Превентор BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
126	00.111.083.00076	Four Lobes Ring	2245543-3	Four Lobes Ring, Jf4 N° 36Od 73.53 X Id 62.87 X Wt 5.33Material: Nbr (Nitrile) 80 Shore ‘A’ Duro Temp. Class – 30°C To 100°C (120°C Rush) Allow 1500Psi, Wp 3000 Psi Max By Rush Jf4 № 36, Нд 73,53 X Вн 62,87 X Вес 5,33  Nbr 80 Shore ‘A’ Duro Temp.  -30°C ÷ 100°C (120°C ) 1500Psi, Wp 3000Psi , 2245543-03	CAMERON	pce
127	00.111.013.01654	O-ring, ram change cylinder to int flg	702645-34-61	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
128	00.111.013.01655	O-ring, ram change cylinder to bonnet	702645-42-51	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
129	00.111.083.00066	Four Lobes Ring, Jf4 N° 41 Od 89.40 X Id 78.74 X Wt 5.33	2245543-2	Four Lobes Ring, Jf4 N° 41Od 89.40 X Id 78.74 X Wt 5.33Material: Nbr (Nitrile) 80 Shore ‘A’ Duro Temp. Class – 30°C To 100°C (120°C Rush)Allow 1500Psi, Wp 3000 Psi Max By Rush.P/N: 2245543-02	CAMERON	pce
130	00.111.083.00010	RETAINER, LIP SEAL	689523-1		CAMERON	pce
131	00.111.083.00053	Wear Ring	49223-1		Cameron	pce
132	00.111.083.00069	Sub-Assy Piston, Ram Change Open 11″ 15K, 13-5/8″ 10K “U” Bop With Wear Ring And Qpq Treatment (NonMonogramable)	31239-3		CAMERON	pce
133	00.111.083.00070	Sub-Assy Piston, Ram Change ‘Close’ 11″ 15K, 13-5/8″ 10K “U” Bop With Wear Ring And Qpq Treatment (NonMonogramable)	31238-3		CAMERON	pce
134	00.111.083.00071	Cylinder Ram Change “U” Bop 13.5./8″ 3K/5K/10K & 11″ 15K With Qpq Treatment	30273-1-70		CAMERON	pce
135	00.111.083.00048	O-Ring	702645-33-71		Cameron	pce
136	00.111.013.01250	Seal, Lip (old PN 011741-34 )(Cameron U Blowout preventer 13-5/8″ x 10000 Psi WP	212741-34-0-1	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
137	00.111.083.00050	O-Ring	702645-38-12		Cameron	pce
138	00.111.013.01641	Seal Ring, 3.00 Id X 3.75 Od X 375 Polypak Туре В	710418	BOPCAMERON 13-5/8″ 10000 psi; ;	Cameron	pce
139	00.111.013.01642	Wear Ring, Tandem Shear Cylinder, 11″ 15m#, 13 5/8″ 10m#, 20 3/4″ 3m# And 21 1/4″ 2m#”U” Bop	645215-1	BOPCAMERON 13-5/8″ 10000 psi; ;	Cameron	pce
140	00.111.083.00053	Wear Ring	49223-1		Cameron	pce
141	00.111.013.01249	Lip seal, operating piston	710538	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
142	00.111.083.00073	Tailrod Tandem Shear Booster, Composite	2010880-7	Tailrod Tandem Shear Booster, CompositeStyle 11 15K & 13-5/8 10K U Bop With Tungsten Carbide Overlay Short Version  Used W/O Spacer Shear Material : Aisi 4140 – 80K	CAMERON	pce
143	00.111.083.00074	Piston, Tandem Shear Booster	-645180	Piston, Tandem Shear Booster, For U Bonnet :- 11-15K – 13-5/8 3K To 10K – 20-3/4 3K – 21-1/4 2K For Um Bonnet : – 11 15K – 13-5/8 10KMaterial: 4130 – 75K	CAMERON	pce
144	00.111.083.00082	Bonnet Seal	644573-3-0-1	Bonnet Seal For U Bopб Material : Camlast 85 Shore ‘A’ Per Api 16A 4Th Can Be Used For 13-5/8 5K Pipe & Large Bore Shear: Pr2 And Temp Class : Bdf 13-5/8 10K Pipe & Large Bore Shear: Pr2 And Temp Class : Bdf 13- 5/8 10K Fxt: Pr2 And Temp Class : Edf	CAMERON	pce
145	00.111.013.01657	O-ring, bonnet bolt retainer	702645-23-91	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
146	00.111.083.00083	Ring Gasket, API Type BX-154 Low C STL Plated/ API 6A PSL 4 API Monogram	702003-15-42	Ring Gasket, Api Type Bx-154 Low C Stl Plated/ Api 6A Psl 4 Api Monogram	CAMERON	pce
147	00.111.083.00062	Ring Gasket, Api Type Bx-159 Low C Stl Plated /Api 6A Psl 4 Api Monogram	702003-15-92		CAMERON	pce
148	00.111.083.00033	Ring, Plastic packing	12469-24		CAMERON	pce
149	00.111.083.00034	Ring, Plastic energizing	18586-1		CAMERON	pce
150	00.111.083.00063	Seal, Lip – 5.505″ Od X 4.008″ Id X0.938″ Lg	645077-36-0-1	Seal, Lip – 5.505″ Od X 4.008″ Id X0.938″ Lg, 13-5/8″ 3M-15M#, 20-3/4″ 3M#, 21-1/4″ 2M# And 26-3/4 3M# Type ‘U’ Bop, Per Api 16A, Temp Class “Bf”	CAMERON	pce
151	00.111.083.00006	GASKET, RING – 5.469″ OD	21792-26		CAMERON	pce
152	00.111.083.00064	O Ring, Size As-568-649 12.725″ Id X .275 W 90D /Ms-1078 Nitrile Pkg And Qual /Ciw 702645 –	702645-45-48		CAMERON	pce
153	00.111.013.01651	O-ring, operating piston rod to int flg	18492-90	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
154	00.111.013.01249	Lip seal, operating piston	710538	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
155	00.111.013.01250	Seal, Lip (old PN 011741-34 )(Cameron U Blowout preventer 13-5/8″ x 10000 Psi WP	212741-34-0-1	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
156	00.111.083.00048	O-Ring	702645-33-71		Cameron	pce
157	00.111.013.01652	O-ring, ram change piston to body	702645-32-81	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
158	00.111.083.00076	Four Lobes Ring	2245543-3	Four Lobes Ring, Jf4 N° 36Od 73.53 X Id 62.87 X Wt 5.33Material: Nbr (Nitrile) 80 Shore ‘A’ Duro Temp. Class – 30°C To 100°C (120°C Rush)Allow 1500Psi, Wp 3000 Psi Max By Rush	CAMERON	pce
159	00.111.013.01654	O-ring, ram change cylinder to int flg	702645-34-61	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
160	00.111.013.01655	O-ring, ram change cylinder to bonnet	702645-42-51	BOPCAMERON 13-5/8″ 10000 psi; ;	CAMERON	pce
161	00.111.083.00066	Four Lobes Ring, Jf4 N° 41 Od 89.40 X Id 78.74 X Wt 5.33	2245543-2	Four Lobes Ring, Jf4 N° 41Od 89.40 X Id 78.74 X Wt 5.33Material: Nbr (Nitrile) 80 Shore ‘A’ Duro Temp. Class – 30°C To 100°C (120°C Rush)Allow 1500Psi, Wp 3000 Psi Max By Rush.P/N: 2245543-02	CAMERON	pce
162	00.111.083.00010	RETAINER, LIP SEAL	689523-1		CAMERON	pce
163	00.111.083.00053	Wear Ring	49223-1		Cameron	pce
164	00.111.083.00069	Sub-Assy Piston, Ram Change Open 11″ 15K, 13-5/8″ 10K “U” Bop With Wear Ring And Qpq Treatment (NonMonogramable)	31239-3		CAMERON	pce
165	00.111.083.00070	Sub-Assy Piston, Ram Change ‘Close’ 11″ 15K, 13-5/8″ 10K “U” Bop With Wear Ring And Qpq Treatment (NonMonogramable)	31238-3		CAMERON	pce
166	00.111.080.00001	Seal, Flowline, 48.750 OD x 45.130 ID x 5.00 LG, DIVERTER ASSEMBLY	278814-6		Cameron	pce
167	00.111.013.01334	Packoff Seal	– 3A-969-486-715	Cameron Diverter System; ;	CAMERON	pce
168	00.083.070.00038*	Spur Rack With Holder	-73636		JD NEURAUS	pce
169	00.083.046.00363	Control valve air EH	-8349		JD NEURAUS	pce
170	00.083.046.00364	Gear box motor LZ 20-25	-14416		JD NEURAUS	pce
171	00.083.070.00039*	Gear Box Motor LZ20-25Ii	-14417		JD NEURAUS	pce
172	00.083.070.00040*	Bolt 106.8 FS	-98549		JD NEURAUS	pce
173	00.149.004.00368	Ball, PN:00073223	-73223		JD NEURAUS	pce
174	00.049.001.06125	Vòng bi SKF NJ 215E	–		SKF	pce
175	00.049.001.06990*	Vòng Bi SKF 6010-2Z/C3	– 6010-2Z/C3		JD NEURAUS	pce
176	00.049.001.06210	Bearing 6210 ZZC3	–		SKF	pce
177	00.083.070.00004	Pinion Shaft	-73274		JD NEURAUS	pce
178	00.144.011.00099	Belt, banded, 8vk2360, 8 grv –	-1722930	Mud Pumps Weatherford E-1600; E-1600;	Weatherford	pce
179	00.081.083.00077*	Manifold, Discharge	-1813666		WEATHERFORD	pce
180	00.081.083.00026	Gasket, Discharge Manifold –	-1251010		WEATHERFORD	pce
181	00.081.083.00029	Seal, Module	-1249273		WEATHERFORD	pce
182	00.081.083.00025	Bolt, Suction Manifold Mounting	-1257196		WEATHERFORD	pce
183	00.081.083.00078*	Manifold, Suction	-1380831		WEATHERFORD	pce
184	00.081.083.00024	Gasket, Suction Manifold	-767100		WEATHERFORD	pce
185	00.081.083.00030	Stud & Nut, Tapered 1-1/2 Taper Lock –	-1317854		WEATHERFORD	pce
186	00.081.083.00079*	Seal, Hp Valve Cover Plug, Polyurethane	-1317803		WEATHERFORD	pce
187	00.081.083.00080*	Plug, Valve Cover SW-HPQC (Complete With Valve Guide; Screws; And Bushing)	-1317953		WEATHERFORD	pce
188	00.081.083.00033	Guide, Valve (complete with bushing #1317889)	-1317930		WEATHERFORD	pce
189	00.081.083.00081*	Flange, Valve Cover	-1317908		WEATHERFORD	pce
190	00.081.083.00082*	Gland, Valve Cover Screw	-1766708		WEATHERFORD	pce
191	00.081.083.00030	Stud & Nut, Tapered 1-1/2 Taper Lock –	-1317854		WEATHERFORD	pce
192	00.081.083.00007	Nut, Liner Retainer	-1317086		WEATHERFORD	pce
193	00.081.083.00041	Flange, Liner Retainer	-1317070		WEATHERFORD	pce
194	00.081.083.00040	3/4″ Socket Head Capscrew	-1383136		WEATHERFORD	pce
195	00.081.083.00042	Wear plate, Liner, Carbon Steel fits Emsco FC-1600 Swfe	-1318087		WEATHERFORD	pce
196	00.081.083.00045	Wear plate O-ring	-767160		WEATHERFORD	pce
197	00.081.083.00044	Wear Plate, CS	-1318085		WEATHERFORD	pce
198	00.081.083.00046	Rod, crosshead extension	-1230968		Weatherford	pce
199	00.081.083.00047	5/8″ x 2-1/2″ FH Capscrew	-1241069		WEATHERFORD	pce
200	00.081.083.00048	Packing, Extension Rod	-1244650		WEATHERFORD	pce
201	00.144.011.00102	Disc, Baffle	-1231034	Mud Pumps Weatherford E-1600; E-1600;	Weatherford	pce
202	00.081.083.00049	3″ reset relief Vavle 1500-5000psi, Standard Service, w/3″ Fig 1502 Fermale Inlet x Male Outlet	-130367		OTECO	pce
203	00.081.083.00022	Major repair kit, standard	-143216		OTECO	pce
204	00.144.011.00112	Pump, liner wash 1.000 inlet x 1.500 outlet	-1248671	Mud Pumps Weatherford E-1600; E-1600;	Weatherford	pce
205	00.144.011.00113	Pump, lube, gear, 1-1/2 hp, atex	-1730778	Mud Pumps Weatherford E-1600; E-1600;	Weatherford	pce
206	00.081.083.00083*	Plate Heat Exchanger, М6-MFG (PED)	– M6-MFG(PED)	Weatherford M6-16	WEATHERFORD	set
207	00.081.083.00084*	Plate Heat Exchanger, M3-FG (ASME)	– M3-FG(ASME)		WEATHERFORD	set
208	00.050.001.07073*	Standard Metric Socket Set	-1742507	Include :- Number of pieces : 19 ;- Drive size 3/4″;- Socket type 12pt, standard ;- Socket include : 24, 25, 26, 27 , 28, 29, 30, 31, 32, 35,36, 38, 41, 42, 46 .- Accessories : Pearl Head Ratchet, 8″ and 16″Extensions, 20 Hinge Handle, Metal Case .	WEATHERFORD	set
209	00.050.001.07074*	Hydraulic Pump & 4 Hydraulic Tool For Valve Housings (Hp1700, Hydraulic Valve Seat Pull)	-1241141		WEATHERFORD	set
210	00.081.085.00065	Valve seat assy with o-ring	P105617		TECHZONE	pce
211	00.081.085.00064	Valve assembly complete	P105600		TECHZONE	pce
212	00.081.085.00013	Spring / Valve / N / 4.50 TWS / 77 LB / IN	– 4P100198		TECHZONE	pce
213	00.149.004.00532	Trans Shifter, PN:TZP-206-E5-13	– TZP-206-E5-13		TECHZONE	pce
214	00.149.004.00533	Engine Throttle- PWM-500Hz-Single, PN:TZP-206-E5-12	– TZP-206-E5-12		TECHZONE	pce
215	00.081.085.00061	Pneumatic actuator, 2″ to 6″	– TZP-206-F6-03a		TECHZONE	pce
216	00.081.085.00062	Hydraulic Joy stick, 4 stations-serva	– TZP-206-E2-3		TECHZONE	pce
217	00.081.085.00063	Hydraulic Joy stick, 2 stations, 500 psi preset- tom allen	– TZP-206-E2-4		TECHZONE	pce
218	00.081.085.00076*	Hydraulic Valve Actuator For Water, 1.500 Psi Max, 0 – 90 Deg	– TZP-206-F4-09	Spare part include : 02 set Seal Kit for Hydraulic cylinder	TECHZONE	pce
219	00.081.085.00077*	Flow Control Valve	– TZP-206-F4-05		TECHZONE	pce
220	00.081.085.00078*	2″ Relief Valve, 0 – 15000 Psi Adjustable	– TZP-206-D3-12		TECHZONE	pce
221	00.149.013.00001	Choke and Kill hoses size 3″, c/w 3 1/16″ x 10000 PSI	–	Hoses size 3″, c/w 3 1/16″ x 10000 PSI, BX-154 Flanges two ends, 80ft Long, an external stainless steel armor shield spiraled over the hose cover, c/w safety clamps, 10000psi WP, 15000psi TP complete		pce
222	00.039.002.00052	Gates Black Gold Rotary Drilling Hose grade E, 5” ID, 5000psi Wp,38ft LG, Both ends wing union 6″ FIG 1004 BW Female Sub (from Cantilever to drill floor)	–			pce
223	00.039.002.00051	Gates Black Gold Rotary Drilling Hose grade E, 3 1/2” ID, 5000psi Wp, 25,5m LG, Stainless steel armor Spiraled over the hose cover,Both ends wing union 6″ FIG 1002 BW Female Sub	–	Gates Black Gold Rotary Drilling Hose grade E, 3 1/2” ID, 5000psi Wp, 25,5m LG, Stainless steel armor Spiraled over the hose cover,Both ends wing union 6″ FIG 1002 BW Female Sub, with certificates		pce
224	00.039.004.00098*	Cement Hose, Size 2″ Id X 100Ft. Lg, 10.000 Psi Wp	–	– 2″ NPT Male Threaded on both ends.- With Lifting collar and Chain on both ends- ABS Type Approval- API 7K Monogrammed FSL0- Design -25degC to +100degC		pce
225	00.039.004.00099*	Cement Hose, Size 2″ Id X 30Ft. Lg, 10.000 Psi Wp	–	– 2″ NPT Male Threaded on both ends.- With Lifting collar and Chain on both ends- ABS Type Approval- API 7K Monogrammed FSL0- Design -25degC to +100degC		pce
226	00.040.001.10198	Fire water Hose Assy, Both ends wing union Female 4″ FIG 200 Sub BWE, Hose construction with Black NBR lining…..,PN:4” ID x 170psi WP x 45Ft. LG	– 4” ID x 170psiWP x 45Ft. LG	4” ID x 170psi WP x 45Ft. LG, Fire water Hose Assy, Both ends wing union Female 4″ FIG 200 Sub BWE, Hose construction with Black NBR lining, Steel Cord layers Reinforcement , Red smooth CR Cover, ABS approved at 6000C for 30 minutes fire rating		pce
227	00.039.011.00179*	6″ Id X 185Psi Wp X 40 Ft. Lg Deluge Hose Assy	– 6” ID x 185PSIWP x 40 Ft. LG	– Both ends wing union Female 6” FIG 200 Sub BW,SCH40 Coupling, Hose construction with Black NBRlining, Steel Cord layers Reinforcement , Red smoothCR Cover, ABS approved at 600oC for 30 minutes firerating, With Lifting collar and Chain on both ends- ABS Type Approval (Fire rated Hose)		pce
228	00.039.011.00180*	6″ Id X 150 Psi Wp X 40Ft. Lg Raw Water Hose Assy	– 6”ID x 150PSIWP x 40Ft.LG	Both ends wing union Female 6” FIG 200 Sub BWE,SCH40 Coupling, Hose construction with Black NBRlining, High tensile Textile Cords Plus Antistatic wireReinforcement, Black CR/BR Blend, Abrasion zone and hydrocarbon Resistant Cover . With Lifting collar and Chain on both ends.		pce
229	00.039.006.00481*	4″ Id X 150Psi Wp X 40Ft. Lg, Compresed Air Hose	–	– Both ends wing union Female 4” FIG 200 Female Sub BW, Hose construction with Black Neoprele lining, Braid High tensile Steel wire Reinforcement, Type D3 (Natural ruber) Cover. With Lifting collar and Chain on both ends.		pce
230	00.039.006.00482*	4″ Id X 150Psi Wp X 40Ft. Lg, Low Pressure Mud Hose, Mud Resistant Type	–	– Both ends wing union Female 4” FIG 200 Female SubBWE, , With Lifting collar and Chain on both ends.		pce
231	00.039.011.00181*	1-1/2″ ID x 150psi WP x 40Ft LG, Potable Water Hose Assy	– 1-1/2” ID x150psi WP x 40FtLG	– One end wing union FIG 200 Female sub threaded end, other end wing union FIG 200 male sub with nut threaded end & With Lifting collar and Chain on both ends .		pce
232	00.040.001.10206	Raw Water Hose, Both ends wing union 6” FIG 200 Female sub BWE, PN:6” ID x 150 psi Wp x 38Ft. LG	– 6” ID x 150 psiWp x 38Ft. LG			pce
233	00.040.001.10207	Fire Water Hose, Both ends wing union 3” FIG 200 Female sub BWE, PN:3” ID x170 psi Wp x 38Ft. LG	– 3” ID x170 psiWp x 38Ft. LG			pce
234	00.040.001.10208	Deluge Water Hose, Both ends wing union 6” FIG 200 Female sub BWE, PN:6” ID x185 psi Wp x 38ft. LG	– 6” ID x185 psiWp x 38ft. LG			pce
235	00.040.001.10209	Compressed Air Hose, Both ends wing union 4” FIG 200 Female sub BWE, PN:4” ID x 150 psi Wp x 38Ft. LG	– 4” ID x 150 psiWp x 38Ft. LG			pce
236	00.040.001.10211	Drill Water Hose, Both ends wing union 3” FIG 200 Female sub BWE, PN:2” ID x 150 psi Wp x 38Ft. LG	– 2” ID x 150 psiWp x 38Ft. LG			pce
237	00.040.001.10212	Low pressure mud Hose, mud resistant type, Both ends wing union Female 4” FIG 200 Female Sub BWE , PN:4” ID x 170psi WP x 38Ft. LG	– 4” ID x 170psiWP x 38Ft. LG			pce
238	00.039.011.00181*	1-1/2″ ID x 150psi WP x 40Ft LG, Potable Water Hose Assy	– 1-1/2” ID x150psi WP x 40FtLG	– One end wing union FIG 200 Female sub threaded end, other end wing union FIG 200 male sub with nut threaded end & With Lifting collar and Chain on both ends .		pce
239	00.039.006.00483*	8″ Id X 150Psi Wp X 25M. Lg. Flexible Hose	– 8” ID x 150psiWp x 25m. LG.	– Non- wire reinforced type, one end 8” Flange class 150,other end plain pipe end., With Lifting collar and Chain-Accept max 3 length joint together		pce
240	00.039.006.00484*	10″ Id X 150Psi Wp X 25M. Lg. Flexible Hose	– 10” ID x 150psiWp x 25m. LG.	– Non- wire reinforced type, one end 10” Flange class150, other end plain pipe end., With Lifting collar andChain- Accept max 3 length joint together		pce
241	00.039.003.00196*	Petroleum Transfer Hose 3″ Id X 300 Psi X 245Ft LG	–	– Both ends Mulconroy Ferrule swaged on MulconroySolid male API Nipple thread size: 3″ NPT , WithLifting collar and Chain on both ends.- Accept max 2 length joint together		pce
242	00.039.011.00182*	Flexible Hose 3″ Id X 300 Psi Wpx 245 Ft Lg, 533Mm Minimum Bend Radius	–	– Both Ends Swaged On 3” Ferrule, 3” NPT Male HoseInsert Suitable FOR DRINKING WATER SystemPurpose., With Lifting collar and Chain on both ends- Accept max 2 length joint together		pce
243	00.039.011.00183*	Flexible Hose 4″ Id X 180 Psi Wp X 245Ft Lg, 457Mm Mimimum Bend Radius	–	– Both Ends Swaged On 4” Ferrule, 4” NPT Male HoseInsert FOR DRILL WATER System Purpose., WithLifting collar and Chain on both ends- Accept max 2 length joint together		pce
244	00.039.004.00100*	Cement, Barite Transfer Hose 5″ X75M, Wp 150 Psi	–	– Both ends 5″ Flange class 150., With Lifting collar andChain on both ends- Accept max 2 length joint together		pce
245	00.040.001.10223	Hose with optional an external stainless steel armor shield, Spiraled over the hose cover, Both ends 1- 5/16″ -12 UNF Swivel Female JIC , PN:1″ ID x 5000 PSI Wp x 60FT. LG	–		Gates or equivalent	pce
246	00.040.001.10224	Hose with optional an external stainless steel armor shield, Spiraled over the hose cover, Both ends 3/4″ – 16 UNF Swivel Female JIC ,PN:1/2″ ID x 5000 PSI Wp x 60FT. LG	–		Gates or equivalent	pce
247	00.040.001.10225	Hose with optional an external stainless steel armor shield, Spiraled over the hose cover, Both ends 1-7/8″ -12 UNF Swivel Female JIC, PN:1- 1/2 ID x 5000 PSI Wp x 60FT. LG	–		Gates or equivalent	pce
248	00.040.001.06736	GATE VALVE, SIZE : 3” ,5000 PSI WP, TEMPRATURE CLASS P TO U, EE 0.5, PN:A25593-3	A25420-3		NOV-ANSON	pce
249	00.040.001.10488	Gate	-25021		NOV-ANSON	pce
250	00.040.001.10489	Seat	-25020		NOV-ANSON	pce
251	00.040.001.10490	Stem Seal	-25615		NOV-ANSON	pce
252	00.040.001.10491	Bonnet Seal	-50506		NOV-ANSON	pce
253	00.040.001.06741	Stem bush, PN:25027	-25027		NOV-ANSON	pce
254	00.040.001.06742	Oring, PN:25034	-25034		NOV-ANSON	pce
255	00.040.001.06743	Retainer, PN:25025	-25025		NOV-ANSON	pce
256	00.040.001.10492	Stem Screw Seal	-24854		NOV-ANSON	pce
257	00.040.001.06745	Handle, PN:25031	-25031		NOV-ANSON	pce
258	00.040.001.06746	Split pin, PN:25033	-25033		NOV-ANSON	pce
259	00.040.001.11422	NOV-ANSON Mud gate valve, weld end connections. Size: 5″x4″x5000 psi. Gate material 316SS, seat material BUNA-N, body coasting.	A25415		ANSON/NOV	pce
260	00.040.001.10485	Gate	-24864		NOV-ANSON	pce
261	00.040.001.10487	Seat	-24866		NOV-ANSON	pce
262	00.040.001.13553*	Bonnet	-24882		ANSON/NOV	pce
263	00.040.001.13554*	Mud Gate Valve, Size: 5″ X 7500Psi	A56818	29″ Face to Face, 5-1/18″ 10K BX169 ST.ST.INLAY FAB FLG ENDS, TEMPRATURE CLASS P TO U	ANSON/NOV	pce
264	00.040.001.06708	Gate, PN:34064	-34064		Nov	pce
265	00.040.001.06714	Boot, PN:37619	-37619		NOV	pce
266	00.040.001.06715	Seat support ring, PN:34066	-34066		NOV-ANSON	pce
267	00.040.001.06717	Seat Seal, PN:28258	-28258		NOV-ANSON	pce
268	00.040.001.06723	Stem seal, PN:68732	-68732		NOV-ANSON	pce
269	00.149.016.00015	SPM-PLUG VALVES for sour gas service. Size 2″ Model SP150/LT, 15,000psi CWP , Weco fig.1502 union ends (Connections: Fig 1502 Female Sub End x Fig 1502 Male Sub end with Nut)	– 1A14487		WEIR-SPM	pce
270	00.149.016.00016	Repair Kit for Plug valve 2”, 15000 psi, FIG 1502, Standard service-SPM	– 4L11982		WEIR SPM	Kit
271	00.144.007.01694	1″ PLUG VALVE, FIG. 1502 Male x Female, PN:1A14483	– 1A14483		WEIR-SPM	pce
272	00.149.007.00351	1 IN PV REPAIR KIT, PN:4L11769	– 4L11769		WEIR-SPM	pce
273	00.040.001.06753	PLUG VALE 3” X 10 000 WP,TEMPRATURE CLASS p TO U, EE 1.5, GEAR BOX OPERATED, PN:ASG 73920	– ASG 73920		NOV-ANSON	pce
274	00.149.016.00023	Plug	SG14933		NOV-ANSON	pce
275	00.149.016.00024	Insert set	SG14935		NOV-ANSON	pce
276	00.149.016.00025	Insert O-ring	-206306		NOV-ANSON	pce
277	00.149.016.00026	Plug seal	-13828		NOV-ANSON	pce
278	00.149.016.00027	Adjusting nut oring – Gioăng tròn	-33163		NOV-ANSON	pce
279	00.149.016.00028	Roll pin	-13933		NOV-ANSON	pce
280	00.149.016.00029	Grease fitting	-13934		NOV-ANSON	pce
281	00.149.016.00030	Socket head capscrew	-40249		NOV-ANSON	pce
282	00.149.016.00031	Cirlip	-222308		NOV-ANSON	pce
283	00.037.022.00412	Standard grating size 25mm x 5mm (LB), dimention 1000mm x 6000mm; material: Hot deep galvanized	–			m2
284	00.037.022.00411	Standard grating foot step size 25mm x 5mm (LB), dimention 760mm X 230mm; material: Hot deep galvanized	–			pce
285	00.049.001.06991*	Bearing SKF ZZ6205	– SKF ZZ6205		SKF	pce
286	00.149.009.00145*	Fan Blade	– CARRIER9001087 modelLA01EW032	blade heat #R04777, spide SN #1203093501-0410	CARRIER	pce
287	00.149.009.00146*	High Pressure Danfoss – Pressure Control KP5	–	Range :+8/=32bar Pe Differential;1.8/6bar Press-conn:1/4 Flare ext Contact type: SPDT IP44	DANFOSS	pce
288	00.149.009.00147*	Low Pressure Danfoss – Low Pressure Contrrol	–	Range :- 0.9…7bar Pe Diff : 0.7 bar Conn : 1/4in flare	DANFOSS	pce
289	00.149.009.00148*	Oil Pressure	–	Diff : 6 psidRelease time : Without time delayConn : 30, 38 in cap tube &1/4 in flare nút HCF/HCFC/CFC HK 06 UC011	DANFOSS	pce
290	00.047.004.00086	Freon-407C (11.35 kg/can)	– R407C	Made in India and EU, G7		kg
291	00.149.007.00489	Charge lube oil PZ160	–			L
292	00.049.001.06500	Bearing	– 2307K		FAG	pce
293	00.149.002.00120	Refrigerant filter drier core for LQ HVAC refrigerant systems (Emerson Filer drier shell type STAS 967T), PN: STAS-967T	– STAS-967T		Emerson	set
294	00.049.001.06991*	Bearing SKF ZZ6205	– SKF ZZ6205		SKF	pce
295	00.149.009.00149*	Fan Blade	– CARRIER9001111 modelLA01EW035	blade heat #R04776, spide SN #0923093501	CARRIER	pce
296	00.149.009.00146*	High Pressure Danfoss – Pressure Control KP5	–	Range :+8/=32bar Pe Differential;1.8/6bar Press-conn:1/4 Flare ext Contact type: SPDT IP44	DANFOSS	pce
297	00.149.009.00147*	Low Pressure Danfoss – Low Pressure Contrrol	–	Range :- 0.9…7bar Pe Diff : 0.7 bar Conn : 1/4in flare	DANFOSS	pce
298	00.149.009.00148*	Oil Pressure	–	Diff : 6 psidRelease time : Without time delayConn : 30, 38 in cap tube &1/4 in flare nút HCF/HCFC/CFC HK 06 UC011	DANFOSS	pce
299	00.047.004.00086	Freon-407C (11.35 kg/can)	– R407C	Made in India and EU, G7		kg
300	00.149.007.00489	Charge lube oil PZ160	–			L
301	00.049.001.06500	Bearing	– 2307K		FAG	pce
302	00.149.002.00124	Refrigerant filter drier core for VFD HVAC refrigerant systems (Emerson Filer drier shell type STAS 485T), PN:STAS 485T)	– STAS 485T)		Emerson	set
303	00.049.001.06991*	Bearing SKF ZZ6205	– SKF ZZ6205		SKF	pce
304	00.149.009.00149*	Fan Blade	– CARRIER9001111 modelLA01EW035	blade heat #R04776, spide SN #0923093501	CARRIER	pce
305	00.149.009.00146*	High Pressure Danfoss – Pressure Control KP5	–	Range :+8/=32bar Pe Differential;1.8/6bar Press-conn:1/4 Flare ext Contact type: SPDT IP44	DANFOSS	pce
306	00.149.009.00147*	Low Pressure Danfoss – Low Pressure Contrrol	–	Range :- 0.9…7bar Pe Diff : 0.7 bar Conn : 1/4in flare	DANFOSS	pce
307	00.149.009.00148*	Oil Pressure	–	Diff : 6 psidRelease time : Without time delayConn : 30, 38 in cap tube &1/4 in flare nút HCF/HCFC/CFC HK 06 UC011	DANFOSS	pce
308	00.047.004.00086	Freon-407C (11.35 kg/can)	– R407C	Made in India and EU, G7		kg
309	00.149.007.00489	Charge lube oil PZ160	–			L
310	00.049.001.06500	Bearing	– 2307K		FAG	pce
311	00.149.002.00124	Refrigerant filter drier core for VFD HVAC refrigerant systems (Emerson Filer drier shell type STAS 485T), PN:STAS 485T)	– STAS 485T)		Emerson	set
312	00.049.001.06991*	Bearing SKF ZZ6205	– SKF ZZ6205		SKF	pce
313	00.149.002.00124	Refrigerant filter drier core for VFD HVAC refrigerant systems (Emerson Filer drier shell type STAS 485T), PN:STAS 485T)	– STAS 485T)		Emerson	set
314	00.149.002.00107	Condenser for ACCU. Model 038ARZ-12-C601S, Carier Serial number 0511S00231), Model 038ARZ-12-C601S  Includes: Heater – 01 piece; Fans – 02 pieces; Compressor – 01 piece	– Model038ARZ-12-C601S	Condenser for ACCU. Model 038ARZ-12-C601S, Carier Serial number 0511S00231) Power 480VAC/3ph/60Hz, Cooling R407C (capacity 72 kW). (charge refrigerant R407C and lube oil RH68). Consist: Condenser for ACCU – 01 set, Condenser fan; 480VAC/1ph/60Hz, motor 1/4 Hp – 2 set, Compressor Model SM120S4VC, serial number AJ1106222536 (460V/3Ph/60Hz) – 1 set. Maker Carrier.	Carrier	set
315	00.049.001.06991*	Bearing SKF ZZ6205	– SKF ZZ6205		SKF	pce
316	00.149.009.00149*	Fan Blade	– CARRIER9001111 modelLA01EW035	blade heat #R04776, spide SN #0923093501	CARRIER	pce
317	00.047.004.00086	Freon-407C (11.35 kg/can)	– R407C	Made in India and EU, G7		kg
318	00.149.007.00489	Charge lube oil PZ160	–			L
319	00.149.009.00150*	Filter Drier For Ler Hvac Refrigerant Systems	– WDK-304S,HH CA03-0697,PN KH45LD118	(make Listed type WDK-304S, HH CA03-0697, PN KH45LD118, inlet 1/2 ODF, outlet )	EMERSON	set
320	00.055.002.01038*	Air Conditioner, Mitsubishi Heavy24.000BTU, SRK/SRC24CS-S5 (2.5HP)	– SRK/SRC24CSS5 ( 2.5HP)		MITSUBISHI	set
321	00.038.012.00559*	Copper pipe Ø16mm OD,(wall thickness 1.24mm)	–			m
322	00.038.012.00560*	Copper pipe Ø6mm OD,(wall thickness 0.8mm)	–			m
323	00.038.019.00121*	Double Insulated Pipes For Air Conditioning Installation	–			m
324	00.041.005.00625*	Roll Of Insulation Tape	–	Simili roll to wrap copper pipes for air conditioners (air conditioner heat insulation copper pipe tape). Specialized heat insulation tape for the refrigeration industry with flexible, tough, weather-resistant material helps ensure the quality of genes, electrical wires, copper pipe Weight: 300 gr/roll		kg
325	00.055.002.01038*	Air Conditioner, Mitsubishi Heavy 24.000BTU, SRK/SRC24CS-S5 ( 2.5HP)	– SRK/SRC24CSS5 ( 2.5HP)		MITSUBISHI	set
326	00.038.012.00559*	Copper pipe Ø16mm OD,(wall thickness 1.24mm)	–			m
327	00.038.012.00560*	Copper pipe Ø6mm OD,(wall thickness 0.8mm)	–			m
328	00.038.019.00121*	Double Insulated Pipes For Air Conditioning Installation	–			m
329	00.041.005.00625*	Roll Of Insulation Tape	–	Simili roll to wrap copper pipes for air conditioners (air conditioner heat insulation copper pipe tape). Specialized heat insulation tape for the refrigeration industry with flexible, tough, weather-resistant material helps ensure the quality of genes, electrical wires, copper pipe Weight: 300 gr/roll

Field Failure Repair Case Studies

Case 1: Drawworks Thermal Bypass Manifold Failure

A Vietnam offshore rig experienced hydraulic fluid leakage in the UH 3G-500-3000DDW drawworks thermal bypass manifold, causing inconsistent brake pressure. Fault diagnosis revealed degraded check valves (27-9CHK-0030/0150) and damaged O-rings. Replacing the OEM-compatible check valves and Viton O-rings from this parts list restored full hydraulic pressure, eliminating leakage and resuming drilling operations within 2 hours.

Case 2: BOP Ram Shaft Seal Degradation

A Shaffer 21-1/4” x 2000PSI BOP ram shaft failed pressure testing due to worn polypak seals and wiper rings. Using the NOV-certified seal kit (155067) and replacement wiper rings (116236) from this catalog, technicians rebuilt the ram shaft assembly, passed hydrostatic testing, and restored well control compliance without rig demobilization.

Case 3: Mud Pump Valve Seat Wear

An E-1600 HP mud pump suffered reduced fluid output due to eroded valve seats in the suction module. Installing the Weatherford-compatible valve seat assemblies (P105617) resolved flow inefficiencies, restored mud circulation pressure, and prevented a full pump teardown, cutting maintenance downtime by 70%.

Frequently Asked Questions (FAQ)

Question	Answer
Are these spare parts fully compatible with my TTS UH 3G-500-3000DDW drawworks?	Yes, all listed drawworks parts are engineered to exact OEM dimensions and specifications, ensuring direct fitment and performance matching original TTS/Cameron components for UH 3G-500-3000DDW units.
Do BOP spare parts meet API 16A and ABS certification standards?	All BOP seals, gaskets, and actuation components comply with API 16A 4th edition, ABS, and API 6A PSL 4 requirements, making them suitable for offshore well control operations in Vietnam and global markets.
What is the typical service life of high-wear parts like O-rings and seal kits?	Under normal offshore operating conditions, Viton O-rings and nitrile seal kits last 1,000–1,500 drilling hours; heavy-duty bearing assemblies and valve components have a 3,000–5,000 hour service life with proper lubrication.

Procurement Guidance & Value Proposition

For Vietnam offshore drilling operations, investing in these OEM-compatible rig spare parts eliminates the risks of counterfeit components, fitment errors, and extended downtime that plague generic replacement parts. This catalog serves as both a definitive procurement standard and a technical reference for troubleshooting, repairs, and routine maintenance, ensuring your rig operates at peak efficiency while meeting strict offshore safety and regulatory mandates.