Product Introduction
This curated assortment covers all mission-critical wear, sealing, structural, and service components for Bomco F-1600 mud pumps, including 5” to 7” hardened steel liners, White Lightning bonded pistons, API-rated valve assemblies, pulsation dampener bladders, high-pressure gaskets/O-rings, precision fasteners, and hydraulic valve seat pullers. All parts undergo factory pressure testing validated for up to 70MPa operating pressure, with full material traceability and compliance with API 7K standards. The lineup features abrasion-resistant fluid end components, oil-resistant elastomer seals, high-tensile alloy steel fasteners, and pre-calibrated service tools, fully mapped to original Bomco F-1600 part numbers for simplified inventory management and emergency field repairs.
Functional Performance Specifications
These Bomco F-1600 mud pump spare parts deliver industry-leading drilling circulation reliability: OEM hardened liners and White Lightning pistons maintain 70MPa high-pressure mud circulation with a service life of 25,000+ operating hours; API valve assemblies provide 99.9% leak-free fluid control, reducing mud loss by 35%; pulsation dampener bladders stabilize pressure fluctuations, lowering pump vibration by 40%; high-temperature elastomer seals resist abrasive drilling mud and chemical exposure; and precision fasteners maintain torque retention under extreme pump cycling, preventing fluid end separation.
Structural & Material Features
- Abrasion-Resistant Fluid End Components: Liners and pistons use hardened chrome alloy steel, engineered to withstand abrasive drilling mud and extend wear life in high-cycle pumping operations.
- High-Pressure Sealing Technology: Multi-stage gaskets, O-rings, and piston seals use fluoroelastomer compounds, rated for 70MPa pressure and resistant to drilling fluid chemicals and temperature fluctuations.
- High-Tensile Alloy Fasteners: All fluid end and assembly bolts/nuts use heat-treated alloy steel, meeting API torque specifications and resisting fatigue from pump vibration and thermal cycling.
- Precision Machining Tolerances: Valve guides, liners, and alignment rings are manufactured to tight tolerances (±0.0002 inch), ensuring perfect fitment and eliminating misalignment-related failures.
- Modular Wear Component Design: Pre-sized liners, pistons, and valve kits streamline pump overhauls, cutting maintenance downtime by 60% during critical circulation repairs.
Applicable Operating Conditions
These spare parts are built forharsh onshore and offshore drilling environments, optimized for Bomco F-1600 mud pumps deployed in land drilling rigs, offshore platforms, and modular drilling systems. They perform reliably in ambient temperatures ranging from -20°F to 150°F, resist exposure to abrasive drilling mud, drilling chemicals, saltwater, and heavy pump vibration, and comply with API 7K safety standards for high-pressure mud circulation systems.
Maintenance & Service Recommendations
- Inspect mud pump liners, pistons, and valve assemblies every 3 months for wear, scoring, or leakage; replace worn components to maintain high-pressure circulation and prevent pump failure.
- Check all seals, gaskets, and O-rings quarterly for swelling or degradation; replace damaged seals to eliminate mud leakage and preserve pump efficiency.
- Inspect pulsation dampener bladders, pressure gauges, and purge valves semi-annually; test pressure stability and replace worn dampener components to maintain consistent pump performance.
- Retorque all fluid end fasteners to OEM torque specifications every 8,000 operating hours, replacing stretched or fatigued bolts/nuts to prevent component loosening.
- Lubricate valve guides and moving components per OEM intervals, and inspect piston rods for wear to extend pump service life.
- Stock high-wear consumables (liners, pistons, seals, valves) at recommended minimum levels to eliminate unplanned Bomco F-1600 pump shutdowns.
- We supply the following spare parts:
| ITEM | DESCREPTION | Part Number | UNIT |
| 1 | BLADDER, F/KB-75 PULSATION DAMPNER – MFG: BOMCO – P/N# AK7535010200 | AK7535010200 | EA |
| 2 | CLAMP ASSY. – MFG: BOMCO P/N#AH130102050600 | AH130102-050600 | EA |
| 3 | GASKET, LINER MUD PUMP MFG: BOMCO P/N# AH1301010512 | AH1301010512 | EA |
| 4 | PLATE, WEAR MUD PUMP – MFG: BOMCO – P/N# AH1301020503 | AH130102-0503 | EA |
| 5 | LINER, 5” – MFG: NOV Mission for BOMOCO F-1600 PUMP P/N# 05499500HP | 05499500HP | EA |
| 6 | LINER, 5 1/2” – MFG: NOV Mission for BOMOCO F-1600 PUMP P/N# 05499550H | 05499550HP | EA |
| 7 | LINER, 6” – MFG: NOV Mission for BOMOCO F-1600 PUMP P/N# 05499600HP | 05499600HP | EA |
| 8 | LINER, 6 1/2” – MFG: NOV Mission for BOMOCO F-1600 PUMP P/N# 05499650HP | 05499650HP | EA |
| 9 | LINER, 7” – MFG: NOV Mission for BOMOCO F-1600 PUMP P/N# 05499700HP | 05499700HP | EA |
| 10 | PISTON BONDED WHITE LIGHTNING PISTONS SIZE: 5″ – MFG: NOV – P/N# 1502056XT | 1502056XT | EA |
| 11 | PISTON BONDED WHITE LIGHTNING PISTONS: 5-1/2″ – MFG: NOV – P/N # 1502058XT | 1502058XT | EA |
| 12 | PISTON BONDED WHITE LIGHTNING PISTONS: 6″ – MFG: NOV – P/N# 1502060XT | 1502060XT | EA |
| 13 | PISTON BONDED WHITE LIGHTNING PISTONS: 6 ½” – MFG: NOV – P/N# 1502062XT | 1502062XT | EA |
| 14 | PISTON BONDED WHITE LIGHTNING PISTONS: 7″ – MFG: NOV – P/N# 1502064XT | 1502064XT | EA |
| 15 | SEAT, VALVE, ROUGHNECK, NOVATECH – MFG: NOV MIS – P/N# 9702504 | 9702504 | EA |
| 16 | VALVE, ASSEMBLY WL-HD-7-VO1 – MFG : NOV – P/N#9700368 | 9700368 | EA |
| 17 | VALVE, ASSY API 7 -MFG: BOMCO P/N# AH0000020300 | AH0000020300 | EA |
| 18 | INSERT, VALVE – MFG: BOMCO P/N#AH000002030103 | AH000002030103 | EA |
| 19 | SEAL, COVER VALVE MUD PUMP MFG: BOMCO P/N# AH1301010510 | AH1301010510 | EA |
| 20 | NUT, ROD PISTON -MFG: BOMCO P/N# T501-303.0 | T501-303.0 | EA |
| 21 | GUIDE, UPPER VALVE MUD PUMP BOMCO – MFG: BOMCO – P/N# AH1001010510 | AH100101-0510 | EA |
| 22 | PULLER, VALVE SEAT HYDRAULIC VALVE SEAT LIFTING TOOL MFG: BOMCO P/N# AH130101160600 | AH130101160600 | EA |
| 23 | FLANGE, LINER – MFG: BOMCO P/N#AH1301010514 (Liner Thread Ring) | AH130101-0514 | EA |
| 24 | BOLT 1 1/4-12UNS/1-8UNC×7 1/2 (FOR THREAD RING) | T500-5005 | EA |
| 25 | NUT 1-8UNC (FOR THREAD RING) | AH130102-050102 | EA |
| 26 | CYLINDER THREAD RING | AH130101-0502 | EA |
| 27 | CYLINDER HEAD COVER | AH130101-0503 | EA |
| 28 | FLASHBOARD ASSEMBLY ( VALVE GUIDE INSERT) | AH130101-050400B2 | EA |
| 29 | VALVE GUIDE(LOWER) | AH130101-050500 | EA |
| 30 | CYLINDER HEAD PLUG | AH130101-050600 | EA |
| 31 | ALIGNMENT RING | AH130101-0507 | EA |
| 32 | CYLINDER HEAD SEAL | AH130101-0508 | EA |
| 33 | VALVE SPRING | AH100101-0529 | EA |
| 34 | O-RING Φ95X5.3 ( DISCHARGE MANIFOLD SEAL) | 5.30301E+17 | EA |
| 35 | VALVE COVER | AH130102-0502 | EA |
| 36 | NUT 1 1/2-8UN(FOR FLUID END) | T501-2001 | EA |
| 37 | BLOT 1 1/2-12UNF/1 1/2-8UN×5 (FOR FLUID END) | T500-5007 | EA |
| 38 | WASHER 39 (FOR FLUID END) | AH100101-0527 | EA |
| 39 | BOLT 7/8-9UNC×2 (FOR FLUID END) | T500-1027 | EA |
| 40 | STUD 1 1/2-12UNF/1 1/2-8UN×6 3/4 ( FOR FLUID END) | T500-5006 | EA |
| 41 | STUD 1 1/2-8UN×22 1/4 ( FOR FLUID END) | AH130102-0513 | EA |
| 42 | LOCTITE 243 | 1.70506E+17 | EA |
| 43 | O-RINGΦ185X7 | 5.30301E+17 | EA |
| 44 | STUD 1 1/2-8UN×10 1/2 | T500-7002 | EA |
| 45 | NUT 1 1/2-8UN | T507-2001 | EA |
| 46 | NUT 1 1/4-8UN | T501-2002 | EA |
| 47 | STUD 1 1/4-12UNF/1 1/4-8UN×73/4 | T500-5008 | EA |
| 48 | LINER LOCK FOR MUD PUMP F-1600 | AH130101-0515B1 | EA |
| 49 | O-RINGΦ200X7 | 5.30301E+17 | EA |
| 50 | PISTON ROD FOR MUD PUMP F-1600 | AH130102-0504 | EA |
| 51 | LINER LOCK RING | AH130101-0518 | EA |
| 52 | VALVE GUIDE (UPPER) | AH100101-0510 | EA |
| 53 | VALVE GUIDE RETAINER | AH100101-0512 | EA |
| 54 | BOLT 3/8-16UNC×3/4 | AH050102-0509 | EA |
| 55 | STAINLESS WIRE Φ1.6 L=1830 | 4.0104E+16 | EA |
| 56 | PISTON SEAL | AH100101-0515 | EA |
| 57 | MANUAL HYDRAULIC PUMP 70MPA | 5.12605E+17 | Set |
| 58 | DISCHARGE STRAINER ASSEMBLY | AH100101190200 | EA |
| 59 | O-RING165×7(GB3452.1-82) ( DISCHARGE STAINER CAP SEAL) | 5.30301E+17 | EA |
| 60 | FLUID BAFFLE DISC | AH1301010408 | EA |
| 61 | BOTTOM PLUG ( PULSATION DAMPENER ) | AK75350101 | EA |
| 62 | STEEL PIPE TEE 1/4″ ( PULSATION DAMPENER ) | T511-2001 | EA |
| 63 | CONNECTOR 1/4″ ( PULSATION DAMPENER ) | AK75350106 | EA |
| 64 | PURGE VALVE ( PULSATION DAMPENER ) | AK7535010001 | EA |
| 65 | DOUBLE SCALE PRESSURE GAUGE 0-25MPA NPT 1/4 ( PULSATION DAMPENER ) | 3.80202E+17 | EA |
| 66 | NEEDLE VALVE WASHER ( PULSATION DAMPENER ) | AK7535010002 | EA |
| 67 | WASHER ( PULSATION DAMPENER ) | T514-1001 | EA |
| 68 | NUT ( PULSATION DAMPENER CHARGING HOSE ) | AH33001-31.10.01A | EA |
| 69 | SEALING CONNECTOR ( PULSATION DAMPENER CHARGING HOSE ) | AH33001-31.10.02 | EA |
| 70 | HOSE H14X1.5 ( PULSATION DAMPENER CHARGING HOSE) | JB1887-77 | EA |
| 71 | CONNECTOR ( PULSATION DAMPENER CHARGING HOSE ) | AH33001-31.10.03 | EA |
| 72 | GASKET ( PULSATION DAMPENER CHARGING HOSE) | AH33001-31.10.04 | EA |
| 73 | PIPE PLUG ( PULSATION DAMPENER CHARGING HOSE ) | AH33001-31.10.05 | EA |
Field Failure Repair Case Studies
Case 1: Liner Wear Causing Pressure Loss
A Bomco F-1600 mud pump experienced severe 6” liner wear, leading to 70MPa circulation pressure depletion. Installing OEM NOV Mission liners and bonded pistons restored full high-pressure mud flow, resuming drilling operations.
Case 2: Pulsation Dampener Bladder Failure
A degraded KB-75 pulsation dampener bladder caused extreme pressure fluctuations and pump vibration, damaging fluid end components. Replacing the OEM Bomco bladder stabilized pressure and eliminated excessive vibration.
Case 3: Valve Assembly Leakage
Worn API valve seats and assemblies led to persistent mud backflow, reducing pump output. Swapping in OEM Bomco valve inserts and seats sealed the fluid end, restoring full pumping efficiency.
Frequently Asked Questions (FAQ)
| Question | Answer |
| Are these parts exclusively compatible with Bomco F-1600 mud pumps? | Yes, this catalog features OEM-matched parts engineered solely for Bomco F-1600 mud pumps, with NOV components fully cross-compatible for direct replacement. |
| Do these mud pump parts meet API 7K high-pressure standards? | Absolutely, all components comply with API 7K drilling equipment standards, rated for up to 70MPa high-pressure mud circulation duty. |
| What liner sizes are included in this spare parts list? | This catalog includes 5”, 5½”, 6”, 6½”, and 7” OEM liners, covering all standard Bomco F-1600 mud pump fluid end configurations. |
Procurement Guidance & Closing Value Statement
This Bomco F-1600 mud pump spare parts catalog serves as both a formal oilfield procurement benchmark and a hands-on technical troubleshooting reference, designed to eliminate the risks of substandard aftermarket parts that fail prematurely under high pressure, reduce long-term pump maintenance expenses, and uphold the safety and operational reliability of your drilling circulation system. Every part is a verified OEM-certified component that guarantees perfect fitment, consistent high-pressure performance, and full adherence to API and global drilling standards, making it the definitive resource for maintaining Bomco F-1600 mud pumps.
Whether you need to replace worn liners, degraded pistons, faulty valve assemblies, damaged seals, or pulsation dampener components to restore your pump to full working order, or stock critical API-certified spares for routine maintenance and unforeseen circulation breakdowns, this catalog provides the exact part numbers, quantities, and high-pressure specifications your drilling operation demands. Secure your supply of authentic Bomco F-1600 mud pump spare parts today to protect your rig circulation investment, maintain uninterrupted drilling progress, and keep your mud pump operating safely and efficiently in harsh abrasive drilling environments.
