Product Description
This comprehensive collection of Kawasaki marine spare parts includes precision-machined backup rings, industrial-grade O-rings, high-load bearings, corrosion-resistant locking wire, custom-formulated sealants, shims, gaskets, and specialized hardware for complete marine propulsion system overhauls. Designed as direct drop-in replacements for OEM Kawasaki components, each part is manufactured to strict dimensional tolerances (±0.01mm for critical sealing surfaces) to eliminate compatibility issues. Unlike generic marine parts that degrade quickly in saltwater and oil-exposed environments, these components are built with marine-grade materials: NBR O-rings for oil and seawater resistance, case-hardened steel bearings for heavy radial thrust loads, Teflon backup rings for high-pressure sealing, and zinc/aluminum anodes for cathodic corrosion protection.
Functional Performance Attributes
- Sealing Performance: NBR O-rings (JIS B2401 certified) deliver a leak-proof seal for hydraulic oil, lubricants, and seawater, operating reliably at pressures up to 210 bar and temperatures ranging from -30°C to 120°C.
- Bearing Durability: Precision roller and sleeve bearings (0243/0250/0251 series) support high radial and thrust loads, with a static load rating of 120kN and dynamic load rating of 85kN, minimizing friction and wear in rotating shaft assemblies.
- Corrosion Resistance: Zinc anodes, stainless steel hardware, and salt-tested sealing components comply with marine anti-corrosion standards, extending component life by 60% in offshore saltwater environments.
- Vibration Resistance: Locking wire, split cotter pins, and locking plates prevent fastener loosening under extreme vessel vibration, maintaining mechanical integrity during high-thrust thruster operation.
- Sealant Adhesion: Three Bond TB1101/TB1212 and MR GS2 gasket sealants create a permanent, flexible seal for flanged connections, resisting oil degradation and thermal cycling.
Structural Characteristics
Each Kawasaki-compatible spare part is designed to mirror OEM structural specifications for seamless integration: O-rings feature a round cross-section with uniform wall thickness for even compression; backup rings (Teflon JIS B2407) provide extrusion resistance for high-pressure seals; bearings have precision-ground raceways for smooth rotation; locking wire is malleable yet high-tensile for secure fastener retention; and shims/spacers offer precise thickness calibration for shaft alignment. Critical components like oil seals and mechanical seals feature a dual-lip design to prevent lubricant leakage and block contaminants, while anodes are machined to exact mounting profiles for optimal cathodic protection. All parts are compact and lightweight, designed to fit within the tight confines of marine thruster and platform assemblies without modification.
Applicable Operating Conditions
These Kawasaki marine spare parts are engineered for the harshest maritime operating environments, including:
- Offshore drilling platforms, container vessels, and offshore support vessels with Kawasaki thruster assemblies (FIG. 1/2/3)
- Marine hydraulic systems, gear boxes, and CPP (Controllable Pitch Propeller) feedback mechanisms
- Saltwater-exposed platform assemblies, swivel seals, and pump drive shafts
- High-vibration, high-load propulsion systems operating in offshore and coastal marine conditions
- Marine lubrication systems, oil coolers, and hydraulic piping circuits (ISO VG68 media compatible)
Marine Maintenance & Installation Best Practices
- Pre-Installation Inspection: Verify part numbers match OEM specifications, inspect O-rings/seals for cracks or defects, and clean mating surfaces to remove salt deposits, old sealant, and debris.
- Seal Installation Protocol: Lubricate O-rings and backup rings with compatible marine grease before installation to prevent twisting; avoid using sharp tools that may damage sealing surfaces.
- Bearing & Shaft Alignment: Use precision shims to adjust shaft alignment, ensuring bearing raceways are fully seated and lubricated with ISO VG68 marine oil prior to operation.
- Fastener Securing: Apply locking wire per OEM diagrams, torque bolts to specified marine-grade torque values, and install split cotter pins to prevent vibration-induced loosening.
- Post-Repair Testing: Conduct pressure testing (1.5x operating pressure) for sealing systems and run a low-thrust test cycle to verify bearing and shaft performance before full operation.
- Preventive Replacement Schedule: Replace O-rings and seals every 2 years, bearings every 5 years, and anodes annually to mitigate corrosion and wear-related failures.
We supply the following spare parts:
| S.NO | DESCRIPTION | UoM |
| 1 | MATERIAL DESCRIPTION: RING, BACK-UP: FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0188; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 2 | O RING: FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0189; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 3 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0191; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 4 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0192; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 5 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0193; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 6 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.0194; FIG. NO, 1 THRUSTER ASSEMBLY | EA |
| 7 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE. FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0195; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 8 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0197; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 9 | MATERIAL DESCRIPTION: PACKING: (CU,PACKING),FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, L TO.: PART NO.0198; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 10 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER HUB OVERHAUL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.3810; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 11 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0190; FIG. NO. 1THRUSTER ASSEMBLY | EA |
| 12 | MATERIAL DESCRIPTION WIRE: LOCKING WIRE. FOR PROPELLER SHAFT OVERHAUL KIT. MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0196; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 13 | MATERIAL DESCRIPTION: SHIM: SHIM(2);FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0215; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 14 | MATERIAL DESCRIPTION: SEAL: PARTS KIT FOR SHAFT SEAL, FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.231·6; FIG. NO. 1 THRUSTER ASSEMBLY | EA |
| 15 | MATERIAL DESCRIPTION: BEARING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0250; FIG. NO. 1 THRUSTER ASSEMBLY | EA |
| 16 | MATERIAL DESCRIPTION; BEARING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0251; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 17 | MATERIAL DESCRIPTION: BEARING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0252; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 18 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0295;FIG. NO. 1 THRUSTER ASSEMBLY | EA |
| 19 | MATERIAL DESCRIPTION: BOLT: HEXAGON SOCKET HEAD BOLT, FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES,LTD.: FIG. NO.0375; FIG. NO. 1 THRUSTER ASSEMBLY | EA |
| 20 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0385; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 21 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0386; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 22 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0387; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 23 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0392; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 24 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0398; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 25 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0399; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 26 | MATERIAL DESCRIPTION: SPACER: SPACER(7),FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.2803; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 27 | MATERIAL DESCRIPTION: WASHER: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.2804; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 28 | MATERIAL DESCRIPTION: PLATE: LOCKING PLATE, FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 2805; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 29 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 3808; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 30 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 3809; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 31 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.3811 ; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 32 | MATERIAL DESCRIPTION: PACKING: (CU-PACKING)FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.3812; FIG. NO.1 THRUSTER ASSEMBLY | EA |
| 33 | MATERIAL DESCRIPTION: SEAL, OIL: FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0235-5; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 34 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0388; FIG, NO.2 PLATFORM ASSEMBLY | EA |
| 35 | MATERIAL DESCRIPTION: ORING: FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0389; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 36 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD,: PART NO,0390; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 37 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD,: PART NO.0391; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 38 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0481; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 39 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0482; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 40 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0488; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 41 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0592; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 42 | MATERIAL DESCRIPTION: RING: SAFRON RING, FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.4802; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 43 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.4802,1; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 44 | MATERIAL DESCRIPTION: CAP: CAP SEAL, FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.4803; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 45 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.4803-1; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 46 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL SEAL REPLACEMENT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.5803; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 47 | MATERIAL DESCRIPTION: BEARING: FOR PINION SHAFT OVERHAUL KIT, (UPPER SIDE) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 0245; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 48 | MATERIAL DESCRIPTION: BEARING: FOR PINION SHAFT OVERHAUL KIT (UPPER SIDE) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0246: FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 49 | MATERIAL DESCRIPTION: SHIM: FOR PINION SHAFT OVERHAUL KIT (UPPER SIDE) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0504; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 50 | MATERIAL DESCRIPTION: PACKING: FOR CLUTCH OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0507; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 51 | MATERIAL DESCRIPTION: O RING: FOR CLUTCH OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0585; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 52 | MATERIAL DESCRIPTION: O RING: FOR CLUTCH OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0586; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 53 | MATERIAL DESCRIPTION: O RING: FOR CLUTCH OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0588; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 54 | MATERIAL DESCRIPTION: CAP: FOR CLUTCH OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.0945; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 55 | MATERIAL DESCRIPTION: SHIM: SHIM(1).FOR CLUTCH OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.5620; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 56 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR CLUTCH OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.941-19; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 57 | MATERIAL DESCRIPTION: EA 1 BEARING: FOR GEAR BOX OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0244; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 58 | MATERIAL DESCRIPTION: EA 1 SPACER: SPCAER(2),FOR GEAR BOX OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0286; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 59 | MATERIAL DESCRIPTION: SHIM: SHIM(1),FOR GEAR BOX OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0288; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 60 | MATERIAL DESCRIPTION: SHIM: SHIM(1).FOR GEAR BOX OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.0503; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 61 | MATERIAL DESCRIPTION: O RING: FOR GEAR BOX OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.0587; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 62 | MATERIAL DESCRIPTION: SEAL, OIL: FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.0238; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 63 | MATERIAL DESCRIPTION: BEARING: FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0241; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 64 | MATERIAL DESCRIPTION: BEARING: FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0242; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 65 | MATERIAL DESCRIPTION: O RING: FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 294; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 66 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO 0295; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 67 | MATERIAL DESCRIPTION: O RING: FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0489; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 68 | MATERIAL DESCRIPTION: PACKING: FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.0506; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 69 | MATERIAL DESCRIPTION: O RING: FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.0589; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 70 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE. FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.2809; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 71 | MATERIAL DESCRIPTION: O RING: INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.5804; FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 72 | MATERIAL DESCRIPTION: PIN, COTTER SPLIT: FOR INPUT SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. UJ;FIG. NO. 2 PLATFORM ASSEMBLY | EA |
| 73 | MATERIAL DESCRIPTION: BEARING: FOR PUMP DRIVE SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0253; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 74 | MATERIAL DESCRIPTION: O RING: FOR PUMP DRIVE SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0590; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 75 | MATERIAL DESCRIPTION: O RING: FOR PUMP DRIVE SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.0591; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 76 | MATERIAL DESCRIPTION: WASHER, LOCK: FOR PUMP DRIVE SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.5604; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 77 | MATERIAL DESCRIPTION: SEAL, OIL: FOR PUMP DRIVE SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.5800; FIG. NO.3 PLATFORM ASSSEMBLY | EA |
| 78 | MATERIAL DESCRIPTION: SEAL. OIL: FOR SWIVEL PINION MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.0239; FIG. NO. 3 PLATFORM ASSEMBLY | EA |
| 79 | MATERIAL DESCRIPTION: BEARING: FOR SWIVEL PINION MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0254; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 80 | MATERIAL DESCRIPTION: WASHER: FOR SWIVEL PINION MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0269; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 81 | MATERIAL DESCRIPTION: RING, RETAINING: FOR SWIVEL PINION MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0476; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 82 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL PINION MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0490; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 83 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL PINION MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0491; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 84 | MATERIAL DESCRIPTION: O RING: FOR SWIVEL PINION MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0492; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 85 | MATERIAL DESCRIPTION: PIN, CODER SPLIT: FOR BLADE ANGLE TRANSMIDER OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.7270; FIG. NO. 4 LINK MECHANISM OF CPP FEEDBACKSYSTEM | EA |
| 86 | MATERIAL DESCRIPTION: PIN, COTTER SPLIT: FOR BLADE ANGLE TRANSMITTEROVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.7271; FIG. NO.4 LINK MECHANISM OF CPP FEEDBACK SYSTEM | EA |
| 87 | MATERIAL DESCRIPTION: PIN, COTTER SPLIT: FOR BLADE ANGLE TRANSMITTER OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.7272; FIG. NO. 4 LINK MECHANISM OF CPP FEEDBACK SYSTEM | EA |
| 88 | MATERIAL DESCRIPTION: PIN, COTTER SPLIT: FOR BLADE ANGLE TRANSMITTER OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.7273; FIG. NO.4 LINK MECHANISM OF CPP FEEDBACK SYSTEM | EA |
| 89 | MATERIAL DESCRIPTION: GASKET: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0-3-1; DWG. NO. 3142100 | EA |
| 90 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.D-4-1; DWG. NO. 3142100 | EA |
| 91 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.D-4-2; DWG. NO. 3142100 | EA |
| 92 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.D-4-3; DWG. NO. 3142100 | EA |
| 93 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD,: PART NO,D-5-1; DWG, NO, 3142100 | EA |
| 94 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD,: PART NO,D-5-2; DWG, NO, 3142100 | EA |
| 95 | MATERIAL DESCRIPTION: ORING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.D-6-1; DWG. NO. 3142100 | EA |
| 96 | MATERIAL DESCRIPTION: ORING: FOR PIPING MANUFACTURER REFERENCES 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0,6,2; DWG. NO. 3142100 | EA |
| 97 | MATERIAL DESCRIPTION: GASKET: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.L-1-1; DWG. NO. 3142100 | EA |
| 98 | MATERIAL DESCRIPTION: GASKET: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.L-2-1; DWG. NO. 3142100 | EA |
| 99 | MATERIAL DESCRIPTION: GASKET: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.L-2-2; DWG. NO. 3142100 | EA |
| 100 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.L·3·1; DWG. NO. 3142100 | EA |
| 101 | MATERIAL DESCRIPTION: ORING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. L·3·2; DWG. NO. 3142100 | EA |
| 102 | MATERIAL DESCRIPTION: ORING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.P-1-1; DWG. NO. 3142100 | EA |
| 103 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P,1,2; DWG. NO. 3142100 | EA |
| 104 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P·2·1; DWG. NO. 3142100 | EA |
| 105 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P·2-2; DWG. NO. 3142100 | EA |
| 106 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P·3-1; DWG. NO. 3142100 | EA |
| 107 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P·3-2; DWG. NO. 3142100 | EA |
| 108 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.P·3-3; DWG. NO. 3142100 | EA |
| 109 | MATERIAL DESCRIPTION O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.p.3-4; DWG. NO. 3142100 | EA |
| 110 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.P-4·1; DWG. NO. 3142100 | EA |
| 111 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P-4-2; DWG. NO. 3142100 | EA |
| 112 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P-4-3; DWG. NO. 3142100 | EA |
| 113 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P-4-4; DWG. NO. 3142100 | EA |
| 114 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P·5·1; DWG. NO. 3142100 | EA |
| 115 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P-5-2; DWG. NO. 3142100 | EA |
| 116 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.P-6-1; DWG. NO. 3142100 | EA |
| 117 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.P-6-2; DWG. NO. 3142100 | EA |
| 118 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.P-7-1; DWG. NO. 3142100 | EA |
| 119 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.S-1-1 DWG. NO. 3142100 | EA |
| 120 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.S-1-2; DWG. NO. 3142100 | EA |
| 121 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.S-2-1; DWG. NO. 3142100 | EA |
| 122 | MATERIAL DESCRIPTION: O RING: FOR PIPING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.S-2-2; DWG. NO. 3142100 | EA |
| 123 | MATERIAL DESCRIPTION: EA 2 BEARING: FOR PUMP OVERHAUL KIT (1) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 120; FIG. NO.3 PLATFORM ASSEMBLY | EA |
| 124 | MATERIAL DESCRIPTION: O RING: FOR PUMP OVERHAUL KIT (1) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 376; DWG. NO. 02440·0799 | EA |
| 125 | MATERIAL DESCRIPTION: RING, BACK·UP: FOR PUMP OVERHAUL KIT (1) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.376·1; DWG. NO. 02440-0799 | EA |
| 126 | MATERIAL DESCRIPTION: O RING: FOR PUMP OVERHAUL KIT (1) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 436; DWG, NO. 02440·0799 | EA |
| 127 | MATERIAL DESCRIPTION: SEAL, OIL: FOR PUMP OVERHAUL KIT (1) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 510: DWG. NO. 02440-0799 | EA |
| 128 | MATERIAL DESCRIPTION: O RING: FOR PUMP OVERHAUL KIT (1) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 522; DWG. NO. 02440-0799 | EA |
| 129 | MATERIAL DESCRIPTION: O RING: FOR PUMP OVERHAUL KIT (1) MANUFACTURER REFERENCES: . 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO. 531; DWG. NO. 02440-0799 | EA |
| 130 | MATERIAL DESCRIPTION: O RING: FOR PUMP OVERHAUL KIT (1) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 536; DWG. NO. 02440·0799 | EA |
| 131 | MATERIAL DESCRIPTION: SEAL, MECHANICAL: FOR PUMP OVERHAUL KIT (2) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 510; DWG. NO. 02440·0799 | EA |
| 132 | MATERIAL DESCRIPTION: O RING: FOR PUMP OVERHAUL KIT (2) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 531; DWG. NO. 02440-0799 | EA |
| 133 | MATERIAL DESCRIPTION: O RING: FOR PUMP OVERHAUL KIT (2) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 536; DWG. NO. 02440-0799 | EA |
| 134 | MATERIAL DESCRIPTION: PACKING: FOR OIL COOLER MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 12;DWG. NO. Y-2120-1 | EA |
| 135 | MATERIAL DESCRIPTION: PACKING: FOR OIL COOLER MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 13;DWG. NO. Y,2120,1 | EA |
| 136 | MATERIAL DESCRIPTION: O RING: FOR OIL COOLER MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 14;DWG. NO. Y-2120-1 | EA |
| 137 | MATERIAL DESCRIPTION: SEALANT: THREE BOND NO.1101, FOR OTHER RECOMMENDEDPARTS MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.TB1101 | EA |
| 138 | MATERIAL DESCRIPTION: SEALANT: MR GS2 GASKET SEALENT, FOR OTHER RECOMMENDED PARTS MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD,: PART NO.TB1102 | EA |
| 139 | MATERIAL DESCRIPTION: SEALANT: THREE BOND NO. 1212, FOR OTHER RECOMMENDED PARTS MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.TB1212 | EA |
| 140 | MATERIAL DESCRIPTION: WIRE: LOCKING, FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0400-1; FIG. NO. 1; ASSY. NO. THRUSTER ASSEMBLY | EA |
| 141 | MATERIAL DESCRIPTION: BOLT: SOCKET, HEXAGON HEAD MANUFACTURER REFERENCES 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEMNO. 0290; FIG. NO. 3; ASSY. NO. PLATFORM ASSEMBLY | EA |
| 142 | MATERIAL DESCRIPTION: SLIDING BLOCK MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.7212; FIG. NO.5; ASSY. NO. LINK MECHANISM OF CPP FEEDBACK SYSTEM | EA |
| 143 | MATERIAL DESCRIPTION: O RING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. P·7·2; FIG. NO. 6 | EA |
| 144 | MATERIAL DESCRIPTION: O RING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 31 ;FIG. NO.7; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM | EA |
| 145 | MATERIAL DESCRIPTION: O RING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 032-1; FIG. NO.7; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM | EA |
| 146 | MATERIAL DESCRIPTION: O RING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: DWG.ITEM NO. 32-2; FIG. NO.7; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM | EA |
| 147 | MATERIAL DESCRIPTION: BEARING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: DWG.ITEMNO. 12; FIG. NO.7; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM | EA |
| 148 | MATERIAL DESCRIPTION; SEAL, OIL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO.5; FIG. NO.7; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM | EA |
| 149 | MATERIAL DESCRIPTION: PACKING: FOR PUMP OVERHAUL KIT (2) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO. 6; FIG. NO.7 | EA |
| 150 | MATERIAL DESCRIPTION: SHIM: FOR MOTOR MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: PART NO.5607; FIG. NO. 9 | EA |
| 151 | MATERIAL DESCRIPTION: FILTER, ELEMENT: ISO VG68 MEDIA, 20 U, PAPER, SECC FILTER MATERIAL MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. UH-16-20-IVNM ; DWG. NO. CA-000-458; DWG. ITEM NO.4; ASSY. NO. UH LINE FILTER | EA |
| 152 | MATERIAL DESCRIPTION: O RING: NITRILE BUTADIENE RUBBER, JIS B2401, 1B, G-110 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. UH-16-20·IVNM ; DWG. NO. CA·000-458; DWG. ITEM NO. 10; ASSY. NO. UH LINE FILTER (6), UH – 16-20 i – IVNM | EA |
| 153 | MATERIAL DESCRIPTION: O RING: NBR, JIS B2401·1A, SIZE: G-65 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO UH-16-20i-IVNM; DWG. NO. CA-000-458; DWG. ITEM NO. 11; ASSY. NO. UH LINE FILTER (6) | EA |
| 154 | MATERIAL DESCRIPTION; O RING: NITRILE BUTADIENE RUBBER. JIS B2401-1A. G-60 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO L TO: MODEL NO. UH-16-20-IVNM ; DWG. NO. CA-000-458; DWG. ITEM NO. 12; ASSY. NO. UH LINE FILTER (6). UH -16 – 20 i -IVNM | EA |
| 155 | MATERIAL DESCRIPTION: O RING: NBR. JIS B2401-1A, SIZE: G-25 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. UH-16-20i-IVNM; DWG. NO. CA-000-458; DWG.ITEM NO.13; ASSY. NO. UH LINE FILTER (6) | EA |
| 156 | MATERIAL DESCRIPTION: O RING: NBR, JIS B2401-1 A, SIZE: G-45 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO.UH·16·20i·IVNM; DWG. NO. CA·000-458; DWG. ITEM NO.14; ASSY. NO. UH LINE FILTER (6) | EA |
| 157 | MATERIAL DESCRIPTION: O RING: NBR, JIS B2401-1B, SIZE: P-18 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. UH-I6-20i-IVNM; DWG. NO. CA-000-458; DWG. ITEM NO. 15; ASSY. NO. UH LINE FILTER (6) | EA |
| 158 | MATERIAL DESCRIPTION: O RING: NITRILE BUTADIENE RUBBER, JIS B2401-1B, P-18 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. UH·16-20-IVNM ; DWG. NO. CA-000-458; DWG. ITEM NO. 16; ASSY. NO. UH LINE FILTER | EA |
| 159 | MATERIAL DESCRIPTION: O RING: NITRILE BUTADIENE RUBBER. JIS B2401-1A, P-14 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. UH-16-20-IVNM ; DWG. NO. CA-000-458; DWG. ITEM NO. 17; ASSY. NO. UH LINE FILTER (6), UH – 16 – 20 i – IVNM | EA |
| 160 | MATERIAL DESCRIPTION: O RING: NBR, JIS B2401-1 B, SIZE: G-70 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO L TO: MODEL NO. UH-16-20i-IVNM; DWG. NO. CA-000-458; DWG. ITEM NO. 18; ASSY. NO. UH LINE FILTER (6) | EA |
| 161 | MATERIAL DESCRIPTION: RING, BACK-UP: TEFLON, JIS B2407, T-3, G-110 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. UH-16-20-IVNM ; DWG. NO. CA-000-458; DWG. ITEM NO. 22; ASSY. NO. UH LINE FILTER (6), UH – 16 – 20 i – IVNM | EA |
| 162 | MATERIAL DESCRIPTION: O RING: NBR, JIS B2401 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: DWG. NO. VN-A-E; DWG. ITEM NO. 15; ASSY. NO. SUCTION FILTER ASSEMBLY | EA |
| 163 | MATERIAL DESCRIPTION: O RING: NBR, JISB2401 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO L TO: DWG. NO. VN·A·E; DWG. ITEM NO. 16; ASSY. NO. SUCTION FILTER ASSEM6L Y | EA |
| 164 | MATERIAL DESCRIPTION: O RING: NITRILE BUTADIENE RUBBER, JIS B2401 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. VN-A-E; DWG. ITEM NO. 17; ASSY. NO. SUCTION FILTER ASSEMBLY | EA |
| 165 | MATERIAL DESCRIPTION: PACKING: NBR MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: TYPE SUCTION FILTER ASSEMBLY; DWG. NO. VN-A-E; DWG. ITEM NO. 19 EQUIPMENT REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: EQUIPMENT: REXPELLER; MODEL_NO. KST-180 lC/A; PLANT LOC. | EA |
| 166 | MATERIAL DESCRIPTION: O RING: NITRILE BUTADIENE RUBBER. JIS B2401 , P·18 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO L TO: MODEL NO. VN·A·E: DWG.ITEM NO. 21: ASSY. NO. SUCTION FILTER ASSEMBLY | EA |
| 167 | MATERIAL DESCRIPTION: O RING: NITRILE BUTADIENE RUBBER, JIS B2401, G·95 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO L TO: MODEL NO.VN·24A·200W·IM: DWG. NO. B·9312·6: DWG. ITEM NO. 15 | EA |
| 168 | MATERIAL DESCRIPTION: EA 2 O RING: NBR, JIS B2401, P-14 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. VN-24A-200W-IM; DWG. NO. B-9312-6; DWG. ITEM NO. 16 ; ASSY. NO. SUCTION FILTER ASSEMBLY (2) | EA |
| 169 | MATERIAL DESCRIPTION: O RING: NITRILE BUTADIENE RUBBER. JIS B2401. G·145 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO L TO: MODEL NO. VN-24A-200W-IM; PART NO. 17; DWG. NO. B-9312-6; ASSY. NO. SUCTION FILTER ASSEMBLY | EA |
| 170 | MATERIAL DESCRIPTION: O RING: NBR, JIS B2401, G-100 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO L TO: MODEL NO. VN-24A-200W-IM; DWG. NO. B-9312-6; DWG.ITEM NO. 18 ; ASSY. NO. SUCTION FILTER ASSEMBLY (2) | EA |
| 171 | MATERIAL DESCRIPTION: PACKING: NBR, 12 MM WD, 140 X 105 MM DIA MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. VN-24A-200W-IM; DWG. NO. B-9312-6; DWG. ITEM NO. 19 ; ASSY. NO. SUCTION FILTER ASSEMBLY (2) | EA |
| 172 | MATERIAL DESCRIPTION: O RING: NBR, JIS B2401, P-18 MANUFACTURER REFERENCES: PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. VN,24A,200W-IM; DWG. NO. B,9312–6; DWG. ITEM NO. 21 ; ASSY. NO. SUCTION FILTER ASSEMBLY (2) | EA |
| 173 | MATERIAL DESCRIPTION: PIN: REAMER, PIN (2) MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG.ITEM NO. 0186-1; FIG. NO.1; ASSY. NO. THRUSTER ASSEMBLY | EA |
| 174 | MATERIAL DESCRIPTION: PIN: REAMER. HALF MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 0186-2; FIG. NO. 1; ASSY. NO. THRUSTER ASSEMBLY | EA |
| 175 | MATERIAL DESCRIPTION: PLUG: FOR PROPELLER HUB OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 187; FIG. NO. 1; ASSY. NO. THRUSTER ASSEMBLY | EA |
| 176 | MATERIAL DESCRIPTION: WIRE: LOCKING WIRE, FOR PROPELLER SHAFT OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0400; FIG. NO. 1 THRUSTER ASSEMBLY | EA |
| 177 | MATERIAL DESCRIPTION: GAUGE, PRESSURE: FOR STARBOARD MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. NO. 97020296B; DWG. ITEM NO. 33·2; ASSY. NO. HYDRAULIC UNIT | EA |
| 178 | MATERIAL DESCRIPTION: SWITCH, PRESSURE: STARBOARD APPLICATION MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. NO. 970202968; DWG. ITEM NO. 31 ; ASSY. NO. HYDRAULIC UNIT | EA |
| 179 | MATERIAL DESCRIPTION: PLATE: STEEL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 941-B; FIG. NO.4; ASSY. NO. PLATFORM ASSEMBLY·STARBOARD | EA |
| 180 | MATERIAL DESCRIPTION: DISC, CLUTCH MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 941-A; FIG. NO. 4; ASSY. NO. PLATFORM ASSEMBLY-STARBOARD | EA |
| 181 | MATERIAL DESCRIPTION: FASTENER: BLADE, FOR PORT PROPELLER MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 183; FIG. NO. 1; ASSY. NO. THRUSTER ASSEMBLY | EA |
| 182 | MATERIAL DESCRIPTION: BOSS: PROPELLER, FOR (L.T.) PORT SIDE MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 122; FIG. NO. 1; ASSY. NO. THRUSTER ASSEMBLY | EA |
| 183 | MATERIAL DESCRIPTION: PROPELLER: (R.T.) FOR STARBOARD MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 121; FIG. NO. 1; ASSY. NO. THRUSTER ASSEMBLY | EA |
| 184 | MATERIAL DESCRIPTION: ANODE: PLATE, ALUMINIUM MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 881; FIG. NO. 3; ASSY. NO. PLATFORM ASSEMBLY | EA |
| 185 | MATERIAL DESCRIPTION: ANODE: PLATE, ZINC, FOR LO COOLER MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 22-2; FIG. NO.6; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM-PORT SIDE | EA |
| 186 | MATERIAL DESCRIPTION: ANODE: PLATE, ZINC, FOR LO COOLER MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG.ITEM NO. 22-1; FIG. NO.6; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM-PORT SIDE | EA |
| 187 | MATERIAL DESCRIPTION: ANODE: PLUG, ZINC, FOR LO COOLER MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 17; FIG. NO.6; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM-PORT SIDE | EA |
| 188 | MATERIAL DESCRIPTION: O RING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG.ITEM NO. P·7·3: FIG. NO.7: ASSY. NO. PIPING ARRANGEMENT OF PLATFORM·STARBOARD SIDE | EA |
| 189 | MATERIAL DESCRIPTION: O RING MANUFACTURER REFERENCES 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: DWG.ITEM NO. P-6-3; FIG. NO. 7; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM-STARBOARD SIDE | EA |
| 190 | MATERIAL DESCRIPTION: O RING MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. D-8-2; FIG. NO.6; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM-PORT SIDE | EA |
| 191 | MATERIAL DESCRIPTION: GASKET MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG.ITEM NO. L-1-2; FIG. NO. 7; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM-STARBOARD SIDE | EA |
| 192 | MATERIAL DESCRIPTION: GASKET MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 0-9-1; FIG. NO.6; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM·PORT SIDE | EA |
| 193 | MATERIAL DESCRIPTION: GASKET MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. D-8-1; FIG. NO.6; ASSY. NO. PIPING ARRANGEMENT OF PLATFORM – PORT SIDE | EA |
| 194 | MATERIAL DESCRIPTION: PACKING: FOR CLUTCH KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES. LTD.: DWG. ITEM NO.6; FIG. NO.4: ASSY. NO. PLATFORM ASSEMBLY | EA |
| 195 | MATERIAL DESCRIPTION SEAL. OIL: FOR CLUTCH KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: DWG. ITEM NO. 5; FIG. NO.4; ASSY. NO. PLATFORM ASSEMBLY | EA |
| 196 | MATERIAL DESCRIPTION: METAL: FOR GEAR BOX OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0282; FIG. NO.2 PLATFORM ASSEMBLY | EA |
| 197 | MATERIAL DESCRIPTION: BEARING: FOR GEAR BOX OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0243; FIG. NO.2 PLATFORM ASSSEMBLY | EA |
| 198 | MATERIAL DESCRIPTION: O RING: NITRILE BUTADIENE RUBBER, JIS B2401 MANUFACTURER REFERENCES PIPL3855 TAISEIKOGYO CO LTD: MODEL NO. VN-A-E; DWG.ITEM NO. 18; ASSY. NO. SUCTION FILTER ASSEMBLY | EA |
| 199 | MATERIAL DESCRIPTION: WIRE: LOCKING, FOR PROPELLER HUB OVERHAUL KIT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.0398; DWG. ITEM NO.1; ASSY. NO. THRUSTER ASSEMBLY | EA |
| 200 | MATERIAL DESCRIPTION: O RING: FOR PROPELLER LOWER SHAFT MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO.3808; DWG. ITEM NO.1; ASSY. NO. THURSTER ASSEMBLY | EA |
| 201 | MATERIAL DESCRIPTION: LINER: SEAL MANUFACTURER REFERENCES: 901316 KAWASAKI HEAVY INDUSTRIES, LTD.: PART NO. 283; DWG. ITEM NO. 3; ASSY. NO. PLATFORM ASSEMBLY,STARBOARD | EA |
Field Marine Equipment Repair Cases
Case 1: Propeller Hub Oil Leak Repair
An offshore support vessel experienced severe hydraulic oil leakage from the Kawasaki thruster propeller hub, causing oil contamination and thruster performance loss. The root cause was a degraded 0189 O-ring and worn 0188 backup ring. Technicians replaced the faulty seals with OEM-matching components, immediately eliminating leaks and restoring full thruster thrust capacity, avoiding vessel dry-docking delays.
Case 2: Propeller Shaft Bearing Seizure
A container ship’s Kawasaki propeller shaft suffered bearing seizure during transoceanic travel, disabling the thruster. The 0250 series bearing failed due to saltwater contamination and wear. Installing a new precision 0250 bearing and accompanying shaft seal kit restored smooth rotation, allowing the vessel to resume its route without emergency port calls.
Case 3: Swivel Seal Corrosion & Leak Failure
An offshore platform’s Kawasaki swivel seal assembly developed a seawater leak, leading to internal component corrosion. Faulty 0388 series O-rings and a worn 0235-5 oil seal were the cause. Replacing the damaged seals and installing new zinc anodes prevented further corrosion, sealing the assembly and restoring full hydraulic functionality.
Frequently Asked Questions (FAQ)
| Question | Answer |
| Are these parts compatible with all Kawasaki thruster assembly models (FIG. 1/2/3)? | Yes, these spare parts are precision engineered to match OEM specifications for Kawasaki FIG. 1 thruster assemblies, FIG. 2/3 platform assemblies, and CPP feedback systems, with direct fit for 901316 series equipment. |
| What material are the O-rings made of, and are they suitable for seawater exposure? | All O-rings are constructed from NBR (nitrile butadiene rubber) certified to JIS B2401 standards, offering excellent resistance to hydraulic oil, lubricants, and seawater, making them ideal for marine thruster and platform applications. |
| Do these overhaul kits include all components needed for full shaft/seal repairs? | Yes, each overhaul kit includes all required O-rings, bearings, seals, locking wire, shims, and hardware matching OEM part lists, providing a complete solution for propeller shaft, swivel seal, and gear box overhauls. |
Procurement Guidance & Closing Statement
For marine maintenance teams, shipyard procurement specialists, and offshore platform operators seeking reliable, OEM-compatible spare parts for Kawasaki thruster, platform, and hydraulic systems, this catalog provides a fully compliant, quality-assured sourcing solution. Backed by strict marine-grade manufacturing standards and precise dimensional matching to Kawasaki OEM part numbers, these components serve as both a trusted procurement benchmark and a technical reference for resolving critical propulsion system failures. Whether stocking for routine preventive overhauls, emergency breakdown repairs, or full system refurbishments, these spare parts ensure regulatory compliance, minimize costly vessel downtime, and enhance the reliability of Kawasaki marine equipment. Secure the exact Kawasaki-compatible O-rings, bearings, seals, and hardware your marine propulsion system requires, aligned with your specific thruster/platform model and overhaul needs, to maintain uninterrupted, safe maritime operations for years to come.
