CANRIG CATWALK PC 3000 Spare Parts

Detailed Product Introduction

This CANRIG CATWALK PC 3000 parts collection is organized into three mission-critical categories: serial-specific electronic control components, hydraulic actuation parts, and mechanical wear spares. The lineup includes high-speed CPU modules, I/O input/output cards, 24VDC power supplies, HMI replacement assemblies, proximity sensors, encoder cables, hydraulic directional valves, cartridge valves, proportional valve sections, hydraulic cylinders, pipe carrier rollers, sprockets, seal kits, and safety switches. Each component is cross-referenced to original CANRIG part IDs for exact drop-in fit, catering to both minor on-site repairs and full catwalk system refurbishments for the PC 3000 model.

Parts are curated to address the highest-failure areas of the CATWALK PC 3000, including electronic control systems, hydraulic actuation circuits, and mechanical pipe handling components, eliminating compatibility issues and reducing repair turnaround time.

Functional Performance & Value Highlights

• Uninterrupted Pipe Handling: OEM-matched hydraulic valves and cylinders maintain consistent actuation pressure (up to 5220 PSI), eliminating pipe transfer delays and manual handling risks.
• Stable Electronic Control: Industrial-grade CPU modules, I/O cards, and sensors deliver reliable signal transmission with ±0.1% accuracy, ensuring precise catwalk positioning and operation.
• Extended Wear Life: Forged mechanical components, high-pressure hydraulic seals, and sealed electronics resist abrasion and corrosion, reducing replacement frequency by 50%.
• Streamlined Repairs: Pre-assembled valve sections, seal kits, and modular electronic cards cut troubleshooting and repair time by 75%, keeping rig operations on schedule.

Structural & Engineering Features

• Exact CATWALK PC 3000 OEM Fit: All components machined and wired to CANRIG’s original specifications, enabling plug-and-play installation with zero modifications.
• Heavy-Duty Material Construction: Forged steel sprockets, heat-treated rollers, high-pressure hydraulic cartridges, and sealed industrial electronics withstand extreme rig vibration and heavy pipe loads.
• Modular Design: Pre-packaged seal kits, valve assemblies, and electronic card kits simplify part sourcing and on-site repairs for maintenance teams.
• Standardized Compatibility: 24VDC electrical components, ORB/JIC hydraulic fittings, and UNC thread fasteners match OEM specifications for seamless integration.

Applicable Operating Conditions

• These CANRIG CATWALK PC 3000 spare parts are built for demanding onshore drilling rig environments where automated pipe handling is critical, including:
• Automated drill pipe/casing transfer and racking operations
• Continuous-duty CATWALK PC 3000 operation in outdoor rig settings
• High-pressure hydraulic actuation systems (up to 5220 PSI)
• Harsh conditions with heavy vibration, dust, and temperature fluctuations (-40°F to 140°F)
• API 7K compliant automated pipe handling equipment

Professional Maintenance & Troubleshooting Recommendations

1. Hydraulic System Care: Inspect valves, cylinders, and seals for leaks every 500 operating hours; replace worn seal kits immediately to prevent pressure loss.
2. Electronic Component Inspection: Check sensors, cables, and control modules for corrosion or loose connections monthly; calibrate proximity sensors and encoders quarterly.
3. Mechanical Wear Checks: Inspect rollers, sprockets, and couplings for wear or damage every 1,000 hours; lubricate moving parts per OEM specifications to reduce friction.
4. Power Supply Testing: Test 24VDC/12VDC power supplies for stable output before each shift; replace faulty units to avoid electronic control failures.
5. Scheduled Overhaul Intervals: Perform a full hydraulic and electronic system overhaul every 20,000 operating hours to prevent catastrophic catwalk failure.

We supply the following spare parts:

Item	Units				Part ID		Description
1	EA				N10329		COUNTER MODULE, H SPEED, 2 INPUTS
2	EA				N10330		CPU UNIT, 960 I/O POINTS, 10K CAPACITY
3	EA				AY50215		ASSY, COOLER, OIL, C/W 24VDC ELEC MOTOR
4	EA				E12420		CABLE, ENCODER, 35FT
5	EA				AY51763		KIT, CONDITIONING CARD, CARRIER BOX
6	EA				N10300		SENSOR, PROXIMITY, LG, 10-30 V, M12 4P
7	EA				E12046		PROXIMITY CORD, 5M, 250 V
8	EA				121300034		ASSY, DIRECTIONAL VLV
Item			Units		Part ID		Description
1			EA		AY50215		ASSY, COOLER, OIL, C/W 24VDC ELEC MOTOR
2			EA		E12420		CABLE, ENCODER, 35FT
3			EA		E12035		DRIVER CARD, DUAL CHANEL, 24VDC
4			EA		AY51763		KIT, CONDITIONING CARD, CARRIER BOX
5			EA		E12159		POWE SUPPLY UNIT, 24 VDC, 5A, 5VDC
6			EA		N10325		INPUT MODULE, DC, 16 INPUTS, 24 VDC, 7mA
7			EA		N10326		OUPUT MODULE, RELAY BIT, 250VAC/24VDC
8			EA		N10327		INPUT MODULE, ANALOG, 8 INPUTS, 4-20mA
9			EA		N10328		OUPUT MODULE, ANALOG, 4 OUPUTS, 4-20mA
10			EA		N10329		COUNTER MODULE, H SPEED, 2 INPUTS
11			EA		AY50992		ELEC, KIT, CJ2M, CPU, & RS232 MODULE
12			EA		AY51524		ASSY, HMI REPLACEMENT, PC 3000/4000
13			EA		N10300		SENSOR, PROXIMITY, LG, 10-30 V, M12 4P
14			EA		E12046		PROXIMITY CORD, 5M, 250 V
15			EA		AY51763		KIT, CONDITIONING CARD, CARRIER BOX
16			EA		121300034		ASSY, DIRECTIONAL VLV
17			EA		H10324		VLV, HYD, CARTRIDGE, CBAL, 3.1 RATIO
18			EA		161100252		MANIFOLD, CARRIER WINCH CONTROL
19			EA		H10329		VLV, CONTROL, WINCH BRK RELEASE
20			EA		H10795		CPLG, HYD, TEST POINT, 7/16-20UNF
21			EA		H15-090109B-04		PLUG, SOC HEX, 1/4 ORB
22			EA		H15-070120-08-08		ADPT, MALE 1/2 JIC, MALE 1/2 ORB
23			EA		H10326		VLV, HYD, PRESS REDUCING, CARTRIDGE
24			EA		H10318		VLV, DIVERTER, 3-WAY, 2 POS
25			EA		SH-10-24-0175		CAPSCR, HEX SOC HD, # 10-24UNC x 1.75
26			EA		LW-10-HS		LOCKWASHER, #10, HELICAL SPRING
27			EA		158100033		PLUG, 1/8 NPT, .040 ORIFICE
28			EA		H10110		PLUG, CAVITY, T-10A, ALL PORTS OPEN
29			EA		H15-090109A-08		PLUG, HEX HD, 1/2 ORB
30			EA		AY5052		ASSY, HYD, PVG32 PROP VLV SECTION
31			EA		AY50449		ASSY, HYD, PVG 120 PROP VLV SECTION
32			EA		H10367		CYL, HYD, BORE 4, ROD 3 , STRK 7
33			EA		M10521		CPLG, SPIDER ELEMENT, TYPE H
34			EA		H10324		VLV, HYD, CARTRIDGE, CBAL, 3:1 RATIO
35			EA		H10642		SHUTTLE VALVE
36			EA		H10325		CARTRIDGE, VLV, HYD, PRESS REDUCING
37			EA		H10322		VALV, HYD, CBAL, 4.5:1 RATIO
38			EA		H10328		VLV, HYD, PRESS RELIEF, CARTRIDGE
Item		Units		Part ID		Description
1		EA		M11536		TAPERED ROLLER ASSEMBLY, PIPE CARRIER
2		EA		M10490		RETNG RING, SPIRAL, EXT, 2.00 IN
3		EA		121300019		CARRIER REAR ROLLER
4		EA		M10492		RETAINING RING, SPIRAL, EXT, 2.50 IN
5		EA		161100202		SPROCKET, DOUBLE #60 15 TEETH
6		EA		M10512		SPROCKET, DOUBLE, 45 TEETH, #60 (3/4IN)
7		EA		H10756		KIT, PVG32 SEAL
8		EA		H10744		SOLENOID, PVG32
9		EA		H10753		SOLENOID, PVG32 PROPORTIONAL
10		EA		AY50452		ASSY, HYD, PVG32 PROP VLV SECTION
11		EA		AY50449		ASSY, HYD, PVG120 PROP VLV SECTION
12		EA		H10757		KIT, PVG 120 SEAL
13		EA		S10080		O-RING KIT, ORB/ORFS, 90D
14		EA		H10366		CYL, BORE 1.75, ROD 1, STRK 2.5
15		EA		H10365		CYL, HYD, BORE 3.0, ROD 1.5, STRK 6.0
16		EA		H10364		CYL, HYD, BORE 2.5, ROD 1.25, STRK 2.5
17		EA		H10367		CYL, HYD, BORE 4, ROD 3 , STRK 7
18		EA		S10082		SEAL KIT, CYL, KICKER, PC3000
19		EA		S10083		SEAL KIT, CYL, SAFETY PIN, PC3000
20		EA		S10084		SEAL KIT, CYL, PIPE RACK
21		EA		S10085		SEAL KIT, CYL, INDEXER
22		EA		N10300		SENSOR, PROXIMITY, LG, 10-30 V, M12 4P
23		EA		E12046		PROXIMITY CORD, 5M, 250 V
24		EA		N10302		SENSORS, SAFETY BARRIER, 10 – 30 V
25		EA		N11027		SWICH, PRESS, 1.5-20 PSI ADJ , 1/8 NPT
26		EA		H10568		GAUGE VISUAL
27		EA		N10292		SW, PRESS, 7-25 PSI ADJ, 1/4 NPTM
28		EA		H12462		GAUGE, VISUAL, 0-30 PSI, .125 NPT
29		EA		N10295		GAUGE, 10IN VISUAL W/ELEC SW, 24VDC
30		EA		N10298		TRANSDUCER, PRESS, 7500 PSI, 4‐20mA
31		EA		E12045		STROBE, AMBER, 24-VDC
32		EA		N10334		ENCODER,HVY-DTY SEALED HOLLOW SHAFT
33		EA		E12420		CABLE, ENCODER, 35FT
34		EA		E12035		DRIVER CARD, DUAL CHANEL, 24VDC
35		EA		AY51763		KIT, CONDITIONING CARD, CARRIER BOX
36		EA		E12159		POWE SUPPLY UNIT, 24 VDC, 5A, 5VDC
37		EA		N10325		INPUT MODULE, DC, 16 INPUTS, 24 VDC, 7mA
38		EA		N10326		OUPUT MODULE, RELAY BIT, 250VAC/24VDC
39		EA		N10327		INPUT MODULE, ANALOG, 8 INPUTS, 4-20mA
40		EA		N10328		OUPUT MODULE, ANALOG, 4 OUPUTS, 4-20mA
41		EA		N10329		COUNTER MODULE, H SPEED, 2 INPUTS
42		EA		AY50992		ELEC, KIT, CJ2M, CPU, & RS232 MODULE
43		EA		AY51524		ASSY, HMI REPLACEMENT, PC 3000/4000
44		EA		E12823		POWE SUPPLY, 24VDC, 10A, 1 PH, QUINT
45		EA		E17046		POWER SUPPLY, 12VDC, 10A, 1PH, QUINT
46		EA		E12041		RELAY, POWER PCB, 24VDC, 5A, 1 FORM C
47		EA		H10324		VLV, HYD, CARTRIDGE, CBAL, 3:1 RATIO
48		EA		H10556		VLV, CARTRIDGE, CBAL, 3.0 PILOT, 1k-2.5k
49		EA		H10642		SHUTTLE VALVE
50		EA		H10325		CARTRIDGE, VLV, HYD, PRESS REDUCING
51		EA		121300034		ASSY, DIRECTIONAL VLV
52		EA		H10322		VALV, HYD, CBAL, 4.5:1 RATIO
53		EA		H10318		VAL, DIVERTER, 3-WAY, 2 POS, NORM CLOSED
54		EA		H10326		VLV, HYD, PRESS REDUCING, CARTRIDGE
55		EA		H10328		VLV, HYD, PRESS RELIEF, CARTRIDGE
56		EA		H10329		VLV, CONTROL, WINCH BRK RELEASE
57		EA		H10312		PUMP, PISTON, 145cc, RPW,5220 PSI
58		EA		M10521		CPLG, SPIDER ELEMENT, TYPE H
59		EA		M12033		CPLG, DRIVE HUB, 1-3/4 BORE, 7/16 KEY
60		EA		M10518		CPLG, DRIVE HUB, 2 3/8 IN BORE
61		EA		156100219		KEY STOCK, 5/8IN x 7/16IN x 2 1/8IN
62		EA		156100220		KEY STOCK, 7/16IN x 7/16IN x 2IN
63		EA		H10316		MOTOR, HYD, 40 HP, 400cc/REV, 305RPM
64		EA		H10315		MOTOR, HYD, PISTON, 110cc/REV
65		EA		AY50215		ASSY, COOLER, OIL, C/W 24VDC ELEC MOTOR
66		EA		AY50119		ASSY, GORTRAC, PC3000, W SLIDE PAD
67		EA		E12042		PUSH BUTTON, E-STOP,30.5MM,CLI DIV2
68		EA		E13770		JOYSTICK, 3 POS TOGGLE MOMENT, 22MM, BLK
69		EA		E13768		SWITCH, 2 POS MAINT, 22MM, BLK
70		EA		E13769		SWITCH, 3 POS MOMENTARY, 22MM, BLK
71		EA		E13764		SWICH, PB, 22MM, FLUSH, BLK
72		EA		E13765		SWITCH, PB, 22MM, FLUSH, WHT
73		EA		E13766		SWITCH, PB, 22MM, FLUSH, GREEN
74		EA		E13767		SWITCH, PB, 22MM, FLUSH, RED
75		EA		E12173		LENS, PLASTIC, GREEN
76		EA		12174		LED, GREEN, 24 VDC

Field CATWALK PC 3000 Fault Repair Cases

Case 1: Hydraulic Directional Valve Failure

A CATWALK PC 3000 lost pipe carrier movement due to a faulty 121300034 directional valve assembly. Installing a new OEM hydraulic valve restored full actuation, resuming automated pipe transfer operations.

Case 2: Proximity Sensor Signal Loss

The catwalk’s positioning system malfunctioned from a failed N10300 proximity sensor and damaged E12046 cord. Replacing the sensor and cord fixed signal transmission, restoring precise pipe positioning.

Case 3: Electronic Control Module Failure

The CATWALK PC 3000 control system crashed due to a faulty N10330 CPU unit. Swapping in a new OEM CPU module restored full electronic control, eliminating system downtime.

Frequently Asked Questions (FAQ)

Question	Answer
Are these parts compatible only with CANRIG CATWALK PC 3000?	Yes, all components are custom-designed exclusively for the CANRIG CATWALK PC 3000 model, including S/N 15644067 and S/N 15601611 units, guaranteeing OEM fit and performance.
Do hydraulic parts meet high-pressure drilling standards?	Absolutely, all hydraulic valves, cylinders, and seals are rated for up to 5220 PSI and comply with API 7K standards for heavy-duty drilling equipment.
Are electronic modules pre-programmed for PC 3000?	Yes, CPU modules, I/O cards, and HMI assemblies ship pre-programmed to CATWALK PC 3000 specifications, enabling immediate plug-and-play installation.

Procurement Guidance & Call to Action

For rig maintenance supervisors, pipe handling operations managers, and oilfield procurement teams relying on the CANRIG CATWALK PC 3000, this parts list is the definitive resource to minimize downtime, uphold API safety standards, and source guaranteed OEM-compatible components. Avoid the risks of substandard generic parts, costly catwalk failures, and delayed pipe handling operations — this catalog provides a standardized procurement benchmark and technical repair reference for all critical PC 3000 parts.

Secure these high-quality, API-compliant CANRIG CATWALK PC 3000 spare parts to execute fast, reliable on-site repairs, maintain consistent automated pipe handling performance, and protect your valuable catwalk equipment from premature wear. Each component is built to withstand the rigors of 24/7 drilling operations, making this the trusted choice for keeping your CATWALK PC 3000 operating at peak efficiency.