Core Product Overview
This comprehensive lineup of shale shaker replacement parts is engineered exclusively for Derrick FLC504/FLC503, MI SWACO Mongoose/Mongoose Pro, and NOV Brandt VSM-300/King Cobra series shale shakers—industry-leading solids control equipment deployed in oil and gas drilling, directional drilling, and mud circulation systems. Targeted at drilling maintenance teams, solids control specialists, and rig procurement managers, these parts address critical pain points: premature component wear, screen tensioning failures, motor malfunctions, and unplanned rig downtime that disrupts drilling efficiency and drives up operational costs.
Functional Classifications
- Screen Tensioning & Clamping Components: Fixed/adjustable side fingers, locking bolts, wedge clamps, and tension wrenches designed for precise screen alignment; eliminates screen slippage and uneven wear, critical for maintaining consistent solids separation.
- Vibratory Motor & Power Components: OEM-grade vibrating motors (2.5HP–5.5KW), motor kits, contactors, relays, and thermal protection devices; engineered for 440–480V/380–415V, 50/60HZ operation, with IP56/IP65 ingress protection for hazardous drilling environments.
- Sealing & Cushioning Parts: High-temp rubber cushions, VITON seal bars, O-rings, and gasket kits; resists oil-based mud, chemical corrosion, and temperatures ranging from -50°C to 120°C, preventing fluid bypass and contamination.
- Structural & Assembly Components: Screen beds, basket assemblies, weldments, support brackets, and isolation springs; engineered for heavy-duty vibratory loads, reducing equipment vibration transfer and structural fatigue.
- Maintenance & Repair Kits: Bearing kits, rework kits, repair plugs, and specialized tools; streamline on-rig repairs, reduce inventory overhead, and enable quick troubleshooting for common shaker failures.
- Hardware & Fastening Parts: Grade 8/10.9 hex bolts, lock nuts, NORD-LOCK washers, and self-piercing screws; corrosion-resistant (stainless steel 304/316, yellow chromate) for secure, long-lasting assembly.
Structural Characteristics
All parts feature precision CNC machining and strict dimensional tolerance control (±0.005 inches) for perfect OEM fitment, eliminating modification or retrofitting during installation. Load-bearing components (support assemblies, motor brackets) are stress-tested to withstand 2070 RPM vibratory frequencies and heavy mud loads, while elastomeric parts are formulated for tear resistance and extended service intervals. Modular design allows for individual component replacement instead of full assembly overhauls, cutting repair costs and labor time by up to 50%.
Applicable Operating Conditions
- Onshore/offshore oil and gas drilling rigs, directional drilling sites, and solids control systems
- Compatible with water-based mud (WBM), oil-based mud (OBM), and synthetic-based mud (SBM) systems
- Operating temperature range: -50°C to +120°C, suitable for arctic, desert, and tropical drilling environments
- ATEX/IECEX certified components available for hazardous explosive drilling locations
- Designed for continuous duty cycles (S1 rating) and high-frequency vibratory operation
Maintenance & Service Recommendations
To maximize component lifespan and equipment reliability, follow these industry-standard maintenance protocols:
- Routine Inspection (Every 250 Operating Hours): Check screen tension hardware, motor mounting bolts, and seal integrity; tighten loose fasteners to OEM torque specifications (380 FT-LB for King Cobra heavy hex nuts).
- Lubrication Schedule: Grease vibrator motor bearings with ISO 100 synthetic grease or Kluber ISOFLEX TOPAS NB 52 every 500 hours; use 400g cartridge lubricants for consistent bearing protection.
- Wear Part Replacement: Replace rubber cushions, seal bars, and screen plugs at the first sign of cracking or compression set; swap worn tension fingers and clamps to avoid screen damage.
- Motor Care: Monitor motor amperage (5.6A max for VSM-300 motors) and vibration levels; replace thermal overload relays and contactors every 12 months to prevent electrical failures.
- Storage Guidelines: Store spare parts in a dry, dust-free environment; protect elastomeric components from UV exposure and chemical contamination to preserve material properties.
Frequently Asked Questions (FAQ)
| Question | Answer |
| Are these parts fully compatible with OEM Derrick FLC504 and MI SWACO Mongoose shakers? | Yes, all parts are manufactured to exact OEM dimensional and material specifications, ensuring direct drop-in fitment for FLC504, Mongoose/Mongoose Pro, and VSM-300 shakers without modifications. |
| What materials are used for high-wear screen tensioning components? | Critical tensioning parts (side fingers, bolts) use 17-4PH stainless steel for corrosion resistance and durability; elastomeric seals and cushions use nitrile rubber/high-temp polyurethane for mud and chemical resistance. |
| Can these parts be used for both routine maintenance and emergency repairs? | Absolutely. The lineup includes everyday wear parts, critical spare kits, and specialized repair tools to support scheduled maintenance and resolve unexpected shaker failures quickly on-site. |
We supply the following spare parts:
| Material Description | Material Long Text | |
| 1 | FINGERS,FIXED SIDE,P/N 14612-01,F/SHAKER | FINGERS, FIXED SIDE, P/N 14612-01, FOR SHALE SHAKER-UNDER SCREEN TENSIONING, MAKE: DERRICK, MODEL: FLC504, 17-4PH SST |
| 2 | FINGERS,ADJ SIDE,P/N 14611-01,F/SHAKER | FINGERS, ADJ SIDE, P/N 14611-01, FOR SHALE SHAKER-UNDER SCREEN TENSIONING, MAKE: DERRICK, MODEL: FLC504, 17-4PH SST |
| 3 | LOCK BOLT SCREEN SHALE SHAKER | LOCK BOLT SCREEN SHALE SHAKER |
| 4 | GAS MONGOOSE SCREEN, IT NO 11,SWACO | GASKET MONGOOSE SCREEN, IT NO 11, FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 5837001 |
| 5 | WEDGE SCREEN CLAMPING, MONGOOSE | WEDGE SCREEN CLAMPING FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 5895001 |
| 6 | WELDMENT, SCREEN BAR, MONGOOSE | WELDMENT, SCREEN BAR FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9671640 |
| 7 | REWORK KIT, BASKET SCREEN BED, SWACO | REWORK KIT, BASKET SCREEN BED ASSEMBLY FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9874600 |
| 8 | SCREEN BED 1, MONGOOSE, MI SWACO | SCREEN BED 1 FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9874605 |
| 9 | SCREEN BED 3, MONGOOSE, MI SWACO | SCREEN BED 3 FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9874607 |
| 10 | SCREEN BED 4, MONGOOSE, MI SWACO | SCREEN BED 4 FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9874608 |
| 11 | SCREEN PLUGVSM-300, MAKE – BRANDT | SCREEN PLUG FOR SHALE SHAKER SCREEN, MODEL VSM – 300, MAKE – BRANDT, OLD P/N: AWC-2, P/N: MISC-AWC2 |
| 12 | PRIMARY SCREEN REAR SEAL BAR, F/ SHAKER | PRIMARY SCREEN REAR SEAL BAR, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/02/014 |
| 13 | UPPER DECK SCALPING SCREEN | UPPER DECK SCALPING SCREEN, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 63727FMSD040 |
| 14 | HIGH TEMP. SCREEN CUSHION F/ RUBBER | HIGH TEMP. SCREEN CUSHION F/ RUBBER, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 26FI |
| 15 | REPAIR TOOL, SCREEN, SHALE SHAKER, AX-1 | REPAIR TOOL, SCREEN, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0336 |
| 16 | HOOK,SCREEN WITHRAWAL,SHALE SHAKER,AX-1 | HOOK, SCREEN WITHRAWAL, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/3018 |
| 17 | REPAIR PLUG,SCREEN-BOX OF100,SHALESHAKER | REPAIR PLUG, SCREEN – BOX OF 100, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0268-100 |
| 18 | CARRIER ASSY, SECON. SCREEN,SHALE SHAKER | CARRIER ASSY, SECONDARY SCREEN, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: 300/02/007 |
| 19 | UPI RUBBER PLUG, MONGOOSE SCREEN, SHAKER | UPI RUBBER PLUG, FOR MONGOOSE SCREEN, FOR SHALE SHAKER, MODEL: MONGOOSE – PRO /967530-04IT, MAKE: MI SWACO, P/N: UPIMGPLUG |
| 20 | PLUG, UPI RUBBER,VSM300 COMPOSITE SCREEN | PLUG, UPI RUBBER, FOR COMPOSITE SCREEN, FOR NOV SHALE SHAKER, MODEL: VSM 300, MAKE: UPI, P/N: UPIVSMPLUG |
| 21 | END CAP, SHALE SHAKER SCREEN, 300/01/003 | END CAP, FOR SHALE SHAKER SCREEN, MODEL: VSM300, MAKE: NOV, P/N: 300/01/003 |
| 22 | SEAL HOUSING, SHALE SHAKER, 300/01/004 | SEAL HOUSING, FOR SHALE SHAKER SCREEN, MODEL: VSM300, MAKE: NOV, P/N: 300/01/004 |
| 23 | MOTOR, MONGOOSE SHALE SHAKER, EM3C00010 | MOTOR FOR MONGOOSE SHALE SHAKER 380/415V, 50 HZ MAKE – MI SWACO P/N – EM3C00010 CDX P/N – CDX18-5900 |
| 24 | SHALE SHAKER MOTOR, BRANDT,VSM300,2.68KW | MOTOR, SHALE SHAKER, TYPE: W-EF132MS-H, 2.68 KW, 3 PH, 460 V, 5.6 A MAX, 50-70 HZ, 1480–2070 RPM, DUTY: S1 INV C KW, INSULATION CLASS: F, AMB. TEMP. + 55C, IP 56, BEARING: DE 63082RSC3, NDE 62102RSC3, MAKE: BROOK CROMPTON, P/N: 132E000673, FOR BRANDT MODEL: VSM300 |
| 25 | ELE MOTOR, 5.5KW, SHALE SHAKER,QUAD AX-1 | ELECTRIC MOTOR, 5.5KW, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: EL-M56-FM-46060 |
| 26 | MOTOR KIT, 2.5HP, FIXED WEIGHT, 440-480V | MOTOR KIT, 2.5 HP, FIXED WEIGHT, 440-480V, 70 FRAME, 60 HZ, WITH MOUNTING HARDWARE, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 9870525 |
| 27 | MOTOR KIT, 2.5HP, SWING WEIGHT, 440-480V | MOTOR KIT, 2.5 HP, SWING WEIGHT, 440-480V, 70 FRAME, 60 HZ, WITH MOUNTING HARDWARE, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 9870528 |
| 28 | MUD CLEANER, MONGOOSE PRO, 212/6T4 | MUD CLEANER, MONGOOSE PRO, 212/6T4, P/N: 9675360-04, 2 (2.5HP) MOTOR 440-480V, 60 HZ, 3PH, 1800 RPM, ATEX/IECEX EXD IIB 160 DEG C, IP65, TWELVE (SIX TWIN) REPLACEABLE 4″ TWIN D-SLITER CONES (MODEL: 6T4) CAPABLE OF UPTO 900 GPM AND TWO REPLACEBLE 12″ D-SANDER CONE (MODEL 2- 12) CAPABLE OF UPTO 1000 GPM, MOUNTED ABOVE A MONGOOSE PRO SHALE SHAKER WITH BYPASS BETWEEN INDEPENDENTLY OPERATED SHAKER, D-SILTER, AND D- SANDER |
| 29 | BASKET ASSY, SHALE SHAKER, VSM 300, NOV | BASKET ASSY, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: 300/02/001 |
| 30 | MOTOR, VIBRATING, 460/480V, 60HZ, 3PH | MOTOR, VIBRATING, RATING: 460/480V, 60HZ, 3PH, 1800 RPM, FOR SHALE SHAKER, MODEL: FLC-504, DWG. NO: 15984, P/L NO: 16013-00, MAKE: DERRICK CORPORATION, P/N: SGX-38-18-460/480-6-014 |
| 31 | KIT, MOTOR 2.5 HP, FIXED, SHALE SHAKER | KIT, MOTOR 2.5 HP, FIXED WT, 220-240/380-415V 70 FRAME, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 9870526 |
| 32 | PAINT ORANGE-436 PILOT2(STD PKG-5LTR) | PAINT ORANGE-436 PILOT 2 (5 LTR PACKING) F/ SHALE SHAKER, JOTUN, P/N: D01-P31 |
| 33 | BUTTERFLY VALVE,10″SHALE SHAKER,VSM 300 | BUTTERFLY VALVE, SIZE: 10″ FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV-BRANDT, VALVE MAKE: TOMOE, P/N: 001-431-055 |
| 34 | FLOAT MOUNT ASSY,P/N 1129-00,F/SHAKER | FLOAT MOUNT ASSEMBLY, P/N 1129-00, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, 4″X3″ |
| 35 | SUPPORT ASSY,P/N 16710-03,F/SHALE SHAKER | SUPPORT ASSEMBLY, P/N 16710-03, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, CROSS-.250X.750X40.500 |
| 36 | HEATER ELEMENT,P/N SQD-B7.70,F/SHAKER | HEATER ELEMENT, P/N SQD-B7.70, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504 |
| 37 | PROTECTOR,STGR,P/N 3660-05-30,F/SHAKER | PROTECTOR, STRINGER-26″, P/N 3660-05-30, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, NO NCH NITL |
| 38 | PUSH BUTTON,P/N SQD-2510-MC03,F/SHAKER | PUSH BUTTON, P/N SQD-2510-MC03, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, MANUAL STARTER ONLY |
| 39 | BOLT ASSY,P/N G0008680,F/SHALE SHAKER | BOLT ASSEMBLY, P/N G0008680, FOR SHALE SHAKER-UNDERSIDE TENSIONING-FLC500, MAKE: DERRICK, MODEL: FLC504 |
| 40 | SUPPORT ASSY,P/N 16710-01,F/SHALE SHAKER | SUPPORT ASSEMBLY, P/N 16710-01, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, SIDE-.250X.750X27.375 |
| 41 | WRENCH ASSY, P/N 14734-01,F/SHALE SHAKER | WRENCH ASSEMBLY, P/N 14734-01, FOR SHALE SHAKER-TENSIONING-500 SERIES, MAKE: DERRICK, MODEL: FLC504 |
| 42 | GREASE, VIBRATOR SHC-100, 10-OZ TUBE | GREASE, VIBRATOR SHC-100, 10-OZ TUBE, FOR SHALE SHAKER VIBRATOR MOTOR, MODEL: SGX-38-18-460/480-6-001, MAKE: DERRICK, P/N: G0002250 |
| 43 | GREASE,BEARING KLUBER,400G, SHALE SHAKER | GREASE, BEARING KLUBER, ISOFLEX TOPAS, NB 52, CARTRIDGE: 400 G, TEMP: -50-120 DEG C, FOR SHALE SHAKER, MODEL: CDX18-5900, MAKE: AL SWACO, P/N: 2863029 |
| 44 | RUBBER MULTIPLEX SPRING, F/ SHALE SHAKE | RUBBER MULTIPLEX SPRING, FOR SHALE SHAKER (CHINESE), MODEL CQ-2L, P/N: # MR 120. |
| 45 | RUBBER VIBRATION ISOLATING STRIP | RUBBER VIBRATION ISOLATING STRIP, FOR SHALE SHAKER (CHINESE), MODEL CQ- 2L, P/N# L-650 |
| 46 | BRG, KING COBRA II, BRANDT | BEARING FOR SHALE SHAKER MOTORS MAKE BRANDT MODEL KING COBRA II, P/N: NJ2312 ET VP C3 |
| 47 | CONTACTOR, KING COBRA II, BRANDT | ALLEN BRADLEY CONTACTOR, COIL VOLT 480V 60HZ, FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 100-C23- -10-C |
| 48 | HARDENED THICK WSH, KING COBRA II | HARDENED THICK WASHER FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: LC2A14014 |
| 49 | 12-POINT 3/4 10UNC X 4 1/2, KING COBRA | 12-POINT 3/4 10UNC X 4 1/2???? FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 22AAL |
| 50 | LOCTITE PRODUCT 243, KING COBRA II | LOCTITE PRODUCT 243 (HEAVY COAT) FOR SHALE SHAKER MODEL KING COBRA II, MAKE -BRANDT, P/N: 18N |
| 51 | WSH, KING COBRA II, BRANDT | WASHER FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 36AR |
| 52 | HEAVY HEX JAM NUT, KING COBRA II, BRANDT | HEAVY HEX JAM NUT FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 35EA |
| 53 | HEAVY HEX NUT, KING COBRA II, BRANDT | HEAVY HEX NUT, TORQUED TO 380 FT-LB (515 N.M) FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 35DZ |
| 54 | SPOOL SPRING (BACK SPRING), KING COBRA | SPOOL SPRING (BACK SPRING)FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: LF3C10426 |
| 55 | FRONT SPRING, KING COBRA II, BRANDT | FRONT SPRING FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: LF3B00936 |
| 56 | COVER FOR ROD, MONGOOSE, MI SWACO | COVER FOR ROD FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 58- 06-771 |
| 57 | JACK WITH TOP PLATE, MONGOOSE, MI | JACK WITH TOP PLATE, ACTION JACK FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 58-53-009 |
| 58 | RUBBER DECK FOAM, NEOPRENE, MI SWACO | RUBBER DECK FOAM RUBBER NEOPRENE (66FT/BOX) FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 58-71-650 |
| 59 | SPRING COIL 7″, MONGOOSE, MI SWACO | SPRING COIL 7 ” FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N- 9360007 |
| 60 | BOOT SPRING 4.83X4.78 X 6.25 MI SWACO | BOOT SPRING 4.83 OD X 4.78 ID X 6.25 NITRITE FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N- 5804004 |
| 61 | JACK ASSY LIFTING DECK, MONGOOSE,SWACO | JACK ASSY LIFTING DECK, MANUAL DECK ANGLE ADJST FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N 9671681 |
| 62 | WSH SPRING ISOLATION, MONGOOSE | WASHER SPRING ISOLATION HIGH GRADE NITRILE, FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 5895002 |
| 63 | GROMMET SCREW .273 SQ , MONGOOSE | GROMMET SCREW .273 SQ PANEL HOLE PANEL THICK .031-.156 SHALE SHAKER MODEL MONGOOSE, MI SWACO, P/N: 07-415 |
| 64 | SCREW FLAT HEAD CRSK 8-32 X 1″ SWACO | SCREW FLAT HEAD CRSK 8-32 X 1″ 304 S/STEEL SQ DRIVE FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 1441471 |
| 65 | REPAIR CLIPS, MONGOOSE, MI SWACO | REPAIR CLIPS FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9672223 |
| 66 | SELF PIERCING SCREW, MONGOOSE | SELF PIERCING SCREW FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 04-1511 |
| 67 | PLATE RIGHT INDICATOR, MONGOOSE | PLATE RIGHT INDICATOR FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9671744 |
| 68 | PLATE LEFT INDICATOR MONGOOSE, SWACO | PLATE LEFT INDICATOR FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9671745 |
| 69 | HHCS M12 x 45MM MONGOOSE SWACO | HHCS M12 x 45MM LONG FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 04-1270 |
| 70 | HEX NUT M12 , MONGOOSE, MI SWACO | HEX NUT M12 FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 03-415 |
| 71 | FLAT WSH M12 REG , MONGOOSE | FLAT WASHER M12 REG FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 05-305 |
| 72 | LOCK WSH M12 REG , MONGOOSE | LOCK WASHER M12 REG FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 05-306 |
| 73 | MOTOR 0.6HP, 230/460 V, 60 Hz MI SWACO | MOTOR 0.6HP, 230/460 V, 60 Hz FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 6912002 |
| 74 | HEX HEAD CAP SCREW, M20-2.5 X 70MM LONG | HEX HEAD CAP SCREW, M20-2.5 X 70MM LONG, F/ SHALE SHAKER, MDL: MONGOOSE, MAKE: MISWACO, P/N: 04-1629 |
| 75 | WEIGHT COVER, F/ SHALE SHAKER, MI SWACO | WEIGHT COVER, FOR SHALE SHAKER MODEL: MONGOOSE, MAKE : MI SWACO, MODEL: CDX18-5900, P/N: 517349 |
| 76 | WEIGHT COVER ORING, F/ SHALE SHAKER MOD | WEIGHT COVER ORING, FOR SHALE SHAKER MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 508619 |
| 77 | SCREW, SHC, M8 X 25, F/ SHALE SHAKER | SCREW SHC, M8 X 25 FOR SHALE SHAKER MDL: MONGOOSE CDX18-5900, MI SWACO, P/N: 515508 |
| 78 | WASHER, SCHNORR D8, F/ SHALE SHAKER | WASHER, SCHNORR D8, FOR SHALE SHAKER MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 513004 |
| 79 | SCREW, F/ SHALE SHAKER, MDL: MONGOOSE | SCREW, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 515505 (FIG8B, MODEL: CDX18-2100 ) |
| 80 | LOCK NUT CONDUIT,3/4″,NPT,F/SHALE SHAKER | LOCK NUT CONDUIT, 3/4″, NPT, F/ SHALE SHAKER MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-184 |
| 81 | SCREW, F/ SHALE SHAKER, MDL: MONGOOSE | SCREW, FOR SHALE SHAKER, MDL: MONGOOSE (CDX18-2100 (601149), MI SWACO, P/N: 515509 (FRAME 88.30) |
| 82 | O-RING, FOR SHALE SHAKER, MDL: MONGOOSE | O-RING, FOR SHALE SHAKER, MDL: MONGOOSE CDX18-2100, 601149, MAKE: MI SWACO, P/N: 508620, FRAME 88.30 |
| 83 | HEXA HEAD CAP SCREW,M12X30 LONG,MI SWACO | HEXA HEAD CAP SCREW, M12X30 LONG, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 04-1157 |
| 84 | POP RIVET 1/8″, F/ SHALE SHAKER,MI SWACO | POP RIVET 1/8″, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 07-409 |
| 85 | MS WELD FLANGE COVER, 10″ | MS WELD FLANGE COVER, 10″, FOR SHALE SHAKER, MODEL: MONGOOSE, MI SWACO, P/N: 9671652-01 |
| 86 | RING GASKET, ANSI FLANGE RF, 150LB, 10″ | RING GASKET, ANSI FLANGE RF, 150LB, 10″ ,F/ SHALE SHAKER, MDL: MONGOOSE, MAKE: MI SWACO, P/N:3916067 |
| 87 | BASKET ASSY, F/ SHALE SHAKER, MDL | BASKET ASSEMBLY, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671738-01 |
| 88 | WELDMENT HEADER BOX, F/ SHALE SHAKER | WELDMENT HEADER BOX, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671810 |
| 89 | GATE SKID SLIDE, FOR SHALE SHAKER | GATE SKID SLIDE, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671779 |
| 90 | SHIPPING BRACKET, F/ SHALE SHAKER, SWACO | SHIPPING BRACKET, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671742 |
| 91 | FLAT WASHER, M20, FOR SHALE SHAKER | FLAT WASHER, M20, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 05-296 |
| 92 | LOCKWASHER, M20, FOR SHALE SHAKER | LOCKWASHER, M20, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 05-307 |
| 93 | SPRING SPOOL WELDMENT, FOR SHALE SHAKER | SPRING SPOOL WELDMENT, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671679 |
| 94 | INDICATOR POINTER, FOR SHALE SHAKER | INDICATOR POINTER, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671683 |
| 95 | LOCKWASHER, M24, FOR SHALE SHAKER | LOCKWASHER, M24, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 05-309 |
| 96 | BOOT SPRING, F/ SHALE SHAKER,MI SWACO | BOOT SPRING, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 5804004 |
| 97 | I/0 PLUG COVER, 6 DIA, NITRILE | I/0 PLUG COVER, 6 DIA, NITRILE, FOR SHALE SHAKER, MODEL: MONGOOSE, MI SWACO, P/N: S48K00827-NL |
| 98 | HEX NUT, M24, FOR SHALE SHAKER | HEX NUT, M24, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 03-412 |
| 99 | FLATWASHER, M24, FOR SHALE SHAKER | FLATWASHER, M24, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 05-308 |
| 100 | TIMER, INPUT 110-120 VAC,F/ SHALE SHAKER | TIMER, INPUT 110-120 VAC, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: GT3F-1AF.20 |
| 101 | O/LOAD RELAY , 5-10 A, FOR SHALE SHAKER | O/LOAD RELAY , 5-10 A, FOR SHALE SHAKER, MDL: MONGOOSE, MAKE: MI SWACO, P/N: 193-TAC10 |
| 102 | HEX NUT, M16-1.5, YELLOW CHROMATE | HEX NUT, M16-1.5, YELLOW CHROMATE, FOR SHALE SHAKER, MDL: MANGOOSE, MAKE: MI SWACO, P/N: 1305040 |
| 103 | LOCK WASHER, SCHNORR, F/ SHALE SHAKERS | LOCK WASHER, SCHNORR, M20, FOR SHALE SHAKER, MDL: MANGOOSE, MI SWACO, P/N: 05-244 |
| 104 | MOTOR WASHER, FOR SHALE SHAKER | MOTOR WASHER, FOR SHALE SHAKER, MODEL: MANGOOSE, MAKE: MI SWACO, P/N: BM6S20043-01 |
| 105 | WASHER, 16 MM MOTOR, F/ SHALE SHAKER | WASHER, 16 MM MOTOR, FOR SHALE SHAKER, MODEL: MANGOOSE, MAKE: MI SWACO, P/N: 9671682 |
| 106 | LOCKWASHER SCHNORR, M16, F/SHALE SHAKER | LOCKWASHER SCHNORR, M16, FOR SHALE SHAKER, MODEL: MANGOOSE, MAKE: MI SWACO, P/N: 05-248 |
| 107 | CHANNEL RUBBER, DERRRICK SHALE SHAKER | CHANNEL RUBBER- FOR DERRRICK SHALE SHAKER, P/N: G0003402 |
| 108 | MOTOR, VSM-300, NOV BRANDT | MOTOR (2.68KW DOUBLE SHAFTED TENV MOTOR) FOR SHALE SHAKER, MODEL VSM- 300, MAKE NOV BRANDT, P/N: 300/01/033 |
| 109 | MAIN BRG, VSM-300, NOV BRANDT | MAIN BEARING FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/1/011 |
| 110 | PRIMARY SEAL PNEUMOSEAL, VSM-300, NOV | PRIMARY SEAL PNEUMOSEAL FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/02/009 |
| 111 | SECONDARY SEAL PNEUMOSEAL, VSM-300 | SECONDARY SEAL PNEUMOSEAL FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/02/010 |
| 112 | MOTOR SHAFT CPLG, VSM-300, NOV | MOTOR SHAFT COUPLING FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/018 |
| 113 | O RINGS, VSM-300, NOV BRANDT | O-RINGS FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/013 |
| 114 | EXT CIRCLIPS, VSM-300, NOV BRANDT | EXTERNAL CIRCLIPS FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/014 |
| 115 | SHAFT SEAL, VSM-300, NOV BRANDT | SHAFT SEAL FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/012 |
| 116 | V- RINGS, VSM-300, NOV BRANDT | V- RINGS FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/015 |
| 117 | M.16 NORD- LOCK WSH, VSM-300, NOV | M.16 NORD- LOCK WASHER (PAIR) FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: SS NLW M16 |
| 118 | M.20 NORD- LOCK WSH, VSM-300, NOV | M.20 NORD- LOCK WASHER (PAIR) FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: SS NLW M20 |
| 119 | 400GM CART GREASE, VSM-300, NOV | 400GM CARTRIDGE GREASE FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/06/003 |
| 120 | THERMISTOR RELAY, VSM-300, NOV BRANDT | THERMISTOR RELAY FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/004 |
| 121 | OVERLOAD 6-9 AMP, VSM-300, NOV BRANDT | OVERLOAD 6-9 AMP FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/006 |
| 122 | CONTACTOR 7.5 KW, VSM-300, NOV BRANDT | CONTACTOR 7.5 KW FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/005 |
| 123 | PRIMARY FUSE, VSM-300, NOV BRANDT | PRIMARY FUSE FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/010 |
| 124 | SECONDARY FUSE, VSM-300, NOV BRANDT | SECONDARY FUSE FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/012 |
| 125 | RELAY, VSM-300, NOV BRANDT | RELAY FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/037 |
| 126 | MAIN BRGVSM 300, MAKE : BRANDT | MAIN BEARING FOR SHALE SHAKER, MODEL VSM 300, MAKE : BRANDT, P/N: 300/01/011 |
| 127 | MOUNTING SPRING PAD VSM-300, BRANDT | MOUNTING SPRING PAD FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, OLD P/N: 300/05/004, P/N: 17780959-001 |
| 128 | 3 WAY VLV VSM-300, MAKE: BRANDT | 3 WAY VALVE FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: 300/04/005 |
| 129 | NON RETURN VLV VSM-300, BRANDT | NON RETURN VALVE FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: 300/04/006 |
| 130 | MOUNTING SPRING VSM-300, BRANDT | MOUNTING SPRING FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: 300/05/003 |
| 131 | COUPLING ASSY, FOR SHALE SHAKER, BRANT | COUPLING ASSY, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/01/19 |
| 132 | ELECTRIC MOTOR, FOR SHALE SHAKER, BRANDT | ELECTRIC MOTOR, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/01/017 |
| 133 | VITON STRIP SEAL BAR, FOR SHALE SHAKER | VITON STRIP SEAL BAR, FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: 300/02/015 |
| 134 | EMERGENCY STOP STATION, FOR SHALE SHAKER | EMERGENCY STOP STATION, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/089 |
| 135 | FAULT INDICATOR LIGHT (RED), BRANDT | FAULT INDICATOR LIGHT (RED), FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/018 |
| 136 | RESET PUSH BOTTON, F/ SHALE SHAKER | RESET PUSH BOTTON, FOR SHALE SHAKER, MDL: VSM – 300, BRANDT, P/N: 300/03/016 ( DOCUMENT NO 314-013) |
| 137 | AMMETER, F/ SHALE SHAKER, MDL: VSM | AMMETER, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/014 (DOCUMENT NO 314-013) |
| 138 | ISOLATOR SWITCH FOR SHALE SHAKER | ISOLATOR SWITCH FOR SHALE SHAKER, MDL: VSM – 300, BRANDT, P/N: 300/03/049A ( DOCUMENT NO 314-013 |
| 139 | SECONDARY TX CIRCUIT BREAKER, F/ SHALE | SECONDARY TX CIRCUIT BREAKER, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/075 |
| 140 | TRANSF/MER, F/ SHALE SHAKER | TRANSFORMER, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/036 |
| 141 | CONTACTOR, 7.5 KW, F/ SHALE SHAKER | CONTRACTOR, 7.5 KW, FOR SHALE SHAKER, MODEL: VSM – 300, BRANDT, P/N: 300/03/005A |
| 142 | CHOKE UNIT, 2.5 MH, F/SHALE SHAKER | CHOKE UNIT, 2.5 MH, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/065 |
| 143 | INVERTER, 11KW, FOR SHALE SHAKER | INVERTER, 11KW, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/070 |
| 144 | NORD-LOCK WASHER-M12, FOR SHALE SHAKER | NORD-LOCK WASHER-M12, FOR SHALE SHAKER, MDL: VSM – 300, MAKE: BRANDT, OLD P/N: SSNLW M12, P/N: 001-09B-112 |
| 145 | PNEUMATIC CONTROL PANEL, F/ SHALE SHAKER | PNEUMATIC CONTROL PANEL, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/04/001 |
| 146 | ISOFLEX TOPAS GREASE, COMMON SPARES | ISOFLEX TOPAS GREASE FOR CENTRIFUGAL PUMP <(>&<)> SHALE SHAKER, MODEL: NB 52 |
| 147 | FRONT SPRING MOUNT BRACKET ASSY,VSM-300 | FRONT SPRING MOUNT BRACKET ASSY,VSM-300FOR SHALE SHAKER,MAKE:NOV BRANDTMODEL:VSM-300, P/N: 300-02-002 |
| 148 | REAR SPRING MOUNT BRACKET ASSY,VSM-300 | REAR SPRING MOUNT BRACKET ASSY,VSM-300FOR SHALE SHAKER,MAKE:NOV BRANDTMODEL:VSM-300, P/N: 300-02-004 |
| 149 | GLAND,CABLE,CORD GRIP,3/4″,SHAKER MOTOR | GLAND, CABLE, CORD GRIP, 3/4″NPT, FOR MANGOOSE PLATFORM SHALE SHAKER MOTOR POWER CABLE, P/N: 01-1888 |
| 150 | CABLE ELEC,14/4 STD EXANE,ARMORED/JACKET | CABLE ELEC, 14/4 STANDARD EXANE, ARMORED/JACKETED, FOR MANGOOSE PLATFORM SHALE SHAKER MOTOR, P/N: 7906231 |
| 151 | CLAMP, SS 3 HOSE, 2 HALVES MAKE 1 CLAMP | CLAMP, STAINLESS STEEL 3 HOSE, 2 HALVES MAKE 1 CLAMP FOR SHALE SHAKER POWER CABLE, P/N: 00-1665 |
| 152 | ELBOW,CONDUIT,EP 90D, 3/4 MPT X 3/4 FPT | ELBOW, CONDUIT, EP 90D, 3/4 MPT X 3/4 FPT, FOR SHALE SHAKER MOTOR TERMINAL BOX, P/N: 5030937 |
| 153 | CABLE, 14GA, 4 COND, SHALE SHAKER | CABLE, 14GA, 4 CONDUCTOR, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 01-1688 |
| 154 | GLAND, CABLE, 3/4″ NPT, SHALE SHAKER | GLAND, CABLE, 3/4″ NPT, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 01-1904 |
| 155 | SHROUD, RUBBER, SHALE SHAKER, KING COBRA | SHROUD, RUBBER, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 01-1903 |
| 156 | CLAMP, CABLE, SHALE SHAKER, KING COBRA | CLAMP, CABLE, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 01-1902 |
| 157 | CORD GRIP, SHALE SHAKER,KING COBRA, NOV | CORD GRIP, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 41F |
| 158 | GAUGE,PRES,0-100PSI,SHALE SHAKER,VSM300 | GAUGE, PRESSURE, 0-100PSI, FOR SHALE SHAKERS, MODEL: VSM 300, MAKE: BRANDT, OLD P/N: 300/04/004, P/N: P4A0052372 |
| 159 | MOTOR,2HP,230/460 V,60 Hz,SHALE SHAKER | MOTOR, 2 HP, 230/460 V, 60 Hz FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, ( FIG: 34 PART LIST FOR 9671740-11), P/N: EM3C00011 |
| 160 | BRACKET, SHIPPING, FRONT,SHALE SHAKER | BRACKET, SHIPPING, FRONT, FOR SHALE SHAKER, MODEL: VSM-300, ,MAKE: NOV BRANDT, P/N: CPSB3/4X370 |
| 161 | BRACKET, SHIPPING, REAR,SHALE SHAKER | BRACKET, SHIPPING, REAR, FOR SHALE SHAKER, MODEL: VSM-300, ,MAKE: NOV BRANDT, P/N: CPSB3/4X310 |
| 162 | BRACKET, SHIPPING, HARDWARE,SHALE SHAKER | BRACKET, SHIPPING, HARDWARE, FOR SHALE SHAKER, MODEL: VSM-300, ,MAKE: NOV BRANDT, P/N: CPPLN3/4 |
| 163 | BEARING, SHALE SHAKER, MONGOOSE SHAKER | BEARING, SHALE SHAKER, MONGOOSE SHAKER, MAKE: MI SWACO, MOTOR MODEL: CDX18-5900, P/N: NJ2310E TVP2.C4.QP51 |
| 164 | MOTOR,VIBRATING,2HP,230/460V,SHALE SHKER | MOTOR, VIBRATING, 2HP, 230/460 V, 60 HZ, 3 PH, FRAME 60, FOR SHALE SHAKER, MODEL: MONGOOSE SHAKER, MAKE: MI SWACO, P/N: CDX18-5900 |
| 165 | SWITCH, SEL, 2WAY, 1POLE, SHALE SHAKER | SWITCH, SELECTOR, 2 WAYS, 1 POLE, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 7578000 |
| 166 | SWITCH, PB, EMERG STOP, SHALE SHAKER, | SWITCH, PUSH BUTTON, EMERGENCY STOP, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 7573013 |
| 167 | HANDLE, EXTERNAL FRONT, SHALE SHAKER | HANDLE, EXTERNAL FRONT, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 8045001 |
| 168 | CONTACTOR, NC, SHALE SHAKER, MONGOOSE | CONTACTOR, NORMALLY CLOSED, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 7150011 |
| 169 | CONTACTOR, NO, SHALE SHAKER, MONGOOSE | CONTACTOR, NORMALLY OPENED, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 7150012 |
| 170 | PUSH BUTTON,XHDPBS,1RED,1GREEN STOP/STAR | PUSH BUTTON, XHDPBS, 1 RED, 1 GREEN STOP START (MI SWACO P/N: FOR REFERENCE. 7573018) FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 20042 |
| 171 | CONTACT BLOCK, DT1A /BT 1B CB 1NO/1NC | CONTACT BLOCK, DT1A /BT 1B CB 1NO / 1NC (MI SWACO P/N: FOR REFERENCE. 8006281) FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 5172-1A |
| 172 | BEARING, ROLLER, SHALE SHAKER MOTOR, CDX | BEARING, ROLLER, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 506563 |
| 173 | COVER, BEARING, SHALE SHAKER MOTOR, CDX | COVER, BEARING, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 303081 |
| 174 | WEIGHT ADJ DISC, RIGHT, SHALE SHAKER MOT | WEIGHT ADJUSTMENT DISC, RIGHT, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 51 8174 |
| 175 | WEIGHT ADJ DISC, LEFT, SHALE SHAKER MOTO | WEIGHT ADJUSTMENT DISC, LEFT, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 51 8175 |
| 176 | RING, INTERNAL SNAP, SHALE SHAKER MOTOR | RING, INTERNAL SNAP, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 500008 |
| 177 | O-RING, SHALE SHAKER MOTOR, CDX18-5900 | O-RING, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 508548 |
| 178 | SCREW, SCH M3X25, SHALE SHAKER MOTOR | SCREW, SCH M3 X 25, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 509056 |
| 179 | KEY,10X8X22,SHALE SHAKER MOTOR,CDX185900 | KEY, SIZE: 10 X 8 X 22, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 506044 |
| 180 | V RING, SHALE SHAKER MOTOR, CDX18-5900 | V RING, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 502084 |
| 181 | SCREW, SCH M12X45, SHALE SHAKER MOTOR | SCREW, SCH M12 X 45, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 515612 |
| 182 | FLANGE, SHALE SHAKER MOTOR, CDX18-5900 | FLANGE, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 301254 |
| 183 | SNAP RING, SHALE SHAKER MOTOR,CDX18-5900 | SNAP RING, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 500058 |
| 184 | START PUSH-BUTTON, SHALE SHAKER, SM300 | START PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901625 |
| 185 | STOP PUSH-BUTTON, SHALE SHAKER, SM300 | STOP PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901624 |
| 186 | LOW PUSH-BUTTON, SHALE SHAKER, SM300 | LOW PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901626 |
| 187 | BOOST PUSH-BUTTON, SHALE SHAKER, SM300 | BOOST PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901627 |
| 188 | NORMAL PUSH-BUTTON, SHALE SHAKER, SM300 | NORMAL PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901628 |
| 189 | HANDLE,BUTTERFLY VALVE 10″ SHAKER,VSM300 | HANDLE, BUTTERFLY VALVE SIZE: 10″ FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV-BRANDT, VALVE MAKE: TOMOE, P/N: 001-431-065 |
| 190 | REAR SPRING, SHALE SHAKER,KING COBRA,NOV | REAR SPRING, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: LM3B13614 |
| 191 | JACK SUB-ASSY, SHALE SHAKER,KING COBRA | JACK SUB-ASSEMBLY, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 9738 |
| 192 | WEDGE, SHALE SHAKER, KING COBRA, NOV | WEDGE, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 26EZ |
| 193 | BYPASS VALVE SUB ASSY, SHALE SHAKER,KING | BYPASS VALVE SUB ASSEMBLY, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 9719 |
| 194 | SCREW, 3/4-10 UNC X 4 1/2″ XYLAN, SHAKER | SCREW, 3/4-10 UNC X 4 1/2″ XYLAN, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 22BCJ |
| 195 | NUT,HEX,3/4-10 UNC HVY HEX. XYLAN,SHAKER | NUT, HEX, 3/4-10 UNC HEAVY HEX. XYLAN, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 35FJ |
| 196 | CROWN RUBBER POLYURETHANE, BLACK,SHAKER | CROWN RUBBER POLYURETHANE, (BLACK), FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 11607 |
| 197 | GASKET, 2″ VICTAULIC, SHALE SHAKER, KING | GASKET, 2″ VICTAULIC, FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 10E |
| 198 | CLAMP, 2″VICTAULIC W/GASKET,SHALE SHAKER | CLAMP, 2″ VICTAULIC W/GASKET, FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 14A |
| 199 | CONE ASSY, COMP. (DESILTER),SHALE SHAKER | CONE ASSEMBLY, COMPLETE (DESILTER), FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 26AW |
| 200 | CAP, 2″VICTAULIC,SHALE SHAKER,KING COBRA | CAP, 2″ VICTAULIC, FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 42A |
| 201 | OVERFLOW ELBOW,SHALE SHAKER, KING COBRA | OVERFLOW ELBOW, FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 44J |
| 202 | CONE CLAMP,2BOLT COMP,SHALE SHAKER, KING | CONE CLAMP, 2-BOLT COMPLETE , FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 14P |
| 203 | HHCS, 3/8″ 16UNC X 3/4″; 22JN, SHAKER | HHCS, 3/8″ 16UNC X 3/4″; 22JN, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 22JN |
| 204 | HHCS, 3/8″ 16UNC X 1-1/2, SHALE SHAKER | HHCS, 3/8″ 16UNC X 1-1/2, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 22PY |
| 205 | NUT, HEX LOCK, 3/8″, SHALE SHAKER | NUT, HEX LOCK, 3/8″, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 35CD |
| 206 | HHCS, 3/8″-16UNC X 1-1/4″, SHALE SHAKER | HHCS, 3/8″-16UNC X 1-1/4″, GR-1 SST, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 22OS |
| 207 | HHCS, 1/2-13UNC X 3/4″, SHALE SHAKER | HHCS, 1/2-13UNC X 3/4″, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 22NB |
| 208 | PIVOT STAND, SHALE SHAKER KING COBRA | PIVOT STAND, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 9862 |
| 209 | CYLINDER, ATEX, SHALE SHAKER, AX-1,AXIOM | CYLINDER, ATEX, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF-2997 |
| 210 | BEARING, MAIN DRIVE, SHALE SHAKER, AX-1 | BEARING, MAIN DRIVE, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-BG22313-E-VA405 |
| 211 | BEARING,ROLLER,TENSION,SHALE SHAKER,AX-1 | BEARING, ROLLER, TENSION, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-BG6205 |
| 212 | SEAL, LABRYNTH, SHALE SHAKER, AX-1,AXIOM | SEAL, LABRYNTH, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0651 |
| 213 | SEAL, MAIN SHAFT,SHALE SHAKER,AX-1,AXIOM | SEAL, MAIN SHAFT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-S65100 |
| 214 | CIRCLIP,BEARING HOUSING,SHALE SHAKER,AX1 | CIRCLIP, BEARING HOUSING, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-C1300140 |
| 215 | CIRCLIP, MAIN SHAFT, SHALE SHAKER, AX-1 | CIRCLIP, MAIN SHAFT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-C140065 |
| 216 | O-RING, END CAP, SHALE SHAKER,AX-1,AXIOM | O-RING, END CAP, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-OR2495-30 |
| 217 | BELT, DRIVE,”B” SECTION 45″ SHALE SHAKER | BELT, DRIVE, “B” SECTION 45″ FRAS RATED, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-B45-DB |
| 218 | NIPPLE,GREASE, 6MM STRAIGHT,SHALE SHAKER | NIPPLE, GREASE, 6MM STRAIGHT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-GN-S06 |
| 219 | NIPPLE,GREASE, 6MM EXTENDED,SHALE SHAKER | NIPPLE, GREASE, 6MM EXTENDED, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-GN-E06 |
| 220 | BUSH, TAPERLOCK, 2012/38, SHALE SHAKER | BUSH, TAPERLOCK, 2012/38, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-T201238 |
| 221 | BUSH, TAPERLOCK, 2012/50, SHALE SHAKER | BUSH, TAPERLOCK, 2012/50, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-T201250 |
| 222 | KEY, MAIN SHAFT, SHALE SHAKER,AX-1,AXIOM | KEY, MAIN SHAFT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0291 |
| 223 | RUBBER EXTRUSION, MK IV,FIXED FRAME,AX-1 | RUBBER EXTRUSION, MK IV, FIXED FRAME, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/3769 |
| 224 | CLAMPING SYS, FIXED FRAME PNEU, SHAKER | CLAMPING SYSTEM, FIXED FRAME PNEUMATIC, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/2537 |
| 225 | PACKER, FLOW CONTROL, SHALE SHAKER, AX-1 | PACKER, FLOW CONTROL, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0378 |
| 226 | BRAIDED HOSE, LONG, CLAMPING SYS, AX-1 | BRAIDED HOSE, LONG, CLAMPING SYSTEM, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF/2569 |
| 227 | ELBOW, 1/4 NPT-NO4 JIC SWIVEL 90DEG,AX-1 | ELBOW, 1/4 NPT- NO4 JIC SWIVEL 90 DEG, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF/2576 |
| 228 | BRAIDED HOSE, SHORT, CLAMPING SYS, AX-1 | BRAIDED HOSE, SHORT, CLAMPING SYSTEM, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF/2568 |
| 229 | HOSE, PNEU PACKER, 580MM, SHALE SHAKER | HOSE, PNEUMATIC PACKER, 580MM, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF/2913 |
| 230 | FITTING TOOL, BELT, SHALE SHAKER, AX-1 | FITTING TOOL, BELT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/1163 |
| 231 | SUPPORT TOOL, SHAFT, SHALE SHAKER, AX-1 | SUPPORT TOOL, SHAFT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/1147 |
| 232 | BOLT, HEX, M12X60-A480,SHALE SHAKER,AX-1 | BOLT, HEX, SIZE: M12 X 60- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-2060-A480 |
| 233 | BOLT, M12X55-A480, SHALE SHAKER, AX-1 | BOLT, SIZE: M12 X 55- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-2055-A480 |
| 234 | BOLT, HEX, M12X40-A480,SHALE SHAKER,AX-1 | BOLT, HEX, SIZE: M12 X 40- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-2040-A480 |
| 235 | SET SCREW, M12X20-A480,SHALE SHAKER,AX-1 | SET SCREW, SIZE: M12 X 20- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-1020-A480 |
| 236 | SET SCREW, M12X25-A480,SHALE SHAKER,AX-1 | SET SCREW, SIZE: M12 X 25- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-1025-A480 |
| 237 | SET SCREW, M12X90-A480,SHALE SHAKER,AX-1 | SET SCREW, SIZE: M12 X 90- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-1090-A480 |
| 238 | WASHER,NORDLOCK,M12-SS,PAIR,SHALE SHAKER | WASHER, NORDLOCK, M12- SS (PAIR), FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-7200 |
| 239 | NUT, PLAIN, M12- SS, SHALE SHAKER, AX-1 | NUT, PLAIN, M12- SS, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-6000 |
| 240 | RELAY, THERMISTOR, SHALE SHAKER, AX-1 | RELAY, THERMISTOR, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0139 |
| 241 | OVERLOAD, 8 – 11A, SHALE SHAKER, AX-1 | OVERLOAD, 8 – 11A, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0143 |
| 242 | CONTACTOR, 15KW, SHALE SHAKER, AX-1 | CONTACTOR, 15KW, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0142 |
| 243 | MCB, 25A, 3POLE, TYPE K,ABB,SHALE SHAKER | MCB, 25A, 3 POLE, TYPE K, ABB, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0827 |
| 244 | MCB, 1A, 2POLE, TYPE K, ABB,SHALE SHAKER | MCB, 1A, 2 POLE, TYPE K, ABB, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0828 |
| 245 | MCB, 2A, 2POLE, TYPE K, ABB,SHALE SHAKER | MCB, 2A, 2 POLE, TYPE K, ABB, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0829 |
| 246 | RELAY, 5A, SHALE SHAKER, AX-1, AXIOM | RELAY, 5A, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0144 |
| 247 | RELAY, 3A, SHALE SHAKER, AX-1, AXIOM | RELAY, 3A, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0145 |
| 248 | INVERTOR DRIVE, SHALE SHAKER, AX-1,AXIOM | INVERTOR DRIVE, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0396 |
| 249 | RUBBER,MOUNTING SPRING,AX-1,SHALE SHAKER | RUBBER, MOUNTING SPRING, AX-1, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0250 |
| 250 | SPRING, MOUNTING, AX-1, SHALE SHAKER | SPRING, MOUNTING, AX-1, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0252 |
| 251 | PULLEY ASSY,TENSIONER, AX-1,SHALE SHAKER | PULLEY ASSY, TENSIONER, AX-1, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/3779 |
| 252 | DRIVE PULLEY, (MAIN SHAFT), SHALE SHAKER | DRIVE PULLEY, (MAIN SHAFT), FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0356 |
| 253 | COOLING FAN, SHALE SHAKER, AX-1, AXIOM | COOLING FAN, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0112 |
| 254 | MOTOR, DRIVE PULLEY, SHALE SHAKER, AX-1 | MOTOR, DRIVE PULLEY, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0357 |
| 255 | TENSIONER TOOL, BELT, SHALE SHAKER, AX-1 | TENSIONER TOOL, BELT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: TOOL-0681 |
| 256 | INSTALLATION TOOL, CLAMPING SYS, AX-1 | INSTALLATION TOOL, CLAMPING SYSTEM, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/3045 |
| 257 | HOUSING, MAIN BEARING, AX-1,SHALE SHAKER | HOUSING, MAIN BEARING, AX-1, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0292 |
| 258 | TENSIONER ASSY, DRIVE, SHALE SHAKER,AX-1 | TENSIONER ASSY, DRIVE, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0307 |
| 259 | SPRING, REAR, SHALE SHAKER, KING COBRA | SPRING, REAR, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID, MAKE: NOV BRANDT, P/N: LF3B13614 |
| 260 | CABLE, 6C, 19 FT, SHALE SHAKER, FLC-504 | CABLE, 6C, 19 FT, FOR SHALE SHAKER, MODEL: FLC-504, MAKE: DERRICK, P/N: 1181-01-006 |
| 261 | SCREW, SHC M10X30, SHALE SHAKER MOTOR | SCREW, SHC M10 X 30, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, MAKE: MI SWACO, P/N: 515538 |
| 262 | PLUG, 1/8 NPT,SHALE SHAKER, CDX18-5900 | PLUG, SIZE: 1/8 NPT, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 509059 |
| 263 | WEDGE, HAMMER, SHALE SHAKER, VENOM | WEDGE, HAMMER, FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, P/N: 26EZVNM |
| 264 | STRIP, LONG WEAR, SHALE SHAKER, VENOM | STRIP, LONG WEAR, FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, OLD P/N: 21970-KIT, P/N: P4A0042613-95-KIT |
| 265 | WEAR STRIP, SIDE PINNED, SHALE SHAKER | WEAR STRIP, SIDE PINNED, (NEW), FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, P/N: 21184 |
| 266 | PIN ASSEMBLY, LOCK, SHALE SHAKER, VENOM | PIN ASSEMBLY, LOCK, FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, P/N: LM3S00103 |
| 267 | RELAY, OVERLOAD, SHALE SHAKER, VENOM | RELAY, OVERLOAD, FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, P/N: 24XP |
| 268 | FAN, COOLING, SHALE SHAKER, AX1, AXIOM | FAN, COOLING, FOR SHALE SHAKER, MODEL: AX1, MAKE: AXIOM, P/N: ELEC-0461 |
| 269 | WASHER, NORDLOCK, M12, LARGE OD, SS | WASHER, NORDLOCK, M12, LARGE OD, SS (PAIR), FOR SHALE SHAKER, MODEL: AX1, MAKE: AXIOM, P/N: MF-12S-7200-SPA480 |
| 270 | SCREW, SET, M12X30 -A480, SHALE SHAKER | SCREW, SET, M12X30 -A480, FOR SHALE SHAKER, MODEL: AX1, MAKE: AXIOM, P/N: MF12S-1030-A480 |
| 271 | SPRING, SPOOL, SHALE SHAKER, MONGOOSE | SPRING, SPOOL, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: BM6K80290 |
| 272 | PLATE, FRONT DEFLECTOR, SHALE SHAKER | PLATE, FRONT DEFLECTOR, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT, P/N: 300/02/006 |
| 273 | SCREW, CAP, SOCKET HEAD, M6 X 15LG | SCREW, CAP, SOCKET HEAD, M6 X 15LG, FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: SSCSK M6X15 |
| 274 | SCREW, CAP, SOCKET HEAD, M8 X 30LG | SCREW, CAP, SOCKET HEAD, M8 X 30LG, FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: SSSKT M8X30 |
| 275 | WASHER, NORD-LOCK, M8, SHALE SHAKER | WASHER, NORD-LOCK, M8, FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: SSNLW M8 |
| 276 | SCREW, SOCKET HEAD,M12X25LG,SHALE SHAKER | SCREW, SOCKET HEADED, M12 X 25 LONG , FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: SSSKT M12X25 |
| 277 | BAR, WEIR, SHALE SHAKER, VSM 300, NOV | BAR, WEIR, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: 300/02/016 |
| 278 | WASHER, PLAIN, M12, SHALE SHAKER,VSM 300 | WASHER, PLAIN, M12, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: SSPLWM12 |
| 279 | CHUTE, FEED, SHALE SHAKER, VSM 300, NOV | CHUTE, FEED, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: 300/05/002 |
| 280 | REGULATOR, AIR, SHALE SHAKER, AX-1,AXIOM | REGULATOR, AIR, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2447 |
| 281 | SWITCH, LATERAL, 3/2, SHALE SHAKER, AX-1 | SWITCH, LATERAL, 3/2, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2451 |
| 282 | SWITCH, LATERAL, 5/2, SHALE SHAKER, AX-1 | SWITCH, LATERAL, 5/2, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2453 |
| 283 | HOUSING, FABRICATION,SHALE SHAKER,VSM300 | HOUSING, FABRICATION, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: 300/01/002 |
| 284 | BOLT, HEX HEAD, M20X110, SHALE SHAKER | BOLT, HEX HEAD, SIZE: M20 X 110, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: SSHHB M20X110 |
| 285 | NUT, HEX HEAD, M20, SHALE SHAKER, VSM300 | NUT, HEX HEAD, M20, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: SSPLN M20 |
| 286 | HOUSING ASSY., PRIMARY CLUMP WEIGHT | HOUSING ASSY., PRIMARY CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: BRANDT, P/N: 300/01/001a |
| 287 | HOUSING ASSY., PRIMARY CLUMP WEIGHT | HOUSING ASSY., SECONDARY CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: BRANDT, P/N: 300/01/001b |
| 288 | BOLT, LONG WEAR STRIP, SHALE SHAKER, NOV | BOLT, LONG WEAR STRIP, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV, P/N: 22XQ |
| 289 | NUT, SHALE SHAKER, KING COBRA, NOV | NUT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV, P/N: 35AR |
| 290 | WASHER, SHALE SHAKER, KING COBRA, NOV | WASHER, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV, 36AN |
| 291 | SCREW, CAP,SOC HD, M12X20LG,SHALE SHAKER | SCREW, CAP, SOCKET HEAD, M12 X 20 LG, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV, P/N: SSSKT M12X20 |
| 292 | SCREW, SET, M8X16-A480,SHALE SHAKER,AX-1 | SCREW, SET, M8 X 16 – A480, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF08S-1016-A480 |
| 293 | WASHER,NORDLOCK,M8,SS(PAIR),SHALE SHAKER | WASHER, NORDLOCK, M8, SS (PAIR), FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF08S-7200-A480 |
| 294 | RELAY, THERMAL OVERLOAD, 5.5-7.5A, 460V | RELAY, THERMAL OVERLOAD, 5.5-7.5A, 460V, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7152032 |
| 295 | TRANSFORMER, 460V, SHALE SHAKER,MONGOOSE | TRANSFORMER, 460V, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7790017 |
| 296 | BASE, RELAY, SHALE SHAKER, MONGOOSE PRO | BASE, RELAY, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7150016 |
| 297 | RELAY, DPDT, 10A, 120 VAC, SHALE SHAKER | RELAY, DPDT, 10A, 120 VAC, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7150015 |
| 298 | BREAKER, CIRCUIT, 460 V, SIZE 4.5-6.3 A | BREAKER, CIRCUIT, 460 V, SIZE 4.5-6.3 A, SIEMENS 3RV10 21 1GA10 (ATEX ONLY), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7510046 |
| 299 | BLOCK, AUX CONTACT, 1NO+1NC (ATEX ONLY) | BLOCK, AUX CONTACT, 1NO+1NC (ATEX ONLY), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7573502 |
| 300 | TRANSFORMER,0-230-400-460-600-690/0-100V | TRANSFORMER, 0-230-400-460-600-690/0-100 V (ATEX ONLY), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 00A15C012.066 |
| 301 | CONTACTOR, 5.5 KW, 110 VAC (ATEX ONLY) | CONTACTOR, 5.5 KW, 110 VAC (ATEX ONLY), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7573503 |
| 302 | BREAKER, CIRCUIT, MINIATURE, 3A, 1P, ABB | BREAKER, CIRCUIT, MINIATURE, 3A, 1 POLE, ABB S201UP-K3, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7510037 |
| 303 | BREAKER, CIRCUIT, MINIATURE, 1A, 2P, ABB | BREAKER, CIRCUIT, MINIATURE, 1 A, 2 POLE, ABB S202UP-K1, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7510038 |
| 304 | SCREW, SOCKET HEAD, A4-70, M5 X 12 C/S | SCREW, SOCKET HEAD, A4-70, M5 X 12 C/S, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF05S-3012-A4-70 |
| 305 | ELBOW, PUSH IN, 1/4″BSPX8MM,SHALE SHAKER | ELBOW, PUSH IN, 1/4″ BSP X 8MM, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2405 |
| 306 | STRAIGHT,PUSH IN,1/8″BSPX4MM,SHALESHAKER | STRAIGHT, PUSH IN, 1/8″ BSP X 4MM, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2430 |
| 307 | PUSH BUTTON, MUSHROOM HEAD, SHALE SHAKER | PUSH BUTTON, MUSHROOM HEAD, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2626 |
| 308 | PIECE, Y, PUSH IN, 4MM,SHALE SHAKER,AX-1 | PIECE, Y, PUSH IN, 4MM, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2725 |
| 309 | BUTTON, START, W/GREEN BOOT,SHALE SHAKER | BUTTON, START, W/GREEN BOOT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT (NOV), P/N: 24LN |
| 310 | BUTTON, STOP, W/RED BOOT, SHALE SHAKER | BUTTON, STOP, W/RED BOOT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT (NOV), P/N: 24LO |
| 311 | ELBOW, PUSH-IN, 1/8″ BSP X 4 MM, 90 DEG | ELBOW, PUSH-IN, SIZE: 1/8″ BSP X 4 MM, 90 DEG, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2468 |
| 312 | ELBOW, PUSH-IN, 1/4″ BSP X 8 MM, 90 DEG | ELBOW, PUSH-IN, SIZE: 1/4″ BSP X 8 MM, 90 DEG, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2724 |
| 313 | VALVE, VENTARI, SHALE SHAKER, AX-1,AXIOM | VALVE, VENTARI, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-3022 |
| 314 | ELBOW, PUSH-IN, 1/8″ BSP X 8 MM, 90 DEG | ELBOW, PUSH-IN, SIZE: 1/8″ BSP X 8 MM, 90 DEG, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2406 |
| 315 | REGULATOR, AIR, W/GAGE, SHALE SHAKER | REGULATOR, AIR, W/GAGE, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 29AC |
| 316 | ACTUATOR, AIR, 20-2, SHALE SHAKER, KING | ACTUATOR, AIR, 20-2, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 59RL |
| 317 | VALVE, CHECK, SHALE SHAKER, KING COBRA | VALVE, CHECK, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 31BV |
| 318 | CROSS, BP, FEMALE NPT, SHALE SHAKER,KING | CROSS, BP, FEMALE NPT, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47MU |
| 319 | ADAPTOR, 5/32 PILOT-1/4 NPT,SHALE SHAKER | ADAPTOR, 5/32 PILOT-1/4 NPT, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47NY |
| 320 | FITTING, HOSE, PUSHLOK 3/8 X 1/4 FNPT | FITTING, HOSE, PUSHLOK 3/8 X 1/4 FNPT, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47NB |
| 321 | CONNECTOR, MALE, NPT 5/32 PILOT TUBE | CONNECTOR, MALE, NPT FOR 5/32 PILOT TUBE, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47NZ |
| 322 | LEGEND, “DOWN”, SHALE SHAKER, KING | LEGEND, “DOWN”, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47QD |
| 323 | LEGEND, “UP”, SHALE SHAKER, KING | LEGEND, “UP”, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47QC |
| 324 | FITTING, HOSE, PUSHLOK 3/8 X 1/4 MNPT | FITTING, HOSE, PUSHLOK 3/8 X 1/4 MNPT, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47MY |
| 325 | STRIP, LONG WEAR, HI TEMP, SHALE SHAKER | STRIP, LONG WEAR, HIGH TEMPERATURE, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: M4A0043896-95-KIT |
| 326 | SEAL, REAR, FIXED FRAME, SHALE SHAKER | SEAL, REAR, FIXED FRAME, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: APL/2467 |
| 327 | CHANNEL ASSY,FIXED FRAME,LH,SHALE SHAKER | CHANNEL ASSEMBLY, FIXED FRAME, LH, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: APL/2477 |
| 328 | CHANNEL ASSY,FIXED FRAME,RH,SHALE SHAKER | CHANNEL ASSEMBLY, FIXED FRAME, RH, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: APL/2478 |
| 329 | BOLT, HEX HEAD, M12X45,-A480, AX-1,AXIOM | BOLT, HEX HEAD, M12X45,-A480, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF12S-2045-A480 |
| 330 | NUT, PLAIN, M12,-A480, SHALE SHAKER,AX-1 | NUT, PLAIN, M12,-A480, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF12S-6000-A480 |
| 331 | WASHER, NORDLOCK, M12, A480(PAIR),AX-1 | WASHER, NORDLOCK, M12, A480(PAIR), FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF12S-7200-A480 |
| 332 | SCREW, CAP, HEX HEAD, 3/4″ 10UNC X 3″ | SCREW, CAP, HEX HEAD, 3/4″ 10UNC X 3″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 22NC |
| 333 | SCREW, 3/4″ 10UNC X 2-1/2″, SHALE SHAKER | SCREW, 3/4″ 10UNC X 2-1/2″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 22XU |
| 334 | WASHER, BEVEL, 3/4″, SHALE SHAKER | WASHER, BEVEL, 3/4″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 36AD |
| 335 | NUT, HEX. LOCK 3/4″, SHALE SHAKER | NUT, HEX. LOCK 3/4″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 35AV |
| 336 | WASHER, FLAT 3/8″, SHALE SHAKER | WASHER, FLAT 3/8″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 36BL |
| 337 | SCREW, CAP, HEX HEAD, 1/2″ 13UNC X 6″ | SCREW, CAP, HEX HEAD, 1/2″ 13UNC X 6″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 22AU |
| 338 | SCREW, JACK, WELDMENT, SHALE SHAKER | SCREW, JACK, WELDMENT, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 9856 |
| 339 | FITTING, GREASE, SHALE SHAKER, KING | FITTING, GREASE, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 33B |
| 340 | WASHER, FLAT, 1/2″, SHALE SHAKER, KING | WASHER, FLAT, 1/2″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 36CG |
| 341 | WASHER, FLAT, 3/4″, SHALE SHAKER, KING | WASHER, FLAT, 3/4″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 36BK |
| 342 | JACK WELDMENT, SHALE SHAKER, KING | JACK WELDMENT, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 9702 |
| 343 | SCREW, CAP, HEX HEAD, 1/2″ 13 UNCX1-1/2″ | SCREW, CAP, HEX HEAD, 1/2″ 13 UNC X 1-1/2″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 22NP |
| 344 | NUT, HEX LOCK, 1/2″ 13UNC, SHALE SHAKER | NUT, HEX LOCK, 1/2″ 13UNC, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 35CR |
| 345 | GLAND M25,FOR SHALE, VSM | GLAND M25,FOR SHALE SHAKER MODEL: VSM-300, MAKE- NOV BRANDT, PART NO: 300/03/038 |
| 346 | BOLT, HEX HEAD, M24X80, SS, SHALE SHAKER | BOLT, HEX HEAD, M24 X 80, SS, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF24S-2080-A480 |
| 347 | NUT, PLAIN, M24, A480, SHALE SHAKER,AX-1 | NUT, PLAIN, M24, A480, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF24S-6000-A480 |
| 348 | WASHER, NORDLOCK, M24, SS, SHALE SHAKER | WASHER, NORDLOCK, M24, SS, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF24S-7200-A480 |
| 349 | PLUG, KING COBRA VENOM BACKTANK | PLUG, KING COBRA VENOM BACKTANK, FOR SHALE SHAKER, MODEL: KING COBRA VENOM SHAKER, MAKE: NOV, P/N: 42DO |
| 350 | COVER,WEIGHT,SHALE SHAKER,KING COBRA,NOV | COVER, WEIGHT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 517078 |
| 351 | GUARD ASSEMBLY, MOTOR CPLNG,SHALE SHAKER | GUARD ASSEMBLY, MOTOR COUPLING, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: 300/01/022 |
| 352 | GUARD, MOTOR COUPLING, SHALE SHAKER | GUARD, MOTOR COUPLING, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: 300/01/023 |
| 353 | SCREW, HEX HEAD, M16 X 55LG, SHALE SHAKE | SCREW, HEX HEAD, SIZE: M16 X 55LG, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: SSHHS M16X55 |
| 354 | NUT, HEX HEAD, M16, SHALE SHAKER | NUT, HEX HEAD, M16, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: SSPLN M16 |
| 355 | GLAND, M20, DOUBLE COMPRESSION EXD/EXE | GLAND, M20, DOUBLE COMPRESSION EXD/EXE, FOR SHALE SHAKER, MODEL, VSM 300, MAKE: NOV, P/N: 300/03/039 |
| 356 | WASHER, LOCK, 1″, SHALE SHAKER, MONGOOSE | WASHER, LOCK, 1″, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 05-110 |
| 357 | CONNECTOR, WIRE, 1/4″, SHALE SHAKER | CONNECTOR, WIRE, 1/4″, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 6592002 |
| 358 | SCREW,CAP,HEX HD,M6X20MM LG,SHALE SHAKER | SCREW, CAP, HEX HD, M6 X 20 MM LG, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 04-1208 |
| 359 | NUT, HEX, M6, SHALE SHAKER, MONGOOSE | NUT, HEX, M6, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 03-236 |
| 360 | REDUCER, BUSHING, 3/4″ MNPT X 20 MM FNPT | REDUCER, BUSHING, 3/4″ MNPT X 20 MM FNPT, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-1880 |
| 361 | ELBOW, STREET 90 DEG, 20 MM,SHALE SHAKER | ELBOW, STREET 90 DEG, 20 MM, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-1876 |
| 362 | TAB, GROUND, SHALE SHAKER, MONGOOSE | TAB, GROUND, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-1882 |
| 363 | GLAND,CABLE,20 MM 3/4″CABLE,SHALE SHAKER | GLAND, CABLE, 20 MM FOR 3/4″ CABLE, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-1875 |
| 364 | WASHER,LOCK,M6 REG,SHALE SHAKER,MONGOOSE | WASHER, LOCK, M6 REG, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 05-269 |
| 365 | WEAR STRIP, LONG, SHALE SHAKER, NOV | WEAR STRIP, LONG, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: M4A0049134-KIT |
| 366 | WEAR STRIP, SIDE PINNED,SHALE SHAKER,NOV | WEAR STRIP, SIDE PINNED, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: M4A0049614-KIT |
| 367 | SCREW ASSEMBLY, JACK, SHALE SHAKER, NOV | SCREW ASSEMBLY, JACK, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: 23272 |
| 368 | ACCELEROMETER, SHALE SHAKER, NOV | ACCELEROMETER, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0042334 |
| 369 | ELBOW, ELECTRICAL, SHALE SHAKER, NOV | ELBOW, ELECTRICAL, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0048358 |
| 370 | REDUCER, ELECTRICAL, SHALE SHAKER, NOV | REDUCER, ELECTRICAL, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0054315 |
| 371 | GLAND, ELECTRICAL, 500 NPT, SHALE SHAKER | GLAND, ELECTRICAL, 500 NPT, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0053968 |
| 372 | CABLE, SIGNAL, SHALE SHAKER, NOV | CABLE, SIGNAL, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0043465 |
| 373 | CABLE, POWER, SHALE SHAKER, NOV | CABLE, POWER, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0053967 |
| 374 | BODY, 75-1.0 STAUFF DUAL DIN 3,SH/SHAKER | BODY, 75-1.0 STAUFF DUAL DIN 3, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047178 |
| 375 | COVER, PLATE STAUFF DIN 3,SHALE SHAKER | COVER, PLATE STAUFF DIN 3,FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047180 |
| 376 | BOLT, STAUFF CLAMP DUAL DIN 3,SH/ SHAKER | BOLT, STAUFF CLAMP DUAL DIN 3,FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047181 |
| 377 | CLAMP BODY STAUFF SINGLE DIN 3,SH/SHAKER | CLAMP BODY STAUFF SINGLE DIN 3, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047979 |
| 378 | CLAMP COVER STAUFF SINGLE DIN, SH/SHAKER | CLAMP COVER STAUFF SINGLE DIN, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047980 |
| 379 | CLAMP BOLT STAUFF SINGLE DIN 3,SH/SHAKER | CLAMP BOLT STAUFF SINGLE DIN 3, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047981 |
| 380 | CONTACTOR, REVERSING, SHALE SHAKER | CONTACTOR, REVERSING, 16A, 1 N.O. 1 N.C, FOR SHALE SHAKER, MODEL: MI SWACO, MAKE: ALLEN-BRADLEY / ROCKWELL AUTOMATION, OLD P/N: 104-C16D22-X6, P/N: 104-C16D22 |
| 381 | PULLEY,DRIVE-BELT V255 PUMP,SHALE SHAKER | PULLEY, DRIVE-BELT V255 PUMP, FOR SHALE SHAKER, MODEL: FLC504, MAKE: DERRICK SOLUTIONS INTERNATIONAL, P/N: G0014441 |
| 382 | COVER, WEIGHT, SHALE SHAKER, KING COBRA | COVER, WEIGHT, FOR SHALE SHAKER, MODEL: BRANDT KING COBRA, MAKE: NOV BRANDT, P/N: 517062 |
| 383 | O-RING, SHALE SHAKER, SHALE SHAKER | O-RING, FOR SHALE SHAKER, FOR SHALE SHAKER, MODEL: BRANDT KING COBRA, MAKE: NOV BRANDT, P/N: 508629 |
| 384 | KIT, CRITICAL SPARE PARTS, SHALE SHAKER | KIT, RIG CRITICAL SPARE PARTS, 380-415 VOLT, 50HZ, ATEX WEIGHT: 410.000 LBS, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, MAKE: SCHLUMBERGER, P/N: 9350054 |
| 385 | GROMMET, RECT NYLON WHITE, SHALE SHAKER | GROMMET, RECT NYLON WHITE, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 07-443 |
| 386 | TRANSFORMER, (380 V), SHALE SHAKER | TRANSFORMER, (380 V), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 7790018 |
| 387 | BLOCK, POWER DISTRIBUTION, SHALE SHAKER | BLOCK, POWER DISTRIBUTION, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 7150014 |
| 388 | CIRCUIT BREAKER, 380V, SHALE SHAKER | CIRCUIT BREAKER, 380V, SIZE: SO 5.5-8A (SIEMENS 3RV10 21 1HA10) ATEX/IECEX ONLY, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 7510024 |
| 389 | SHAFT, CLUMP WEIGHT ASSY, SHALE SHAKER | SHAFT, FOR CLUMP WEIGHT ASSY, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: 300/01/005, P/N: VSM3-01-01-C3 |
| 390 | KEY- CLUMP WEIGHT, SHALE SHAKER, VSM300 | KEY- CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: 300/01/006 |
| 391 | KEY- MOTOR SHAFT COUPLING, SHALE SHAKER | KEY- MOTOR SHAFT COUPLING, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: 300/01/007 |
| 392 | PRIMARY CLUMP WEIGHT,SHALE SHAKER,VSM300 | PRIMARY CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: 300/01/009, P/N: VSM3-01-01-C7 |
| 393 | SECONDARY CLUMP WEIGHT, SHALE SHAKER | SECONDARY CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: 300/01/010, P/N: VSM3-01-01-C8 |
| 394 | END CAP, SHALE SHAKER, VSM300, NOV | END CAP, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: 300/01/003, P/N: VSM3-01-01-C1 |
| 395 | HEX HEAD SCREW-M12 X 40 LG, SHALE SHAKER | HEX HEAD SCREW-M12 X 40 LG, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: SSSKT M12 X 40, P/N: 001-201-1208 |
| 396 | MUD GUN, RESERVE TANK, SHALE SHAKER TANK | MUD GUN, RESERVE TANK 1-3, MIXING & SUCTION TANK, SOLIDS CONTROL SYSTEM, FOR SHALE SHAKER TANK, MODEL: GK218.06.02.00, MAKE: HH, P/N: 1200366790 |
| 397 | BOLT ASSY, SG MOTOR, SHALE SHAKER | BOLT ASSY, SG MOTOR, ( 3/4-16 L9 HARDWARE), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0001973 |
| 398 | MOTOR CORD ASSY(19 FT), SHALE SHAKER | MOTOR CORD ASSY(19 FT), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 11881-01-006 |
| 399 | MOTOR CORD ASSY(15 FT), SHALE SHAKER | MOTOR CORD ASSY(15 FT), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 11881-01-003 |
| 400 | JUNCTION BOX, SHALE SHAKER | JUNCTION BOX (EP 3/4 NPT W/4 TERMINAL), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0004586 |
| 401 | CLOSE NIPPLE (3/4 NPT), SHALE SHAKER | CLOSE NIPPLE (3/4 NPT), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: NPLE-75-COND |
| 402 | SEAL OFF (3/4 NPT), SHALE SHAKER | SEAL OFF (3/4 NPT), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: CRH-EYS-216 |
| 403 | PANEL ASSY, REPLACEMENT, SHALE SHAKER | PANEL ASSEMBY, REPLACEMENT WIRED STARTER, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 5002215 |
| 404 | PLUG, 75 NPT, SHALE SHAKER, DERRICK | PLUG, 75 NPT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: SHPP-75 |
| 405 | TENSIONING SIDE FINGER, SHALE SHAKER | TENSIONING SIDE FINGER, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 14611-01 |
| 406 | ADJUSTING BOLT, TENS SIDE, SHALE SHAKER | ADJUSTING BOLT, FOR TENSIONING SIDE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005479 |
| 407 | ADJUSTING NUT, TENSI SIDE, SHALE SHAKER | ADJUSTING NUT, FOR TENSIONING SIDE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005428 |
| 408 | ORING, 2-3/4 ID X 3/32THICK,SHALE SHAKER | ORING, 2-3/4 ID X 3/32 THICK, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0003319 |
| 409 | AWD ASSEMBLY COMPLETE, SHALE SHAKER | AWD ASSEMBLY COMPLETE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 15646-01 |
| 410 | FINGERS GUIDE, SHALE SHAKER, FLC 503 | FINGERS GUIDE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 14616-01 |
| 411 | CAM HOUSING TENSIONING SIDE,SHALE SHAKER | CAM HOUSING TENSIONING SIDE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 14617-01 |
| 412 | TENSIONING NUT, SHALE SHAKER, FLC 503 | TENSIONING NUT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005480 |
| 413 | SPRING, FINGERS RETURN, SHALE SHAKER | SPRING, FINGERS RETURN, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005466 |
| 414 | BOLT, 3/8-24X1-1/2″ LONG, SHALE SHAKER | BOLT, 3/8-24 X 1 1/2″ LONG HEX HEAD, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0002401 |
| 415 | WASHER, 3/8 FLAT, SHALE SHAKER, FLC 503 | WASHER, 3/8 FLAT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: WFSS-38-SAE |
| 416 | NY-LOK, 3/8-24, SHALE SHAKER, FLC 503 | NY-LOK, 3/8-24, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0002402 |
| 417 | BOLT, 3/8-24 X 1 1/4″ LONG,SHALE SHAKER | BOLT, 3/8-24 X 1 1/4″ LONG HEX HEAD, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0002400 |
| 418 | BLIND RIVET,6.0MM DIA.16 MM,SHALE SHAKER | BLIND RIVET, 6.0 MM DIA. 16.0 MM LONG, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0003787 |
| 419 | CLOSE-OFF PLATE, SHALE SHAKER, FLC 503 | CLOSE-OFF PLATE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 14625-01 |
| 420 | O-RING, 4 3/8 ID X1/8 THICK,SHALE SHAKER | O-RING, 4 3/8 ID X 1/8 THICK, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: ORVI-ARP-245 |
| 421 | ABDJUSTING NUT,EXTRAC TOOL,SHALE SHAKER | ABDJUSTING NUT, EXTRACTION TOOL, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 16070-01 |
| 422 | LOWER CROSS ASSY, SHALE SHAKER, FLC 503 | LOWER CROSS ASSEMBLY, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 15643-03 |
| 423 | UPPER CROSS ASSY, SHALE SHAKER, FLC 503 | UPPER CROSS ASSEMBLY, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 15643-02 |
| 424 | MECHANICAL JACK, SHALE SHAKER, FLC 503 | MECHANICAL JACK, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005849 |
| 425 | ELEVATOR BOLT, SHALE SHAKER, FLC 503 | ELEVATOR BOLT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: OTCB-25X100X38 |
| 426 | BOLT, (1″-8 X 3 1/2 SS), SHALE SHAKER, F | BOLT, (1″-8 X 3 1/2 SS), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0004582 |
| 427 | HANDLE CLIP, SHALE SHAKER, FLC 503 | HANDLE CLIP, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005177 |
| 428 | NUT, (1″ THIN NYLOC), SHALE SHAKER, FLC | NUT, (1″ THIN NYLOC), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0004581 |
| 429 | UPRIGHT SHAFT, SHALE SHAKER, FLC 503 | UPRIGHT SHAFT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 15643-05 |
| 430 | HANDLE CLIP MOUNTING HANDLE,SHALE SHAKER | HANDLE CLIP MOUNTING HANDLE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 16001-00 |
| 431 | UPRIGHT SHAFT TO UPPER CROSS ASSY,SHAKER | UPRIGHT SHAFT TO UPPER CROSS ASSY, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 16538-17 GROUND WIRE 9″ |
| 432 | LOWER CROSS ASSY TO UPPER/HOPPER, SHAKER | LOWER CROSS ASSY TO UPPER/HOPPER, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 16538-27 GROUND WIRE 26″ |
| 433 | MOTOR COUPLING GUARD ASSY, SHALE SHAKER | MOTOR COUPLING GUARD ASSEMBLY, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: VSM3-01-03-C1 |
| 434 | SOCKET HEADED CAP SCREW, SHALE SHAKER | SOCKET HEADED CAP SCREW M12X16 LG SS 316, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: SSSKTM12X16 |
| 435 | WASHER WEDGELCK M12, FOR SHALE SHAKER | WASHER WEDGELCK M12 SS 316, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: 001-09B-112 |
| 436 | BEARING, SHALE SHAKER,NJ306ECP/C4VQ015 | BEARING, MONGOOSE, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: SKF, P/N: NJ306ECP/C4VQ015 |
| 437 | WEIGHT COVER, SHALE SHAKER, 306170 | WEIGHT COVER, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 306170 |
| 438 | TERMINAL BOX COVER, SHALE SHAKER, 309040 | TERMINAL BOX COVER, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 309040 |
| 439 | SCREW HEX HD PLT, SHALE SHAKER,103057229 | SCREW HEX HD PLT M16.5X100MM LONG, GRADE:10.9, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 103057229 |
| 440 | NUT HEX PLT, SHALE SHAKER, 103057259 | NUT HEX PLT M16.5, GRADE: 10.9, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 103057259 |
| 441 | WASHER FLAT, SHALE SHAKER, 1345123-MI | WASHER FLAT BLACK F436 11/16 IDX1-3/16 ODX.108 IN THICK, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 1345123-MI |
| 442 | AWD ASSY, FLC-504, DERRICK | AWD ASSEMBLY, FOR SHALE SHAKER, MODEL: FLC 504, MAKE: DERRICK, P/N: 1609-01 |
| 443 | BOLT HHCS 1/2″ 13 UNC X 8 1/2″,SHAKER | BOLT HHCS 1/2″ 13 UNC X 8 1/2″, FOR SHALE SHAKER, MODEL: KING COBRA – M4A0046232, MAKE: NOV, P/N: 22AGI |
| 444 | SHIPPING BRACKET SPACER,SHALESHAKER,20AZ | SHIPPING BRACKET SPACER, FOR SHALE SHAKER, MODEL: KING COBRA – M4A0046232, MAKE: NOV, P/N: 20AZ |
| 445 | ABB AF16-30-10-14 ,CONTACTOR,SHALESHAKER | ABB AF16-30-10-14 , 250-500V50/60HZ-DC CONTACTOR, FOR NOV SHALE SHAKER, MAKE: KING KOBRA, NOV P/N: 21F0008, P/N: 24QM |
| 446 | MECHANICAL JACK, SHALE SHAKER, G0005848 | MECHANICAL JACK, FOR SHALE SHAKER, MODEL: FLC-504, MAKE: DERRICK, P/N: G0005848 |
| 447 | ASSY COMPLETE, JACKING, SHALE SHAKER | ASSEMBLEY COMPLETE, JACKING, FOR SHALE SHAKER, MODEL: FLC-504, MAKE: DERRICK, P/N: 16091-01 |
| 448 | ABB OVERLOAD EF19-6.3, SHALE SHAKER | ABB OVERLOAD EF19-6.3, RATING 1.9 : 6.3 AMP, FOR SHALE SHAKER, MODEL: KING KOBRA, MAKE: NOV, OLD P/N: EF19-6.3, P/N: 18664090-001 |
| 449 | VIBRATORY MOTOR,VMX 18-10900,SHALESHAKER | VIBRATORY MOTOR, MODEL : VMX 18 – 10900, FRAME:80, HP: 3.5, FOR SHALE SHAKER, MODEL: KING COBRA II, MAKE: BRANDT, P/N: 1DBX |
| 450 | MOTOR BRANDT, 220-240/440-480V, SHAKER | MOTOR BRANDT, 220-240/440-480V FRAME SIZE: 80, HP: 3.5, WATTS:2611, 3-PHASE, 60HZ, RPM:1800, BRANDT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV, P/N: 1DBX |
| 451 | STARTER ASSY, SHALE SHAKER,10441 | STARTER ASSY,460 V 60 HZ 2.9-4 FLA, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 10441 |
| 452 | ROTARY SWITCH HANDLE, SHALE SHAKER | ROTARY SWITCH HANDLE, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: PX99900540 |
| 453 | CONTACTOR, A-B, 460V,SHALE SHAKER, 24QM | CONTACTOR, A-B, 460V, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24QM |
| 454 | BIMETALIC OVERLOAD, A-B IEC,SHALE SHAKER | BIMETALIC OVERLOAD (OLD), A-B IEC, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NU |
| 455 | BIMETALIC OVERLOAD, SHALE SHAKER, 24NV | BIMETALIC OVERLOAD, A-B IEC, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NV |
| 456 | ADAPTERS (OLD), SHALE SHAKER, 24NT | ADAPTERS (OLD), A-B OVERLOAD MOUNTING, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NT |
| 457 | ADAPTERS, SHALE SHAKER, 24NY | ADAPTERS, A-B OVERLOAD MOUNTING, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NY |
| 458 | START INTERLOCK, A-B,SHALE SHAKER, 24QH | START INTERLOCK, A-B, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24QH |
| 459 | SHIELD, TAMPER,SHALE SHAKER, 24NS | SHIELD, TAMPER, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NS |
| 460 | PURCHASED IN A KIT,SHALE SHAKER, 24MQ | PURCHASED IN A KIT, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24MQ |
| 461 | VIBRATOR MOTOR, TYPE VMX18-8300 | VIBRATOR MOTOR, TYPE VMX18-8300.MANUFACTURED BY ITALVIBRAS, FRAME SIZE 70,HP 2.5,WATT 1865,VOLTS 220-240/440-480,AMP 7.0/3.5,PH 3, FREQ 60 HZ,RPM 1800,MOTOR HAVING 06 NO’S OF FOUNDATION BOLTS, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 01-2054 |
| 462 | CONTACTOR, SHALE SHAKER, AF26-30-00-14 | CONTACTOR, 03, POLE, AF26, 250-500V50/60HZ-DC, COIL VOLTAGE 480VAC, 50/60HZ, FOR NOV SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: ABB, P/N: AF26-30-00-14 |
| 463 | KIT, SINGLE MOUNTING,SHALE SHAKER,DB19EF | KIT, SINGLE MOUNTING, DB19, FOR NOV SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: ABB, P/N: DB19EF |
| 464 | SCREEN PLUGVSM-300, MAKE – BRANDT | SCREEN PLUG FOR SHALE SHAKER SCREEN, MODEL VSM – 300, MAKE – BRANDT, OLD P/N: AWC-2, P/N: MISC-AWC2 |
| 465 | END CAP, SHALE SHAKER SCREEN, 300/01/003 | END CAP, FOR SHALE SHAKER SCREEN, MODEL: VSM300, MAKE: NOV, P/N: 300/01/003 |
| 466 | SEAL HOUSING, SHALE SHAKER, 300/01/004 | SEAL HOUSING, FOR SHALE SHAKER SCREEN, MODEL: VSM300, MAKE: NOV, P/N: 300/01/004 |
| 467 | TOP SCREEN PNEUMOSEAL, VSM-300, NOV | TOP SCREEN PNEUMOSEAL FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/2/008 |
| 468 | TOP SCREEN PNEUMOSEAL, VSM 300, NOV | TOP SCREEN PNEUMOSEAL FOR SHALE SHAKER, MODEL VSM 300, MAKE : BRANDT, P/N: 300/02/008 |
On-Site Field Failure Repair Cases
Case 1: VSM-300 Shaker Screen Tension Failure
A land rig reported uneven solids separation and screen tearing due to worn adjustable side fingers and loose lock bolts. Technicians replaced the worn 14611-01 adjustable fingers and installed new lock bolts, resetting screen tension to OEM specs. Solids removal efficiency was restored within 45 minutes, eliminating unplanned rig downtime.
Case 2: Mongoose Pro Shaker Motor Vibration & Bearing Failure
An offshore rig experienced excessive motor vibration and overheating caused by failed NJ2310E roller bearings. Crews installed replacement bearings and fresh Kluber lubricant, rebalancing the motor assembly. The motor returned to normal 1800 RPM operation, avoiding a full motor replacement and saving 8+ hours of repair time.
Case 3: King Cobra Shaker Seal Leakage
A drilling rig encountered mud leakage from the rear screen seal due to degraded VITON seal bars. Replacing the worn primary/secondary pneumoseals with OEM-grade replacements stopped fluid bypass immediately, preventing mud contamination and maintaining consistent shaker performance.
Procurement Guidance & Value Assurance
Optimize your rig’s uptime and maintenance efficiency by stocking these high-quality shale shaker parts tailored to your Derrick FLC504, MI SWACO Mongoose, or NOV Brandt VSM-300 equipment. Each component is engineered to meet strict industry quality standards, providing a reliable replacement solution that reduces long-term operational costs and minimizes drilling disruptions. Whether you need bulk fasteners, critical motor components, screen repair kits, or full assembly parts, this lineup serves as your definitive procurement and technical reference for shale shaker maintenance. Select the exact part numbers matching your equipment model to ensure seamless compatibility, and leverage the detailed maintenance guidelines to proactively prevent costly equipment failures.
